SAFFUN 2 Pack Wireless USB SNES Controller for Switch 1 & 2
Bottom line: The SAFFUN 2 Pack Wireless USB SNES Controller for Switch 1 & 2 ($39.99 on Amazon as of 2026-10-23 10:14 UTC): 2.4 GHz USB receiver gives plug-and-play wireless up to 33 feet (10 m); main trade-off: 2.4 GHz dongle only — no Bluetooth, needs a free USB port to pair.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-23. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 2.4 GHz USB receiver gives plug-and-play wireless up to 33 feet (10 m)
- ✓ Works with Switch/OLED, PC, Mac, Android, Steam Deck and Raspberry Pi
- ✓ Rechargeable 420mAh battery rated ~10 hrs per 2.5-hour charge
- ✓ Built-in screenshot button plus the classic SNES button layout
Cons
- ✗ 2.4 GHz dongle only — no Bluetooth, needs a free USB port to pair
- ✗ Small 420mAh cell means recharging after roughly 10-hour sessions
- ✗ D-pad only, no analog sticks — awkward for modern 3D games
- ✗ Loose USB receiver can be misplaced; 33-ft range wants line of sight
SpecPicks Verdict
SpecPicks scored SAFFUN 2 Pack Wireless USB SNES Controller for Switch 1 & 2 using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. SAFFUN's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- USB Wireless SNES Controller-fully compatible with Switch & Switch 2. Great for retro emulators on Windows PC, macOS, Linux and Raspberry Pi.
- 2.4GHz Wireless: Stable 10m(33ft) range with zero-lag performance
- Plug & Play: Standard USB receiver; no drivers needed for compatible devices
- Responsive Controls: High-sensitivity buttons for precise retro gaming
- Built-in rechargeable battery, 10-hour runtime
- Screenshot Capture: Built-in button for in-game screenshots (Switch only)
Full Specifications
| Brand | SAFFUN |
|---|---|
| Color | Switch-Compatible Multicolor |
| Model Name | SNES |
| Plug & Play | Standard USB receiver; no drivers needed for compatible devices |
| Connectivity | Wireless, USB, 2.4GHz |
| Power Source | Battery Powered |
| Compatibility | PC, Switch, SNES, Android, Mac, Linux |
| 2.4GHz Wireless | Stable 10m(33ft) range with zero-lag performance |
| Button Quantity | 1 |
| Connection Type | Wireless |
| Controller Type | Wireless |
| Item Dimensions | 8 x 6 x 0.72 inches |
| Hardware Platform | Laptop, Nintendo Switch, Nintendo Switch 2, Raspberry Pi, Windows PC, macOS |
| Incompatible with | Android TV Box, Fire TV, Chromebook, SteamOS, Tesla, C64 |
| What's in the box | Wireless Controllers, USB receivers, Charging Cables, User manual |
| Compatible Devices | Nintendo Switch, Nintendo Switch 2, Raspberry Pi, Windows PC, macOS |
| Screenshot Capture | Built-in button for in-game screenshots (Switch only) |
| Additional Features | Ergonomic, Multiuse, Wireless |
| Responsive Controls | High-sensitivity buttons for precise retro gaming |
| Connectivity Technology | Wireless |
| Full listing title | 2 Pack Wireless USB SNES Controller for Switch 1 & 2, PC, Mac (Multicolor) | (Rechargeable), (Plug & Play), (Ultra-Low Latency 2.4GHz Receiver), Compatible with Switch Online / Switch OLED, Raspberry Pi |
Hardware benchmark data
Ready to buy?
2 Pack Wireless USB SNES Controller for Switch 1 & 2, PC, Mac (Multicolor) | (Rechargeable), (Plug & Play), (Ultra-Low Latency 2.4GHz Receiver), Compatible with Switch Online / Switch OLED, Raspberry Pi is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-23. Price and availability subject to change.
Related Single Board Computers
2 Pack Wireless USB SNES Controller for Switch 1… head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Perplexity's Local-or-Cloud Router: What Hardware Runs the Local Half
- AI-Assisted Driver Hunting on Voodoo3 + GeForce 4 Ti: A 2026 Win98 Workflow
- Panther Lake NPU vs RTX 3060 12GB for Local LLM Inference
- Raspberry Pi Locator Shuts Down in July: Where to Buy a Pi Now
- Best GPU for Local LLMs Under $400 in 2026
- OpenAI's Codex Price War: When Local Coding on an RTX 3060 Wins
- Genesis Mini vs SNES Classic vs a Pi RetroPie in 2026
- Best 27-inch 4K Monitor for PC and Console: Odyssey vs KOORUI
- Best Quiet PC Upgrades for Apartment Gaming in 2026
- Best SSD for a Local-LLM Rig in 2026: NVMe vs SATA
- Meta Muse Spark 1.1 Hits 51 on the Intelligence Index: The Local Angle
- Best Controller for Retro Emulation on PC: 8BitDo Pro 2 vs GameSir G7 SE
- Why NVIDIA Killed 3dfx: How the Voodoo Brand Still Haunts Modern GPU Launches
- Best GPU for Qwen3 30B-A3B: What the 3B Active Path Really Needs
- Qwen 3.6 35B-A3B on RTX 3060 12GB: Local LLM Throughput Guide (2026)
- DeepSeek V4 Flash on a 12GB RTX 3060: The Cheapest Agentic Model, Run Local
- CompactFlash as a Silent IDE Boot Drive in a Retro Windows 98 Gaming PC: Full 2026 Guide
- Did the Steam Deck Get a New Box Design? What Changed
- Ryzen 5 5600G vs Ryzen 7 5800X for a Budget 2026 Build
- Best Budget SSD for 2026: 5 SATA and NVMe Picks
- Grok Imagine 1.5 Brings 720p Image-to-Video — Can You Run It Locally?
- Best Raspberry Pi Alternative for Klipper in 2026 (and When the Pi Still Wins)
- Is My CPU Sufficient for Light Universe Simulations?
- Intel Core Ultra X7 Panther Lake Performance on Linux 7.1
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090