WALI Dual Monitor Wall Mount for 17 to 38 Inch
Status: WALI Dual Monitor Wall Mount for 17 to 38 Inch: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The WALI Dual Monitor Wall Mount for 17 to 38 Inch: Holds 17-38 inch screens, so ultrawide panels fit without a separate bracket; main trade-off: 19.8 lb per-arm ceiling rules out heavier 38 inch and glass-front panels.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:
Similar: BONTEC Dual Monitor Desk Mount — $26.99 on Amazon as of 2026-10-07 04:15 UTC (price may vary).
Similar: Dual Monitor Wall Mount for 13 to 32 Inch… — $39.99 on Amazon as of 2026-10-07 04:13 UTC (price may vary).
Similar: MOUNT PRO Dual Monitor Wall Mount for 13 to 32… — $37.99 on Amazon as of 2026-10-07 04:22 UTC (price may vary).
Pros & Cons
Pros
- ✓ Holds 17-38 inch screens, so ultrawide panels fit without a separate bracket
- ✓ Telescoping arms slide into each other for a flush-to-wall, stability-focused setup
- ✓ Full articulation: 45 degree tilt, 15 degree swivel, 360 degree portrait/landscape rotation
- ✓ Standard 75x75mm and 100x100mm VESA holes cover most current monitors
- ✓ Frees the entire desktop; included cable clips route cords behind the screens
Cons
- ✗ 19.8 lb per-arm ceiling rules out heavier 38 inch and glass-front panels
- ✗ Wall-only mount needs concrete, brick, or a located wood stud to install
- ✗ Fixed wall position means height changes require re-drilling the mounting plate
- ✗ Each arm carries one screen, so mismatched monitor depths need manual re-leveling
SpecPicks Verdict
SpecPicks scored WALI Dual Monitor Wall Mount for 17 to 38 Inch using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. WALI's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Compatibility: Fits ultrawide and regular monitor screens up to 38", and 19.8 lbs in weight (each) with mounting holes 75x75mm or 100x100mm. Heavy-duty wall mount fits concrete/brick wall, wood stud
- Fully Adjustment: Adjustable mount offers +45° ~ -45° tilt, +15° ~ -15° swivel, and 360° rotation for comfortable viewing angles. Monitors can be placed in portrait or landscape orientation
- Unique Design: Heavy duty arms adjust in length to fit larger, ultra-wide monitors. Telescoping design expands arms straight outwards, creating a clean, flush-to-wall setup. The arms slide into each other for added strength and stability
- Save Desk Space: Protect your equipment and clear room on your desktop by getting your screens conveniently mounted to the wall at an ideal height. Cable clips are provided to route cords for an organized appearance
- Package Includes: 1 x WALI Dual Monitor Wall Mount (Black), Mounting Hardware Kit, User Manual, experienced and friendly US based customer support available to assist 7 days a week
Full Specifications
| Brand | WALI |
|---|---|
| Color | Black |
| Material | Metal |
| Model Number | 012ARM-38 |
| Mounting Type | Wall Mount |
| Movement Type | Swivel, Tilt |
| Mfr Part Number | 012ARM-38 |
| Number of Items | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Metal |
| Maximum Tilt Angle | 45 degrees |
| Warranty Description | 10 years |
| Maximum-Supported Screen Size | 38 inches |
| Minimum-Supported Screen Size | 17 inches |
| Full listing title | WALI Dual Monitor Wall Mount for 17 to 38 Inch, Ultrawide Monitor Arm for 2 Monitors, Swivel Tilt Computer Wall Mount with Mounting Holes 75x75/100x100, Per Arm Holds Up to 19.8lbs (012ARM-38), Black |
Ready to buy?
Amazon shows no buyable offer for WALI Dual Monitor Wall Mount for 17 to 38 Inch at the last check. A similar in-stock product is BONTEC Dual Monitor Desk Mount. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget AM4 Gaming PC Parts in 2026
- Voodoo 3 3500 TV vs Voodoo 5 5500: Which Late-3dfx Card Should You Hunt For in 2026?
- DeepSeek V4 Pro at $0.04 a Task: When Local Still Beats the Cloud
- Logitech G920 vs HORI Overdrive for Sim Racing in 2026
- Best Budget Streaming & Content-Creation Gear in 2026: 5 Picks That Punch Above Their Price
- Can the Ryzen 5 5600G Run Local LLMs Without a GPU?
- Best Wireless Controller for Sega Genesis Mini and Retro Emulation in 2026
- DeepSeek V4 vs Claude Opus 4.6: Local Inference Hardware for the Open-Weight Challenger
- Sound Blaster Audigy 2 ZS vs Live! 5.1: WinXP Gaming Audio in 2026
- Best GPU for ComfyUI and SDXL Under $350 — Why the RTX 3060 12GB Still Wins
- 8BitDo SN30 Pro on SNES Classic and Genesis Mini: Bluetooth Setup Guide
- 1998 3dfx Voodoo2 SLI Build Guide: Period-Correct Glide Gaming with a CompactFlash Boot Drive
- Ryzen 5 5600G APU for Local LLM Inference in 2026: What You Can Actually Run
- Best PC Gaming Controller in 2026: GameSir G7 SE vs DualSense vs 8BitDo Pro 2
- Pentium III Coppermine vs Tualatin: Which 2001 LAN Build CPU Aged Better
- Two RTX 3060 12GB vs One Bigger GPU for Local 70B Models
- Raspberry Pi 4 8GB as a Low-Power Quake 3 / OpenArena / UT99 Dedicated Server (2026 Build Log)
- Abit BP6 Dual Celeron 366 Build Guide: The Legendary $200 SMP Workstation in 2026
- Raspberry Pi OS Gets a Desktop Refresh: What Changes for Pi 4 Users
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming in 2026
- Best Gaming Room Lighting in 2026: LED Strips and Ring Lights
- Best Capture Device for Recording Retro Consoles and Old PCs in 2026
- Can a Raspberry Pi 4 8GB Run a Local LLM with Ollama?
- Coreboot + AMD openSIL: Windows 11 Works on MSI Ryzen
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090