Timetec 1TB SSD 3D NAND QLC SATA III 6Gb/s M.2 2280 NGFF Read Speed Up to 550MB/s SLC Cache Performance Boost Internal Solid State Drive for PC Computer Laptop and Desktop (Pinnacle)
Status: Timetec 1TB SSD 3D NAND QLC SATA III 6Gb/s M.2… (1TB NVMe SSD): Unavailable on Amazon as of . Closest in-stock match (same 1TB NVMe): Transcend MTS825 1TB M.2 2280 SATA III SSD, $193.99 on Amazon as of 2026-10-06 22:25 UTC (price may vary). eBay sellers may still list this model new or used.
Bottom line: The Timetec 1TB SSD 3D NAND QLC SATA III 6Gb/s M.2 2280 NGFF Read Speed: 1TB capacity in a compact M.2 2280 form factor for laptops and desktops; main trade-off: QLC NAND endurance trails TLC under sustained heavy writes.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives with matching specs:
Same 1TB NVMe: Transcend MTS825 1TB M.2 2280 SATA III SSD — $193.99 on Amazon as of 2026-10-06 22:25 UTC (price may vary).
Same 1TB NVMe: Transcend MTS830 1TB M.2 2280 SATA III SSD with… — $219.99 on Amazon as of 2026-10-07 04:32 UTC (price may vary).
Same 1TB NVMe: TEAMGROUP MP33 1TB 2 Pack SLC Cache 3D NAND TLC… — $286.99 on Amazon as of 2026-10-06 16:16 UTC (price may vary).
Pros & Cons
Pros
- ✓ 1TB capacity in a compact M.2 2280 form factor for laptops and desktops
- ✓ Sequential reads up to 550MB/s, near the SATA III ceiling
- ✓ SLC cache technology pushes writes up to 500MB/s
- ✓ Rated 1,500,000-hour MTBF for long-term reliability
- ✓ Supports TRIM, S.M.A.R.T., wear-leveling, ECC and RAID
Cons
- ✗ QLC NAND endurance trails TLC under sustained heavy writes
- ✗ 550MB/s SATA speeds sit well below NVMe drives
- ✗ Write speed drops once the SLC cache fills
- ✗ No mounting screws or brackets included in the box
Manufacturer description
Timetec SSD
SpecPicks Verdict
SpecPicks scored Timetec 1TB SSD 3D NAND QLC SATA III 6Gb/s M.2 2280 NGFF Read Speed… using a rating × review-volume × price-fit model applied to published specs and reviews across the ssds & storage category. Timetec's ssds & storage lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for ssds & storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 3D NAND QLC Enhanced Read and Write Speeds: Sequential Read Speed up to 550MB/s and Write Speed up to 500MB/s, the advanced SLC Cache Technology allows performance boost and longer lifespan.
- An industry-leading 1,500,000 hours mean time before failure (MTBF)
- Compatible with Operating Systems Windows 11 / Windows 10 / Windows 8.1 / Windows 8 / Windows 7, Linux 2.6.33 or later; Compatible with desktops and laptops that accept M.2 2280 SATA III 6Gb/s SSD, Backwards Compatible with SATA II 3Gb/s and SATA I 1.5Gb/s.
- Support S.M.A.R.T. technology, TRIM command functions, Garbage Collection technology, Wear-Leveling technology, RAID, ECC (Error Correction Code), New Generation Power Saving technology.
- Included Contents: M.2 2280 SATA III 6Gb/s SSD (All Other Cables, Screws, Brackets Not Included); Three years limited warranty with free technical support service.
Full Specifications
| Brand | Timetec |
|---|---|
| Model Name | JM600 |
| Read Speed | 510 Megabytes Per Second |
| Form Factor | M 2 |
| Media Speed | 480 megabits_per_second |
| Model Number | JM600-256GB |
| Compatibility | PC, Linux |
| Built-In Media | M.2 SSD |
| Hard Disk Size | 1 TB |
| Hard-Drive Size | 1 TB |
| Number of Items | 1 |
| Special Feature | Backward Compatible |
| Hardware Platform | PC, laptop |
| Included Contents | M.2 2280 SATA III 6Gb/s SSD (All Other Cables, Screws, Brackets Not Included); Three years limited warranty with free technical support service. |
| Installation Type | Internal Hard Drive |
| Compatible Devices | Desktop, Laptop |
| Data Transfer Rate | 550 Megabytes Per Second |
| Enclosure Material | SATA |
| Additional Features | Backward Compatible |
| Hard Disk Interface | Solid State |
Ready to buy?
Amazon shows no buyable offer for Timetec 1TB SSD 3D NAND QLC SATA III 6Gb/s M.2… at the last check. The closest in-stock match with the same 1TB NVMe is Transcend MTS825 1TB M.2 2280 SATA III SSD. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related SSDs & Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Best Cooler for the Ryzen 7 5800X: Noctua vs DeepCool vs CoolerMaster
- Build a Low-Power Pi Home Server with NVMe in 2026
- Best SSD for Steam Deck and Handheld Emulation in 2026
- Linux Gaming Is Getting Faster: Windows APIs Hit the Kernel
- AI-Driven Driver Hunt: Installing Vintage Sound Cards on Windows 98 With Claude
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
- FIDECO vs Unitek vs Vantec: Best IDE/SATA-to-USB Adapter for Retro PCs
- Logitech G29 / G920 Not Detected on Windows 11: Step-by-Step Driver Fix Guide (2026)
- Local Video-Gen on 12GB: What an RTX 3060 Does in the Gemini Omni Flash Era
- Build a Budget Local-LLM Workstation Under $1,500: Ryzen 7 5800X + RTX 3060 12GB Benchmarks
- Running a 3dfx Voodoo5 5500 PCI in a Modern Board in 2026
- Best Budget Streaming Starter Kit for 2026 (Under $200)
- 32B Models on 12GB VRAM: What an RTX 3060 Can Really Run in 2026
- Inkling 975B: Thinking Machines' Open-Weight Speech Model, Explained
- Jellyfin on a Ryzen 5 5600G: 4K Transcoding on a $400 Mini-Server (2026)
- CRT vs LCD for Retro Gaming: Which Wins in 2026?
- Best 4K Monitor for PS5 and Xbox Series X Console Gaming in 2026
- GPT-5.6 Deleted User Files With Full Disk Access, OpenAI Says It Shouldn't Have
- Microsoft's SkillOpt Boosts Models With Just a Markdown File — What It Means for Your Local RTX 3060 Rig
- Best Gaming Monitor for 1440p Under $400 (2026)
- Best Webcam for Streaming Under $200 (2026)
- Ryzen AI Max+ 395 (Strix Halo) Mini PC vs RTX 3060 12GB for Local LLMs
- Does Ryzen 3D V-Cache Speed Up CPU-Only LLM Inference?
- Best Budget SSD for Gaming and PC Upgrades in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090