Creativity Ender 3 Fan Upgrade 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 / Ender 3 Pro 3D Printer
Bottom line: Per its Amazon listing, the Creativity Ender 3 Fan Upgrade 4010 Fans 40x40x10MM DC 24V Extruder: :DC 24V,The length of the wire is 1.2 meters, 4010 Fans 40x40x10MM; 0.042KG; :DC 24V Extruder Hot End Fan and DC 24V Turbo fan.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 【Size】:DC 24V,The length of the wire is 1.2 meters, 4010 Fans 40x40x10MM; 0.042KG.
- ✓ Backed by Creativity's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Creativity ender 3 fan upgrade 4010 fan 24v set. Strong wind force and low power consumption, excellent cooling system, multi fan blades with fluid design.Specifications:* Materials: Plastic* Operation Voltage: DC 24V* Type: 4010* Fits for Ender 3, Ender 3 Pro4010 Axial Cooling Fan:The fan is 24V and has 1.2m XH2.54 terminals. The fan speed is 7000 r/min.4010 Blower Cooling Fan:The fan is 24V and has 1.2m XH2.54 terminals .The fan speed is 6800 r/min.Packing List:4010 Axial Cooling Fan4010 Blower Cooling Fan
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Creativity Ender 3 Fan Upgrade 4010 Fans 40x40x10MM DC 24V Extruder…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【High-quality Materials】:Made of high quality plastics with high end bearings, Multi Fan Blades with Fluid Design,this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- 【Easy to Use】:Cable connector is already fitted and product is out-of-the-box ready for installation. Great replacement item for your all metal hotends.
- 【Fit for】:Creativity Ender 3, Ender 3 Pro. large air flow,low noise; long span life; good running stability and corrosion resistance.
- 【Size】:DC 24V,The length of the wire is 1.2 meters, 4010 Fans 40x40x10MM; 0.042KG.
- 【Package Including】:DC 24V Extruder Hot End Fan and DC 24V Turbo fan.
Full Specifications
| Brand | Creativity |
|---|---|
| Model | Sprinkler Fan Kit |
| Turbo | Yes |
| Weight | 0.042kg |
| Voltage | 24 volts |
| Wattage | 6.96 watts |
| Material | Metal, Plastic |
| Dimensions | 40x40x10mm |
| Unit Count | 2 Count |
| Part Number | Sprinkler Fan Kit |
| Material Type | Metal, Plastic |
| Cooling Method | Air |
| Number of Items | 1 |
| Compatible Devices | Desktop |
| Power Connector Type | 4-Pin |
| Maximum Rotational Speed | 7000 rpm |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
Benchmark data for other processors
Ready to buy?
Creativity Ender 3 Fan Upgrade 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 / Ender 3 Pro 3D Printer is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Training an LLM in Swift, Part 1: Matrix Mult Speed
- Steam Deck LCD Battery Swollen: Diagnosis & Safe Fix Guide
- Best Mechanical Keyboard for Office and Gaming Crossover (2026)
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best 27-Inch Gaming Monitor?
- Best Raspberry Pi Alternative for Klipper in 2026 (and When the Pi Still Wins)
- KOORUI 27" 4K QD-Mini LED: Is a Budget 4K Gaming Monitor Enough for an RTX 3060?
- Baidu Unlimited OCR Runs Locally: Document AI on an RTX 3060 12GB
- RTX 3060 12GB vs RTX 4060 Ti 16GB for Qwen2.5-Coder 14B (2026)
- Best Mechanical Keyboard for Office and Hybrid Work in 2026
- ASRock Arc B580 12GB vs RTX 3060 12GB for 1440p Gaming in 2026
- GPU Benchmark Data Freshness and Source Attribution in 2026
- KOORUI 27" 4K vs Samsung Odyssey 27" 4K for PS5 and PC Gaming
- OpenAI Codex Now Drives Windows Autonomously: What It Means for Local AI Rigs
- Ryzen 5 5600G vs Ryzen 7 5800X for a Budget 2026 Build
- MCL8080+ Squeezes an Intel 8080 Emulator into an ATtiny85
- GLM-5.2 Review: Running the Top Open-Weights LLM on an RTX 3060
- Open WebUI + Ollama on an RTX 3060: The Self-Hosted ChatGPT Alternative for 2026
- Self-Hosting Foundry VTT: Raspberry Pi 4 vs an Old i7-9700K Box
- Samsung 870 EVO vs Crucial BX500: Best SATA SSD 2026
- Ryzen 7 5800X vs Core i7-9700K for 1080p Esports in 2026
- Open-Source Layer Brings Reflex and Anti-Lag 2 to All GPUs
- How to run Qwen 3 32B on NVIDIA GeForce RTX 4090
- Qualcomm Enters the Data-Center Market With Its Own AI Processor
- Running Mistral Leanstral 1.5 Locally on an RTX 3060 12GB
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090