WINSINN
WINSINN 40mm Fan 12V
Bottom line: The WINSINN 40mm Fan 12V: Dual ball bearings rated for 50,000 hours of 24/7 running; main trade-off: 2-pin only: no PWM speed control or RPM tach signal.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Dual ball bearings rated for 50,000 hours of 24/7 running
- ✓ Moves 7.1 CFM at 6500 RPM from a 40x40x10mm frame
- ✓ Low 1.2W draw (0.1A at 12V) on small power rails
- ✓ 300mm XH2.54 cable reaches most mainboards from the hotend
- ✓ Two fans per pack, backed by a 5-year warranty
Cons
- ✗ 2-pin only: no PWM speed control or RPM tach signal
- ✗ Rated for 12V DC; 24V printer boards need a different fan
- ✗ 28.2 dBA whine can be heard in quiet desk setups
- ✗ Needs an adapter to plug into a 3-pin motherboard header
Manufacturer description
The WINSINN 40mm fan 12V 2-pack covers small cooling jobs where a larger fan won't fit. Each 4010 fan measures 40mm x 40mm x 10mm. It suits a 3D printer extruder, hotend or nozzle shroud, and also works for venting a small PC case, router, Raspberry Pi enclosure or TV box. Each brushless fan runs on 12V DC at 0.1A and 1.2W. It spins at 6500 RPM and moves 7.1 CFM at 3.92 mmH2O of static pressure, with a rated noise level of 28.2 dBA. Dual ball bearings are rated for 50,000 hours, so the fan can run 24 hours a day in an always-on printer or home server. WINSINN backs the fans with a 5-year…
SpecPicks Verdict
SpecPicks scored WINSINN 40mm Fan 12V using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. WINSINN's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this fan work on a 24V 3D printer?
Not directly. The fan is rated for 12V DC at 0.1A. On a 24V mainboard you need a 24V fan or a step-down converter that supplies 12V. Check your printer's fan output voltage before you install it.
What connector does the WINSINN 40mm fan use?
Each fan has a 2-pin XH2.54 connector on a 300mm (11.8in) cable. Many 3D printer boards use this style of plug. A standard 3-pin PC motherboard fan header uses a different housing, so you may need an adapter.
Can I control the fan speed with PWM?
No. It is a 2-wire fan with no PWM or tach wire. You can only change the speed by changing the supply voltage. At the full 12V rating it spins at 6500 RPM and moves 7.1 CFM.
How loud is this 4010 fan?
WINSINN rates it at 28.2 dBA at full 12V speed. That is quiet enough for a printer enclosure or network closet, but you may hear it in a silent desktop build.
What warranty and lifespan does the fan have?
WINSINN lists a 5-year warranty and a 50,000-hour rated life from the dual ball bearings, which suits long 24/7 runs. Check the product listing for the current warranty claim process.
Key Features
- ✔️WINSINN 40mm fan 12V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 12V, Current: 0.1A, Power: 1.2W, Speed: 6500PRM, Air Pressure: 3.92mmH₂O, Airflow: 7.1CFM, Noise: 28.2dBA
- ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation.
- ✔️Packing List: 2 x 40mm Fan 12v - Dual Ball Bearing, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm
Full Specifications
| Brand | WINSINN |
|---|---|
| Model | 2PFAN401012D |
| Voltage | 12 Volts |
| Wattage | 1.2 watts |
| Material | Plastic |
| Unit Count | 2.0 Count |
| Noise Level | 28.2 Decibels |
| Part Number | DB401012F2P |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 2 |
| Air Flow Capacity | 7.1 Cubic Feet Per Minute |
| ✔️Widely Used | Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation. |
| Compatible Devices | Printer |
| ✔️Packing List | 2 x 40mm Fan 12v - Dual Ball Bearing, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm |
| ✔️Rated Voltage | DC 12V, Current: 0.1A, Power: 1.2W, Speed: 6500PRM, Air Pressure: 3.92mmH₂O, Airflow: 7.1CFM, Noise: 28.2dBA |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 6500 RPM |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
| Full listing title | WINSINN 40mm Fan 12V, 3D Printer Micro 12 Volt Fans 4010 Dual Ball Bearing, Brushless Cooling 40mmx10mm 2PIN (Pack of 2Pcs) |
Ready to buy?
WINSINN 40mm Fan 12V, 3D Printer Micro 12 Volt Fans 4010 Dual Ball Bearing, Brushless Cooling 40mmx10mm 2PIN (Pack of 2Pcs) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
![[2 Pack] ELUTENG 40mm Fan Filter Dustproof Cover USB Cooling Ventilator Plastic Grill 40 * 40mm USB Fan Blower Mesh Kit Compatible for DIY 4cm Computer Case Fan Dirt Filtering](https://m.media-amazon.com/images/I/71PisWd20QL._SL1500_.jpg)
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Prime Day 2026: Gaming Monitor and Logitech Peripheral Deals to Watch
- Is the Ryzen 7 7800X3D Worth It in 2026?
- Microsoft Mirage and Persistent-Memory Video Gen: How Much VRAM You Actually Need
- SANSUI vs KOORUI 27" 4K: Which Budget 4K Gaming Monitor Wins?
- Tencent Hy3 on an RTX 3060 12GB: Can a $300 GPU Run It?
- Arc A770 16GB vs RTX 3060 12GB for Local Llama 3
- GPT-5.6 Sol Reportedly Cracks a 30-Year Statistics Conjecture in 90 Minutes
- ComfyUI on an RTX 3060 12GB: Stable Diffusion & Flux Throughput in 2026
- Best SteamOS Handheld Gaming PCs in 2025: What to Buy
- RTX 5080 vs RTX 4080 for LLM Inference: Same 16GB, Different Answer (2026)
- Logitech G29 vs HORI Racing Wheel Overdrive for Entry Sim Racing
- GTX 1050 Ti 4GB vs Raspberry Pi 4 8GB for Qwen3 1.7B Local Inference
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming
- Period-Correct LAN Party Build: 2002 Pentium 4 + GeForce 4 Ti + Sound Blaster Live
- Ryzen 7 5800X vs Ryzen 5 5600G for 1080p Gaming: Which Wins?
- Mystery N64 Cartridge Found in the Woods Boots Up
- Logitech G29 vs HORI Racing Wheel Overdrive: Which Entry Sim Wheel Wins?
- Sound BlasterX G6 on a Retro Windows XP Rig: USB Audio for Period-Correct Builds
- ASRock Phantom Gaming vs Steel Legend 360 LCD Review
- Enthusiast Hides Gaming PC Inside Living Room Fan
- Can You Run Kimi K3 Locally? VRAM Math for the New Open Model
- Prime Big Deal Days 2026: Best Mini PC Deals for Local AI and Home Labs
- Best GPU for DeepSeek-R1 32B (2026)
- Mistral Medium 3.5 Local Inference: VRAM, Quantization & Tokens/sec on Consumer GPUs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090