gofanco USB 3.0 HDMI Video Capture Device (CaptureHD4K)
Bottom line: The gofanco USB 3.0 HDMI Video Capture Device is a specs-and-price decision rather than a crowd-consensus one in the streaming gear category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ CAPTURED FORMATS – YUY2, RGB32, NV12. Supports Progressive and Interlaced resolutions
- ✓ Backed by gofanco's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored gofanco USB 3.0 HDMI Video Capture Device using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. gofanco's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- CAPTURE & STREAM HDMI – signals via USB 3.0 at up to 4K @30Hz or 1080p @120Hz with low latency. Supports 2ch PCM audio. Great for gaming, meetings or livestreaming to Youtube, Twitch and more. *Note: HDCP-encrypted content, such as movies, can’t be recorded/captured
- SOFTWARE COMPATIBILITY – software is NOT included; however, our device works with third-party software compatible with UVC & UAC protocols, such as OBS, Potplayer, VLC, Skype, Zoom, Adobe Flash Media Live Encoder, Vmix, Xsplit, Wirecast, and live streaming platform software, etc.
- OS SUPPORT – Driver free installation. Works with Windows 7 or later and macOS 10.9 or later
- CAPTURED FORMATS – YUY2, RGB32, NV12. Supports Progressive and Interlaced resolutions
- SIMPLE INSTALLATION – No driver required. FCC, CE and RoHS compliant. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley.
Full Specifications
| Brand | gofanco |
|---|---|
| Platform | Xbox |
| AV Output | HDMI |
| Model Name | CaptureHD4K |
| Unit Count | 1 Count |
| Connectivity | USB |
| Model Number | CaptureHD4K |
| Compatibility | Xbox, Mac |
| Built-In Media | Installation Guide |
| Item Dimensions | 3 x 1 x 3 inches |
| Mfr Part Number | CaptureHD4K |
| Number of Items | 1 |
| Antenna Location | Video Recording |
| Compatible Devices | Gaming Console, Personal Computer |
| Hardware Interface | USB 3.0 |
| Warranty Description | 1-year limited warranty |
| Video Capture Resolution | 1080p |
| Minimum System Requirements | A modern computer with Windows 7 or later, or Mac OS, and minimal processing power and RAM |
| Recommended Uses For Product | Video Recording |
| Other Special Features of the Product | Low Latency Video Capture and Streaming |
| Full listing title | gofanco USB 3.0 HDMI Video Capture Device (CaptureHD4K) | up to 4K30Hz and 1080p 120Hz, Low Latency for Xbox, Nintendo Game Consoles |
Ready to buy?
gofanco USB 3.0 HDMI Video Capture Device (CaptureHD4K) | up to 4K30Hz and 1080p 120Hz, Low Latency for Xbox, Nintendo Game Consoles is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- AI-Driven Win98 Voodoo Driver Install: A Repeatable Vision-LLM Playbook for the Sound Blaster Audigy FX
- Why a Red Hat Engineer Ditched ARM64 for AMD Ryzen (Linux AI Builds)
- Best CPU Cooler for AM4 Ryzen Overclocking (2026 Edition)
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
- Best AMD Ryzen CPU for Gaming in 2026: 5 Picks Compared
- Best Internal SSDs Under $100 in 2026
- Inkling's 975B Open-Weight Speech Model — and the 12GB Rig That Transcribes Free
- Best Apartment Sim Racing Wheel Setup: Quiet and Clamp-On (2026)
- BENGOO G9000 vs Turtle Beach Recon 50: Best Sub-$40 Wired Headset
- Best GPU for 1440p Ultrawide Gaming in 2026: Performance Tier Breakdown
- Best RGB Lighting for a Gaming PC Desk: LED Strips and Case Fans Done Right
- NVIDIA's AI Servers Run on Hot Tub Coolant — No Evaporators Neede
- Open-Source NVK Adds DLSS: What RTX 3060 Owners Get
- How to run Qwen 3 14B on Apple M3 Ultra
- Best Streaming and Podcasting Gear for 2026: 5 Picks for Mic, Light, and Monitoring
- Sound Blaster Audigy FX vs Sound Blaster Live! for Period-Correct Win98 Builds
- Best Budget PC Gaming Upgrades Under $200 in 2026
- Best Budget SSDs for Retro and Homelab Builds in 2026
- ExLlamaV2 vs llama.cpp for Single-User Chat on an RTX 3060 12GB in 2026
- AI-Driven Driver Install for Win98: Vision-LLM + 3060 12GB Build (2026)
- 3dfx Voodoo3 3000 PCI vs Voodoo5 5500 AGP: Win98 Performance Synthesis (2026)
- AI-Driven Driver Install on Win98 + WinXP: Vision-LLM Walks the Installer (Field Report)
- xAI Open-Sources Grok-Build: Running Agentic Coding on Your Own GPU
- Intel Arc Pro B70 Linux Gaming Performance 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090