Mcbazel
Mcbazel Joycon Joystick Replacement for Nintendo Switch
Bottom line: The Mcbazel Joycon Joystick Replacement for Nintendo Switch ($7.19 on Amazon as of 2026-10-06): Fits Switch, Switch OLED, and Switch Lite Joy-Cons, left or right; main trade-off: not compatible with Nintendo Switch 2 controllers.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Fits Switch, Switch OLED, and Switch Lite Joy-Cons, left or right
- ✓ Bundles both plus and Y-type screwdrivers, pry tool, and tweezers
- ✓ Each module is bench-tested before shipping
Cons
- ✗ Not compatible with Nintendo Switch 2 controllers
- ✗ Ships with no manual, printed instructions, or video guide
- ✗ Mcbazel states professional installation skill is needed
- ✗ Calibration in Switch settings is required after every install
Manufacturer description
The Mcbazel Joycon Joystick Replacement is a 3D analog thumb stick module for repairing drift on Nintendo Switch, Switch OLED, and Switch Lite controllers. It fits either the left or right Joy-Con, so you can order one part regardless of which stick started wandering. Note that it is not compatible with the Nintendo Switch 2. The kit arrives with the tools a teardown actually needs: two screwdrivers covering the plus and Y-type screws Nintendo uses, a pry tool for separating the shell, and tweezers for seating the ribbon cable. This is a bare replacement part, not a guided repair kit. No…
SpecPicks Verdict
SpecPicks scored Mcbazel Joycon Joystick Replacement for Nintendo Switch using a rating × review-volume × price-fit model applied to published specs and reviews across the joysticks & game port category. Mcbazel's joysticks & game port lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for joysticks & game port of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this joystick work with the Nintendo Switch 2?
No. Mcbazel lists this module as compatible with the original Nintendo Switch, Switch OLED, and Switch Lite only, and explicitly not compatible with Switch 2.
Will this fix Joy-Con drift?
It is sold as a drift repair part that replaces the worn or damaged analog stick. Mcbazel notes you must calibrate the joystick in Switch settings after installation, and recalibrate if drift or sudden movement persists.
Does it fit the left or the right Joy-Con?
Both. The listing states the module works for either the left or right Joy-Con controller, so you do not need to specify a side when ordering.
What tools come in the box?
Two screwdrivers covering the plus and Y-type screws, one pry tool, and one tweezer. Instructions are not included, so plan on a separate teardown guide.
How hard is the installation?
Mcbazel states professional installation skill is needed and provides no manual or video. The company does not cover damage caused by incorrect installation, so inexperienced users should follow a trusted third-party teardown video.
Key Features
- Compatibility: High quality replacement analog joystick for Nintendo Switch/Switch OLED Joycon controllers and Switch Lite joystick. Works for Left or Right joy con controller. NOT compatible with Nintendo Switch 2.
- Feature: Replaces you worn-out or damaged analog joystick. Fix the joystick drift issues and bring your controller back to life.
- Extra Accessories 2*Screwdriver, 1*Pry Tool, 1*Tweezer, the accessories make your work more convenient.
- Please Note: please calibrate the joystick using Switch setting after install.If you experience any drift or sudden movement issues with your replacement joystick, please try recalibrating the controller.
- Attention: Please confirm this item is the right model you need before placing order. Most repair parts is only suitable for special model. This item comes with No Manual , No Instruction Guide, No Video Guide. Professional installation skill is needed. To guarantee all replacement parts is in good condition, we had tested it before shipping. We do not hold any responsibility for damaging of this item cause by your wrong installation or your wrong purchasing.
Full Specifications
| Brand | Mcbazel |
|---|---|
| Color | Black |
| Feature | Replaces you worn-out or damaged analog joystick. Fix the joystick drift issues and bring your controller back to life. |
| Compatibility | Switch |
| Item Type Name | Switch replacement joystick |
| Item Dimensions | 5.51 x 3.94 x 0.59 inches |
| Hardware Platform | Nintendo Switch |
| Compatible Devices | Nintendo Switch |
| Included Components | 3D Replacement Joystick |
| Warranty Description | 1 Year |
| Manufacturer Part Number | BN-000069 |
| Full listing title | Mcbazel Joycon Joystick Replacement for Nintendo Switch, Switch OLED, Switch Lite(NOT for Switch 2) - 3D Replacement Joystick Analog Thumb Stick with +&Y-Screwdriver, Pry Tool, Tweezer Kit |
Ready to buy?
Mcbazel Joycon Joystick Replacement for Nintendo Switch, Switch OLED, Switch Lite(NOT for Switch 2) - 3D Replacement Joystick Analog Thumb Stick with +&Y-Screwdriver, Pry Tool, Tweezer Kit is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best GPU for Local Stable Diffusion Under $400: Why the RTX 3060 12GB Still Wins
- Local AI on Raspberry Pi 5: Sourced Benchmarks for Llama, Phi, and Gemma (2026)
- How to run Llama 3.1 8B on Apple M4 Pro (2026)
- Old RAM Identification: Decode Part Numbers & Specs
- RetroPie Handheld Shells in 2026: Pick the Right Pi for Your DIY Handheld
- After the Claude Code Malware Scare: Build an Isolated Local Agent Rig
- Why FurMark Has a 'GPU Killer' Reputation
- How to Image a Vintage IDE Hard Drive in 2026 With a USB Adapter
- Best Motherboard for Ryzen 7 9800X3D in 2026
- AMD Ryzen AI Halo Review Roundup: AMD Builds Its Own DGX Spark Rival
- Adafruit's 2026 I2S Microphone Guide Brings Real-Time Audio to CircuitPython
- GPT-5.6 Rollout Now Requires US Government Sign-Off, Customer by Customer
- Running GLM-5.2 Locally on an RTX 3060: Ollama VRAM + tok/s
- CompactFlash vs SATA-to-IDE: The Best Silent Boot Drive for a Win98 PC
- Best GPU for Qwen 3 32B (2026)
- Claude Opus 4.8 Tops the Intelligence Index — How Close Can a $300 RTX 3060 Get Locally?
- DeepSeek V4 Pro at $0.04 a Task: When Local Still Beats the Cloud
- Adafruit Reverse-Engineers the Creative Katana V2X Soundbar
- How nVidia Killed 3dfx — and Why Voodoo Still Haunts Every GPU Launch
- Modern PC Builds vs Period-Correct Retro Rigs: A 2026 Comparison
- NVMe vs SATA for Game Load Times: WD Blue SN550 vs Crucial BX500 in 2026
- Boot Windows 98 from CompactFlash: A Silent, Reliable CF-to-IDE Build
- Ollama vs LM Studio vs vLLM: Choosing a Local LLM Runner
- Best Budget Gaming CPU Under $250 in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090