XRDS -RF
XRDS -RF BNC Cables 25FT
Bottom line: The XRDS -RF BNC Cables 25FT ($21.99 on Amazon as of 2026-10-20 22:22 UTC): Solid copper center conductor for low-loss RF transmission; main trade-off: thin RG316 loses more signal than RG8/LMR400 on long UHF runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Solid copper center conductor for low-loss RF transmission
- ✓ 50 ohm impedance matched for ham radios, scanners and antennas
- ✓ Low-loss RG316 coax stays flexible and lightweight to route
- ✓ Moisture, corrosion and high-temp resistant for indoor or outdoor runs
Cons
- ✗ Thin RG316 loses more signal than RG8/LMR400 on long UHF runs
- ✗ Sold only in a single 25ft length, no shorter or longer options
- ✗ BNC male on both ends; needs an adapter for SMA or N-type gear
- ✗ 50 ohm spec is wrong for 75 ohm CCTV or composite video use
SpecPicks Verdict
SpecPicks scored XRDS -RF BNC Cables 25FT using a rating × review-volume × price-fit model applied to published specs and reviews across the display & crt accessories category. XRDS -RF's display & crt accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for display & crt accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Connector Type: BNC Male to BNC Male ; Cable Type: Low Loss RG316 Coaxial Cable ;Length: 25ft; Impedance: 50 ohm
- Features: The inner conductor of this bnc coax is made of solid copper that high frequency and low transmission loss, low voltage standing wave ratio, durable use indoors and outdoors.
- The 50 ohm coax cable bnc RG316 coaxial cable has good anti-electromagnetic interference and softness, light weight, high temperature resistance, moisture resistance, corrosion resistance, etc.
- Application: the bnc coaxial cable is widely used for RF applications or flexible networks, ham radio, bnc attenuator, Portable Shortwave Radio, broadcast, video transmission and surveillance.
- Package:25FT bnc male to bnc male cable, any problem please contact our customer support.
Full Specifications
| Brand | XRDS -RF |
|---|---|
| Model | RG316 |
| Package | 25FT bnc male to bnc male cable, any problem please contact our customer support. |
| Cable Type | Coaxial |
| Item Shape | Round |
| Unit Count | 1 Count |
| Item Length | 25 feet |
| Part Number | RG316 |
| Connector Type | BNC |
| Number of Pins | 2 |
| Number of Items | 1 |
| Special Feature | Portable |
| Connector Gender | Male-to-Male |
| Compatible Devices | Scanner |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Compatible Phone Models | No Compatible Phone Models |
| Recommended Uses For Product | RF applications, ham radio, broadcast, video transmission, surveillance |
| Other Special Features of the Product | Portable |
| Full listing title | XRDS -RF BNC Cables 25FT, 50 Ohm BNC Male Cable RG316 Antenna Cable for Antenna Scanners Handheld Ham Radios etc. |
Ready to buy?
XRDS -RF BNC Cables 25FT, 50 Ohm BNC Male Cable RG316 Antenna Cable for Antenna Scanners Handheld Ham Radios etc. is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Related Display & CRT Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Streaming Setup Under $400: G502 + QuadCast 2 S + Cam Link 4K vs the Bundle Alternatives
- Open WebUI — self-hosted ChatGPT for your local models
- AI-Driven Driver Hunting on WinXP: Using Vision LLMs to Install Audigy 2 ZS Without Internet
- Voodoo5 5500 PCI in a Modern Board: Install, Glide & Win98 Setup
- ProgramBench: Can LLMs Rebuild Programs From Scratch?
- Handheld Gaming PC Comparison: 2024's Top Picks
- 180Hz 1440p Gaming Monitors Hit Entry-Level Pricing
- Qwen3.6-27B vs Coder-Next: Local Code Accuracy and VRAM on AMD Rigs
- Grok 4.3 vs GPT-5 vs Claude 4.7: Local Hardware Implications of the Closed-Model Intelligence Index
- How Running Out of VRAM Affects Your FPS
- Qwen 3.6 35B GGUF: NTP vs MTP Quantization Explained
- Raspberry Pi 4 8GB vs Ryzen 5 5600X: Gemma 3 1B Always-On
- Ryzen 7 5800X3D vs 5800X for 1080p Competitive Gaming: Which Wins?
- Best USB Microphones for Streaming and Podcasting (2026)
- Qwen 3.6 27B Matches Sonnet 4.6 on Artificial Analysis Agency
- Ryzen 7 5800X vs 5700X for 1080p High-Refresh Gaming
- Jetson Orin Nano Super vs Raspberry Pi 5: Real Edge-AI Benchmarks (2026)
- AMD Ryzen 7 7700X3D Lands as a Newegg Exclusive at $329
- Period-Correct Sound for a Modern Retro PC: The Sound Blaster G6 and the EAX Legacy
- Retro Console Mods in Canada: 2026 Legal & Hardware Guide
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- Memory Prices Climb as Samsung and SK Hynix Pour $590B Into Chips
- How to Find and Join Active UT99 and UT2004 Servers in 2026
- DIY NVIDIA 3D Vision Emitter: Building One with an RP2040
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090