MOOKEERF BNC Male to BNC Female Coaxial Cable 50 ohm RG8X Coax Ultra Low Loss for Antenna
Bottom line: The MOOKEERF BNC Male to BNC Female Coaxial Cable 50 ohm RG8X Coax Ultra: 50 ohm RG8X rated for RF work, not repurposed 75 ohm video coax; main trade-off: 50 ohm impedance mismatches 75 ohm CCTV and video BNC gear.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 50 ohm RG8X rated for RF work, not repurposed 75 ohm video coax
- ✓ Rated -2.65dB loss at 25ft/1800MHz with VSWR held at 1.15 or lower
- ✓ Pure copper center conductor with 95% tinned copper braid shielding
- ✓ BNC male to female runs as an extension without adding a gender adapter
Cons
- ✗ 50 ohm impedance mismatches 75 ohm CCTV and video BNC gear
- ✗ 10FT fixed length means slack to coil on short bench runs
- ✗ RG8X is thicker and stiffer than RG58, so tight equipment racks are awkward
- ✗ 2.2 inch adhesive tube at the connector adds bulk near crowded ports
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOOKEERF BNC Male to BNC Female Coaxial Cable 50 ohm RG8X Coax Ultra…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "50 ohm RG8X rated for RF work, not repurposed 75 ohm video coax"; the main trade-off is "50 ohm impedance mismatches 75 ohm CCTV and video BNC gear". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Specification]-Connector: BNC male to BNC female, impedance: 50 ohm, Cable type: RG8X.
- [Ultra Low Loss]-The RG8X jumper cable got a professional structure and take good advantage in transmit data with lower signal attenuation that low to -2.65db(25ft,1800MHz) and keep VSWR≤1.15.
- [Firm Connected]-We fix the connector with 2.2" adhesive tube and it will not easy to fall off from the cable. And that can provide a heavy duty and firmly connection, really durable and professional coaxial cable.
- [High Grade Material]-This RG8X BNC cable inner conductor is made by pure copper and build with 95% tinned copper braid, that can make sure the signal transmission efficiently and stable. The PVC jacket is waterproof and has strong oxidation resistance, and can be adapted to outdoor for a long time.
- [Widely Application]-Compatible with device which contain BNC connector, including splitter, 3G/4G/LTE antenna, Oscilloscope, Spectrum, Analyzer and Network systems etc.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Black |
| Model | RG8X-BNC-JK |
| Weight | 3g |
| Frequency | 2 GHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | RG8X-BNC-JK |
| Unit Count | 10 Feet |
| Part Number | RG8X-BNC-JK |
| Connector Type | BNC |
| Number of Pins | 1 |
| Outer Material | Polyvinyl Chloride (PVC) |
| Number of Items | 1 |
| Special Feature | gps |
| Connector Gender | Male-to-Female |
| Compatible Devices | Antenna |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Warranty Description | 30 Days From the Date of Purchased |
| Customer Package Type | sealed anti-static bag (probable) |
| Full listing title | MOOKEERF BNC Male to BNC Female Coaxial Cable 50 ohm RG8X Coax Ultra Low Loss for Antenna, RF Radio, Modem, Oscilloscope, Spectrum, Analyzer, Signal Generator (10FT) |
Ready to buy?
MOOKEERF BNC Male to BNC Female Coaxial Cable 50 ohm RG8X Coax Ultra Low Loss for Antenna, RF Radio, Modem, Oscilloscope, Spectrum, Analyzer, Signal Generator (10FT) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- GeForce 6800 Ultra AGP Install Guide: Drivers, Benchmarks, and the Last Great AGP Card
- Best Hardware for a Home Game Server in 2026
- Period-Correct Pentium III + GeForce 4 Ti Build for 2001-2003 Gaming
- Retro Game Emulator Online: Top Browser-Based Picks for 2026
- Microsoft's SkillOpt Boosts Models With Just a Markdown File — What It Means for Your Local RTX 3060 Rig
- RX 580 in 2026: Still Worth It for 1080p Gaming?
- Imaging Vintage IDE and SATA Drives in 2026: The Vantec CB-ISATAU2 Workflow
- Raspberry Pi 4 8GB in 2026: Still the Best Home-Lab SBC for Under $80
- NVIDIA Nemotron 3 Ultra: What It Takes to Run Locally
- Claude Mythos: What Anthropic Found + Why Regulators Were Briefed
- Linux vs Windows 11: AMD Ryzen 9 9950X3D Performance
- Best PC Game Controller for Every Genre in 2026
- Best Streaming Setup Under $400: G502 + QuadCast 2 S + Cam Link 4K vs the Bundle Alternatives
- Cloudflare CEO: The Web's Future Is 'Pay to Crawl' as Bots Overtake Humans
- Best Workstation PC Parts on Amazon in 2026
- PS5 DualSense vs 8BitDo Pro 2 on Raspberry Pi 4 RetroPie: Which Controller Wins in 2026?
- How to run Qwen 3 32B on NVIDIA GeForce RTX 4090
- Ryzen 7 5800X3D vs Core i7-14700K: The DDR4 Gaming Faceoff for 2026 Builders
- Best CPU Cooler for a Ryzen 5800X Under PBO + Manual Overclock in 2026
- KOORUI 27" 4K QD-Mini LED: Is a Budget 4K Gaming Monitor Enough for an RTX 3060?
- RTX 5090 vs RTX A6000 for Local LLMs: Speed (5090) or Capacity (A6000)?
- Jellyfin on Raspberry Pi 4 8GB with an SSD (2026 Guide)
- AI Bug-Hunting Surged: Running a Local Security-Scanner LLM on 12GB VRAM
- Copilot Cowork Goes Usage-Based: The Local-Rig Cost Case in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090