Skip to main content
EZDIY-FAB Shield PCIe 5.1 12V-2x6 90° GPU Extension Cable, White, STD
EZDIY-FAB

EZDIY-FAB Shield PCIe 5.1 12V-2x6 90° GPU Extension Cable, White, STD

Bottom line: The EZDIY-FAB Shield PCIe 5.1 12V-2x6 90° GPU Extension Cable: 90° 16-pin connector routes the cable along the card, reducing tight bends at the GPU socket; main trade-off: maker advises against use with the RTX 5090 due to extreme power spikes.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar rgb & lighting

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 90° 16-pin connector routes the cable along the card, reducing tight bends at the GPU socket
  • ✓ Flexible 16AWG wire makes routing from the existing PSU cable to the GPU easier
  • ✓ Cable combs included to keep the sleeved wires aligned and tidy
  • ✓ Works as a 12V-2x6 and 12VHPWR extension for compatible RTX 40 and RTX 50 cards
  • ✓ White sleeving and shield-style cover suit glass-panel and vertical-GPU showcase builds

Cons

  • ✗ Maker advises against use with the RTX 5090 due to extreme power spikes
  • ✗ Extension only: it cannot plug directly into a modular PSU
  • ✗ Adds a second connection that must be fully seated with no visible gap
  • ✗ Fixed 90° angle may not match every card's socket position or case layout

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored EZDIY-FAB Shield PCIe 5.1 12V-2x6 90° GPU Extension Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. EZDIY-FAB's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Shield-Inspired GPU Cable Design: Features a streamlined shield-style connector cover and sleeved cable finish, adding a clean, coordinated look to tempered-glass cases, vertical GPU layouts, and showcase PC builds.
  • Flexible 16AWG Extension Cable: Built with flexible 16AWG wire for easier routing between the existing PSU GPU cable and compatible graphics cards. Included cable combs help keep the extension aligned and organized.
  • 90° 12V-2x6 Connector: The right-angle 16-pin connector redirects the cable along the graphics card for cleaner routing, helping reduce tight bending near the GPU power socket in compact ATX and ITX cases.
  • Secure Soldered Connections: Reinforced soldered joints help maintain a stable electrical connection and reduce stress caused by normal cable positioning. Fully insert both ends and confirm that no visible gap remains.
  • RTX 40/50 Series Compatibility: Designed as a 16-pin 12V-2x6 and 12VHPWR extension for compatible RTX 40 and RTX 50 Series graphics cards. Connects to an existing compatible PSU cable and is not intended for direct modular PSU connection.
  • NOTE: Not recommended use for RTX 5090 due to extreme power spikes.For safe use, ensure a 100% secure installation with no gaps.

Full Specifications

NOTENot recommended use for RTX 5090 due to extreme power spikes.For safe use, ensure a 100% secure installation with no gaps.
BrandEZDIY-FAB
ColorWhite
ModelEZDPR230-5
Wattage600 watts
Cable TypePCIe 5.1
Item ShapeRound
Model NameEZDPR230-5
Unit Count1 Count
Part NumberEZDPR230-5
CompatibilityPC
Connector TypeUSB Type C
Number of Pins16
Maximum Voltage12 volts
Special FeatureUV Resistant
Connector GenderMale-to-Female
Specification MetRoHS
Compatible DevicesGraphics Cards
Indoor Outdoor UsageIndoor
Compatible Phone ModelsNo Compatible Phone Models

Ready to buy?

EZDIY-FAB Shield PCIe 5.1 12V-2x6 90° GPU Extension Cable, White, STD is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related RGB & Lighting

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
EZDIY-FAB Shield PCIe 5.1 12V-2x6 90° GPU Extension Cable, White, STD
View on Amazon →