Walfront

Engraver Motherboard 32 Bit Laser Engraver Mainboard Laser Cutter Controller Board Replacement for Makerbase MKS DLC32 V2.1 12‑24VDC

Name: Engraver Motherboard 32 Bit Laser Engraver Mainboard Laser Cutter Controller Board Replacement for Makerbase MKS DLC32 V2.1 12‑24VDC
Brand: Walfront
SKU: B0D79MDKH1
Price: 36.60 USD
Availability: InStock

By Mike Perry, Hardware Editor · Verified 2026-09-15

Mike Perry has researched PC hardware since 2014, tracking 80+ GPU generations, 50+ retro handheld platforms, and 30+ vintage PC configurations. He synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. View full credentials →

$36.60

As an Amazon Associate, SpecPicks earns from qualifying purchases.

🛒 See live eBay price Also on Amazon — View Current Price → Compare to similar retro motherboards

*Price sourced from Amazon.com. Price and availability subject to change.

Bottom line: The Engraver Motherboard 32 Bit Laser Engraver Mainboard Laser Cutter Controller Board Replacement for Makerbase MKS DLC32 V2.1 12‑24VDC is a specs-and-price decision rather than a crowd-consensus one in the retro motherboards category, priced around $36.60. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.

SpecificationItem Type: Laser Engraver MainboardMaterial: PCBModel: FOR MKS DLC32, motherboard. A4988, driver.Voltage: 12-24VDCMCU: ESP32-WROOM-32U, 32bits.MCU Frequency: 240MHzFLASH: 8192K BytesRAM: 520K BytesEngraving Speed: <=8000mm/minPC Engraving: SupportsOffline Mode: SupportsLCD: SupportsIntegrated WIFI: SupportsWeb Page Control: SupportsMobile APP Control: SupportsFor GRBLaser: SupportsFor LightBurn: SupportsA4988 Driver Features and Advantages:1. Low RDS on output.2. Automatic current attenuation mode detection or selection.3. Mixing with slow current decay mode.4. Synchronous…

SpecPicks Verdict

SpecPicks scored Engraver Motherboard 32 Bit Laser Engraver Mainboard Laser Cutter… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the retro motherboards category. Walfront's retro motherboards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for retro motherboards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.

Pros & Cons

Pros

✓ Backed by Walfront's warranty and support channels
✓ Ships via Amazon with Prime eligibility and the standard returns policy

Cons

✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified

Key Features

Excellent Design - Adopts premium 4-layer PCB, integrates 2560 and the control board into one PCB, which makes wiring more simple and stable.
With Stepper Motor The motherboard adopts a dedicated power chip supporting 12V-24V and multiple stepper units of 4988, 8825, TMC2208, TMC2100, suitable for LCD2004, LCD12864, for MKS TFT24, 28, 32, 35, 70.
Ultra-High Speed Computing Ability - Due to the high-speed IO speed and the powerful timer of the main control module, the MKS DLC32 is suitable for beginners to upgrade the main board of the Makerbase wood carving machine. The speed of the tool accessories can reach 8000mm per minute, which can reach a very high carving speed.
Easy Control The makerbase CNC engraving machine motherboard also has a mobile app function, which can be connected to MKS DLC32, control movement, edit pictures, upload files and more.
Wide Compatibility The DLC32 offline controller is compatible with GRBLLASER and Lightburn software, which is very easy to use for all engraving machine users.

Full Specifications

Brand	Walfront
USB 2.0	1
Platform	No Operating System
CPU Socket	LGA
Model Name	WALFRONToi0kn586bf
Model Number	WALFRONToi0kn586bf
Item Type Name	Casting Machines
Mfr Part Number	WALFRONToi0kn586bf
Number of Ports	3
Total Usb Ports	1
Processor Socket	LGA
Compatible Devices	Makerbase MKS DLC32 V2.1
Compatible Processors	ESP32-WROOM-32U
RAM Memory Technology	DDR3L
Memory Slots Available	1
Graphics Card Interface	Integrated
Main Power Connector Type	24-Pin
System Bus Standard Supported	APB

Ready to buy?

Engraver Motherboard 32 Bit Laser Engraver Mainboard Laser Cutter Controller Board Replacement for Makerbase MKS DLC32 V2.1 12‑24VDC is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

See live eBay listings →

*Price sourced from Amazon.com. Price and availability subject to change.