Skip to main content
Large Microphone Clip for Mics with Outer Diameter 1.26" to 2.3" | Adjustable Mic Holder, Premium ABS, Inside sponge to protect microphones, With 5/8" Male to 3/8" Female Screw Adapter
BILIONE

BILIONE Large Microphone Clip for Mics with Outer Diameter 1.26" to 2.3"

Bottom line: The Large Microphone Clip for Mics with Outer Diameter 1.26" to 2.3" ($7.99 on Amazon as of 2026-10-06): Fits large barrels 1.26" to 2.3" (32-60mm), where stock clips fail; main trade-off: not compatible with SM57/SM58-class or mini microphones.

$7.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $7.99 Compare to similar streaming gear

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Fits large barrels 1.26" to 2.3" (32-60mm), where stock clips fail
  • ✓ Four springs spread clamp force evenly instead of pinching one side
  • ✓ Tension knob locks tilt so the mic won't droop mid-session
  • ✓ Sponge-lined interior prevents scratches on condenser mic finishes
  • ✓ Includes 5/8" male to 3/8" female adapter for Yeti and Snowball stands

Cons

  • ✗ Not compatible with SM57/SM58-class or mini microphones
  • ✗ Anything under 32mm diameter slips; you must measure before buying
  • ✗ Hard ABS body rather than metal, a tradeoff at this price point
  • ✗ Adapter only converts 5/8" to 3/8", not the reverse direction

Manufacturer description

The BILIONE Large Microphone Clip solves a problem most stock mounts ignore: it grips large-barrel mics with an outer diameter between 1.26" and 2.3" (32mm to 60mm), the range that covers the Audio-Technica AT2020, AT2020USB+, AT2035, HyperX QuadCast, FIFINE K669B, and Razer Seiren X. A hard ABS body carries four springs that distribute clamping force evenly across the barrel instead of pinching one side, and a tension knob lets you lock the tilt angle so the mic stops drooping halfway through a stream or a take. The inside of the O-clip is lined with sponge, so the finish on a condenser…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Large Microphone Clip for Mics with Outer Diameter 1.26" to 2.3" using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. BILIONE's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this clip fit my HyperX QuadCast or AT2020?

Yes. Both fall inside the 1.26" to 2.3" (32-60mm) outer diameter range, and the listing names the AT2020, AT2020USB+, AT2035, QuadCast, FIFINE K669B, and Razer Seiren X as confirmed fits.

Does it work with a Shure SM58?

No. The manufacturer states the clip is not suitable for SM57/SM58-class handhelds or mini mics; those barrels sit below the 32mm minimum and will not be gripped securely.

Will the clip scratch my microphone?

The inside of the O-clip is lined with sponge specifically to prevent scratching, so the ABS shell never contacts the mic body directly when you seat or remove it.

Can I use this with a Blue Yeti on my existing stand?

Yes. A 5/8" male to 3/8" female screw adapter is included in the package, which is the conversion needed to mount a Blue Yeti or Blue Snowball onto standard mic stands.

Does the mic stay put, or does it sag during long sessions?

A dedicated knob adjusts tilt tension, so you can tighten the joint to hold your angle through a full recording or broadcast. Hold strength is a frequently cited point.

Key Features

  • Very Important!!! Please check the size of your microphones before purchasing. the microphone clip fits for most larger condenser and handheld cordless microphones with Outer Diameter Range 1.26" from 2.3". Not suitable for SM57-58 even mini mics
  • Big Mic Clip: The microphone clip is made of hard ABS, which utilizes 4 springs for even strength, greatly enhancing durability. There is a knob for easy adjustment of the tilt tension - that way you don't have to worry about the mic drooping in the middle of a session
  • Good microphone accessory: The inside of the O-Clip is lined with a sponge to prevent it from scratching the microphone. In addition, this microphone clip is easy to tighten and remove. Perfect for shows, recordings, live broadcasts, and other outdoor music events
  • Wide range of compatibility: It's big enough for Most Condenser and Wireless Microphones with a diameter greater than 32mm and less than 60mm, such as AT2020, AT2020USB+, AT2035, QuadCast,K669B, Seiren X.etc
  • Package includes a 3/8” to 5/8” screw adapter, which will do the right thing If you want to connect the your Blue Yeti or Blue Snowball on mic stands

Full Specifications

BrandBILIONE
Colorblack
StyleModern
Base TypeClamp
ConnectivityWireless
Model NumberMC01B
Product StyleModern
Connection TypeWireless
Item Dimensions2.76 x 2.17 x 4.53 inches
Body Material TypeABS
Included Components3/8" to 5/8" screw adapter
Warranty Description60 days free return.
Manufacturer Part NumberMC1
Item dimensions L x W x H2.76 x 2.17 x 4.53 inches
Microphone Stand Thread Size3/8 inch, 5/8 Inch
Full listing titleLarge Microphone Clip for Mics with Outer Diameter 1.26" to 2.3" | Adjustable Mic Holder, Premium ABS, Inside sponge to protect microphones, With 5/8" Male to 3/8" Female Screw Adapter

Ready to buy?

Large Microphone Clip for Mics with Outer Diameter 1.26" to 2.3" | Adjustable Mic Holder, Premium ABS, Inside sponge to protect microphones, With 5/8" Male to 3/8" Female Screw Adapter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $7.99

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Related Streaming Gear

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Large Microphone Clip for Mics with Outer Diameter 1.26" to 2.3" | Adjustable Mic Holder, Premium ABS, Inside sponge to protect microphones, With 5/8" Male to 3/8" Female Screw Adapter
$7.99
View on Amazon →