Skip to main content
GeeekPi 4pcs 40x40x10mm 4010 DC 5V Brushless CPU Cooling Fan for Raspberry Pi 4B/3B+/3B/2B (Black)
GeeekPi

GeeekPi 4pcs 40x40x10mm 4010 DC 5V Brushless CPU Cooling Fan for Raspberry Pi 4B/3B+/3B/2B (Black)

Bottom line: The GeeekPi 4pcs 40x40x10mm 4010 DC 5V Brushless CPU Cooling Fan: Four 40x40x10mm fans in one pack, enough for several Pi builds or spares; main trade-off: no RPM, airflow or noise rating given in the listing.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Four 40x40x10mm fans in one pack, enough for several Pi builds or spares
  • ✓ Brushless DC 5V motor powered straight from the Pi's GPIO header
  • ✓ Move the red lead to the 3V3 pin for slower, quieter running
  • ✓ Four screw sets included to fasten each fan to a case mount
  • ✓ Listed for Raspberry Pi 4B, 3B+, 3B, 2B and Model B+

Cons

  • ✗ No RPM, airflow or noise rating given in the listing
  • ✗ Two-wire fan with no PWM speed control or tachometer feedback
  • ✗ Raspberry Pi 5 is not on the listed compatibility
  • ✗ Needs a case or bracket with a 40mm fan mount to install cleanly

Manufacturer description

Keep your Raspberry Pi cool under sustained load with the GeeekPi 4010 brushless cooling fan 4-pack. Each fan measures 40x40x10mm and runs on DC 5V, and GeeekPi lists it for the Raspberry Pi 4B, 3B+, 3B, 2B and Model B+. That makes it a direct fit for the many Pi cases and enclosures with a 40mm fan mount. Setup takes a minute. Connect the red lead to a 5V GPIO pin and the black lead to GND, then fasten the fan with the included screws. You can control the speed without extra hardware: move the red wire to the 3V3 pin and the fan runs slower and quieter. That suits a media center or desk…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for GeeekPi 4pcs 40x40x10mm 4010 DC 5V Brushless CPU Cooling Fan, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Four 40x40x10mm fans in one pack, enough for several Pi builds or spares"; the main trade-off is "No RPM, airflow or noise rating given in the listing". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How do I connect the GeeekPi 4010 fan to my Raspberry Pi?

Connect the red wire to a 5V GPIO pin and the black wire to a GND pin. The fan starts as soon as the Pi is powered on.

Can I make the fan run quieter?

Yes. GeeekPi says you can move the red wire from the 5V pin to the 3V3 pin. The fan then runs at a lower speed and makes less noise, at the cost of some airflow.

Which Raspberry Pi models does this fan work with?

The listing names the Raspberry Pi 4B, 3B+, 3B, 2B and Model B+. Other models, including the Pi 5, are not listed, so check that your case has a 40mm mount before buying for a different board.

What size is the fan and what comes in the box?

Each fan measures 40x40x10mm and is black. The pack contains 4 cooling fans and 4 screw sets. The Raspberry Pi board is not included.

Is there a smaller pack available?

Yes. GeeekPi sells a 2-pack version under ASIN B07X6CXQLN if you only need fans for one or two boards.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+
  • The DC 5V cooling fan run smoothly and quietly and it's good for heat dissipation of Pi board. It can be assembled easily by screws.
  • Fan Size: 40x40x10mm, Color: Black
  • Package Includes: 4x Cooling Fan, 4x Screw Set. 2Pack Version,please refer to Asin:B07X6CXQLN
  • NOTE: Pi board Not Included

Full Specifications

NOTEPi board Not Included
BrandGeeekPi
Voltage5 volts
Fan Size40x40x10mm, Color: Black
MaterialPlastic
Dimensions40x40x10mm
Part Number4PCS4010FAN
Material TypePlastic
Cooling MethodAir
Number of Items8
Number of Packs4
Package Includes4x Cooling Fan, 4x Screw Set. 2Pack Version,please refer to Asin:B07X6CXQLN
Compatible DevicesSingle-Board Computers
Power Connector Type3-Pin
Item Dimensions L x W x H1.57"L x 0.39"W x 1.57"H

Benchmark data for other processors

Ready to buy?

GeeekPi 4pcs 40x40x10mm 4010 DC 5V Brushless CPU Cooling Fan for Raspberry Pi 4B/3B+/3B/2B (Black) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Retro CPU Coolers & Fans

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →