SPJIUQI Single Axis Joystick for Genie Series
Bottom line: The SPJIUQI Single Axis Joystick for Genie Series is a specs-and-price decision rather than a crowd-consensus one in the joysticks & game port category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Part Number:137634, 137634GT
- ✓ Backed by SPJIUQI's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for SPJIUQI Single Axis Joystick for Genie Series, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the joysticks & game port category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Part Number:137634, 137634GT
- Compatible with Genie Vertical Mast Lift Models: GR-12, GR-15, GR-20, GRC-12, QS-12R, QS-12W, QS-15R, QS-15W, QS-20R, and QS-20W.
- Compatible with Genie Scissor Lift Models:GS-1530, GS-1532, GS-1930, GS-1932, GS-2032, GS-2046, GS-2632, GS-2646, GS-2646 AV, GS-2646 AV35, GS-2669 BE, GS-2669 DC, GS-3232, GS-3246, GS-3369 BE, GS-3369 DC, GS-4047, GS-4069 BE, and GS-4069 DC.
- Best Service: You can always contact us if you can't identify the product. We offer one-on-one customer service to help you solve the problem until you are satisfied.
- If you contact us between 7 PM and 11 PM EST, 6 PM and 11 PM CST, 5 PM and 11 PM MST, and 4 PM and 11 PM PST, I can respond within 10 minutes.
Full Specifications
| Brand | SPJIUQI |
|---|---|
| Part Number | 137634, 137634GT |
| Power Source | Battery Powered |
| Controller Type | Joystick |
| Hardware Platform | Desktop |
| Compatible Devices | Windows |
| Included Components | NO |
| Connectivity Technology | USB |
| Manufacturer Part Number | 137634, 137634GT |
| Full listing title | SPJIUQI Single Axis Joystick for Genie Series | Fit for Genie Lift GR-12 GR-15, GS-1532 GS-1930, QS-12R QS-12W QS-15R QS-15W, Joystick Lift Controller, OEM# 137634 137634GT |
Ready to buy?
SPJIUQI Single Axis Joystick for Genie Series | Fit for Genie Lift GR-12 GR-15, GS-1532 GS-1930, QS-12R QS-12W QS-15R QS-15W, Joystick Lift Controller, OEM# 137634 137634GT is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Should You Overprovision vCPU Per VM in a Homelab?
- Wired vs Bluetooth Headsets for Competitive FPS in 2026: The Latency Math
- OpenAI Codex Now Drives Windows Autonomously: What It Means for Local AI Rigs
- Best Webcam for Twitch Streaming Under $100 in 2026
- RTX PRO 6000 vs RTX 5090 for Local 70B LLMs: 96GB vs 32GB
- Raspberry Pi Pico SDK 2.3.0 Ships: What Changed
- Motherboard Sales Fell 33% in 2026: Is DIY PC Building Dying?
- Step 3.7 Flash Benchmarks: What You Can Actually Run on 12GB
- Have Qwen Said Anything About Further Qwen 3.6 Models?
- GLM-5.2 vs Frontier Models on GDPval-AA: What It Means for Local Builders
- Best Budget Sim Racing Wheel: Logitech G29 vs HORI vs Thrustmaster
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- Best Budget Local-AI Workstation Parts in 2026: 5 Picks
- NotebookLM Now Runs Code: Self-Hosting the Same Idea on a 12GB GPU
- Best Wireless Productivity Keyboards for Home Office in 2026
- US Forces Anthropic to Disable Claude Fable 5: Local Fallbacks
- TCL 27R944K Review: 165Hz Mini LED Gaming Monitor
- Why You Shouldn't Leave Model Selection on Default in Copilot, Gemini, and Other AI Tools
- Build a Frigate AI Security-Camera NVR on a Raspberry Pi 4 8GB in 2026
- Authentic Retro PC Audio in 2026: Sound BlasterX G6 vs Vintage AWE64 and Audigy
- 768GB Intel Optane DIMM Rigs: Can Cheap Persistent Memory Really Run a 1T-Parameter LLM?
- Jetson Orin Nano Super vs Raspberry Pi 5: Real Edge-AI Benchmarks (2026)
- Best Gaming Mouse Pad for Esports & Office Use in 2026
- Raspberry Pi 5 8GB Review (2026): Still the SBC to Beat
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090