Skip to main content
Universal Monitor VESA Mount Adapter for Non-VESA 13 - 27 inch Computer Monitors Tablets iPad VESA Mounting Arm Stand Bracket Kit 75X75mm…
Cozycomfo

Cozycomfo Universal Monitor VESA Mount Adapter for Non-VESA 13

Bottom line: The Cozycomfo Universal Monitor VESA Mount Adapter for Non-VESA 13 ($6.69 on Amazon as of 2026-11-22 17:20 UTC): Adds a 75x75mm VESA pattern to monitors that shipped without one; main trade-off: only a 75x75mm hole pattern; no 100x100mm option is listed.

$6.69 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Adds a 75x75mm VESA pattern to monitors that shipped without one
  • ✓ Rated for up to 24 lbs, enough for most 13-27 inch flat panels
  • ✓ Adhesive mount, so no drilling into the monitor housing
  • ✓ Works with VESA arms, desk stands and dual-monitor wall mounts
  • ✓ Low-profile plate replaces clunky clamp-style brackets

Cons

  • ✗ Only a 75x75mm hole pattern; no 100x100mm option is listed
  • ✗ Needs a flat 6.6 x 5.8 inch area, so curved or ridged backs won't work
  • ✗ Adhesive must cure for 24 hours before you attach an arm
  • ✗ No removal method or residue-free removal claim is stated

Manufacturer description

The Cozycomfo Universal Monitor VESA Mount Adapter lets you put a non-VESA screen on a monitor arm. If your 13-27 inch monitor has no mounting holes on the back, this adhesive plate gives it a standard 75x75mm VESA pattern. You can then use it with a monitor arm, a desk stand or a dual-monitor wall mount without visible clamps or brackets. The plate needs a flat area of 6.6 x 5.8 inches on the back of the display. Peel off the protective film, press the adapter onto a clean, flat surface and let the adhesive cure for a full 24 hours. After that, bolt your VESA arm or stand to the 75x75mm…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Cozycomfo Universal Monitor VESA Mount Adapter for Non-VESA 13, so this read rests on the manufacturer's listed specs and the current price in the accessories category (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "Adds a 75x75mm VESA pattern to monitors that shipped without one"; the main trade-off is "Only a 75x75mm hole pattern; no 100x100mm option is listed". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this adapter fit my monitor?

It's made for 13-27 inch monitors with a flat area of at least 6.6 x 5.8 inches on the back. Measure your monitor's rear panel before you buy. Curved, sloped or ribbed backs won't give the adhesive full contact.

How much weight can the Cozycomfo VESA adapter hold?

Cozycomfo lists a maximum load of 24 pounds. Check your monitor's weight without its stand and make sure your arm or wall mount is also rated for that load.

How long do I need to wait before mounting my monitor?

Wait 24 hours. Peel off the protective film, stick the adapter to a clean, flat spot on the back of the monitor and let it cure for a full day before attaching the VESA arm or stand.

Which VESA hole pattern does it use?

The adapter installs through 75x75mm VESA holes. Before you buy, confirm that your monitor arm, stand or wall mount accepts a 75x75mm plate.

Can I remove the adapter later without damaging my monitor?

The listing describes a strong, long-lasting adhesive but doesn't say how to remove it or whether it leaves residue. Check the product listing or contact Cozycomfo before using it on a display you may want to un-mount.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Non-VESA Monitor Mounting Solution: Use this adapter to convert an old Non-VESA flat screen monitor to a VESA standard monitor with 75X75mm mounting screws. No more clunky visible brackets.
  • Universal Adapter: Suitable for 13-27 inch monitors with a 6.6X5.8 inch flat surface area on the back. Fits all VESA plate holes, install through 75X75mm holes.
  • Easy Installation: Just peel off the protection film and stick this adapter to the back of your monitor, wait for 24 hours, then install on your VESA arm/stand.
  • Safe And Solid: Max bearing weight 24 pounds, strong adhesive, last long time. Very solid, once installed, will not fall off.
  • Important: Make sure there is a 6.6X5.8 inch flat area to install, and do wait for 24 hours before installing the VESA mounting arm/stand. Please make sure the place where you paste is flat.

Full Specifications

BrandCozycomfo
ColorTransparent
MaterialAluminum
Model NumberCozycomfo_UniqueIdentifier
Movement TypeArticulating
Safe And SolidMax bearing weight 24 pounds, strong adhesive, last long time. Very solid, once installed, will not fall off.
Mfr Part NumberAE-KKIP-V48L
Number of Items1
Easy InstallationJust peel off the protection film and stick this adapter to the back of your monitor, wait for 24 hours, then install on your VESA arm/stand.
Universal AdapterSuitable for 13-27 inch monitors with a 6.6X5.8 inch flat surface area on the back. Fits all VESA plate holes, install through 75X75mm holes.
Compatible DevicesMonitor
Enclosure MaterialAluminum
Maximum-Supported Screen Size27 inches
Minimum-Supported Screen Size13 inches
Full listing titleUniversal Monitor VESA Mount Adapter for Non-VESA 13 - 27 inch Computer Monitors Tablets iPad VESA Mounting Arm Stand Bracket Kit 75X75mm…

Ready to buy?

Universal Monitor VESA Mount Adapter for Non-VESA 13 - 27 inch Computer Monitors Tablets iPad VESA Mounting Arm Stand Bracket Kit 75X75mm… is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $6.69

*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →