InnoGear Mic Stand Floor Max Height 82.28" Microphone Stand Holder Boom Arm
Bottom line: The InnoGear Mic Stand Floor Max Height 82.28" Microphone Stand Holder ($37.99 on Amazon as of 2026-11-20 23:15 UTC): Adjustable 30.82 to 82.28 in, fits seated podcasting or standing performances; main trade-off: 5.8 lb base adds bulk, less ideal for portable travel setups.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Adjustable 30.82 to 82.28 in, fits seated podcasting or standing performances
- ✓ Heavy 5.8 lb weighted base keeps mics stable on stage or desk
- ✓ Reinforced 25mm thickened poles resist tipping and wobble
- ✓ 360-degree boom arm plus 180-degree mic clip for precise angles
- ✓ Fits Blue Yeti, HyperX QuadCast, Shure SM58, Samson Q2U, Fifine K669B
Cons
- ✗ 5.8 lb base adds bulk, less ideal for portable travel setups
- ✗ 82.28 in max reach can overwhelm compact desktop-only spaces
- ✗ Includes only 3/8 to 5/8 adapter, no shock mount bundled
- ✗ Floor stand footprint takes more room than a clamp arm
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for InnoGear Mic Stand Floor Max Height 82.28" Microphone Stand Holder…, so this read rests on the manufacturer's listed specs and the current price in the streaming gear category (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "Adjustable 30.82 to 82.28 in, fits seated podcasting or standing performances"; the main trade-off is "5.8 lb base adds bulk, less ideal for portable travel setups". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Wide Height Range for Versatile Use: Effortlessly adjustable from 30.82 to 82.28 inches, this mic stand accommodates any setup, from seated podcasting to standing performances, making it a perfect companion for musicians, broadcasters, and content creators.
- Unmatched Stability and Durability: Built with a weighted 5.8 lb base and reinforced 25mm thickened poles, this stand is engineered for superior balance and long-lasting reliability, outperforming others with lighter bases and thinner poles. Whether on stage or in the studio, your microphone remains secure and stable.
- Customizable Setup Options: Offering two configurations—use with the boom arm for extended reach and precise mic placement, or without for a compact setup—this stand adapts seamlessly to diverse recording and performance scenarios.
- Exceptional Adjustability for Perfect Angles: Achieve professional-level sound capture with a 360-degree rotatable boom arm and a 180-degree flexible mic clip. Fine-tune your microphone positioning effortlessly for clear, high-quality audio in every session.
- Broad Compatibility for All Your Needs: Compatible with FIFINE AM8, Audio-Technica AT2020, Blue Yeti, HyperX QuadCast, Shure SM58, Samson Q2U, Fifine K669B and more, this stand comes fully equipped with a 3/8" to 5/8" adapter, mic holder, and mic clip. Designed for podcasting, studio work, and live performances, it ensures your equipment is always ready to deliver.
Full Specifications
| Brand | InnoGear |
|---|---|
| Color | Black |
| Style | Detachable Adjustable Microphone Stand Floor |
| Weight | 5.8 lb |
| Material | Alloy Steel, Iron |
| Base Type | Flat |
| Model Name | TS250 |
| Unit Count | 1 Count |
| Finish Type | Matte |
| Model Number | TS250 |
| Material Type | Alloy Steel, Iron |
| Product Style | Detachable Adjustable Microphone Stand Floor |
| Maximum Height | 82 inches |
| Body Material Type | Alloy Steel, Iron |
| Included Components | Mic Holder, Mic Clip, 3/8" to 5/8" Adapter |
| Warranty Description | 12 months. |
| Manufacturer Part Number | TS250 |
| Mount thread size (inches) | 3/8", 5/8" inches |
| Microphone Stand Thread Size | 3/8 inch, 5/8 Inch |
| Full listing title | InnoGear Mic Stand Floor Max Height 82.28" Microphone Stand Holder Boom Arm | for Blue Yeti Shure Fifine HyperX, Extendable, Seated to Standing, Stable, For Any Recording Setup, Mini Height 30.82" |
Ready to buy?
InnoGear Mic Stand Floor Max Height 82.28" Microphone Stand Holder Boom Arm | for Blue Yeti Shure Fifine HyperX, Extendable, Seated to Standing, Stable, For Any Recording Setup, Mini Height 30.82" is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Local LLM Hardware in 2025: Picking GPUs, CPUs & RAM
- Best SSD for 2000s LAN Party PC Builds (2026)
- Homelab Changes You Wish You'd Made Sooner
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 4090
- Intel Arc B60 Stable Diffusion: Setup & Benchmarks 2025
- RTX 5080 vs RX 7900 XTX: Which GPU Wins in 2026?
- Intel Arc A770 for Local LLMs: 2026 Benchmark Guide
- Local LLM Setup in 2026: AMD GPU Guide by Model Size
- Can the Ryzen 5 5600G Game at 1080p Without a Graphics Card in 2026?
- Open WebUI + Ollama on an RTX 3060: The Self-Hosted ChatGPT Alternative for 2026
- Raspberry Pi 4 as an SMB1 File Server for Windows 98 Retro Rigs
- Best Storage and IDE Adapters for Retro PC Builds in 2026
- Raspberry Pi 4 8GB vs Ryzen 5 2600 for Gemma 3 4B: Which Cheap Box Wins?
- Best Budget AM4 Build for Local LLM Inference in 2026
- Building a 2002 LAN Party PC: GeForce 4 Ti + Athlon XP
- Minimal Raspberry Pi 5 Case: Friction-Fit 3D Printing Guide
- Intel Arc B580 vs RTX 3060 12GB for Local LLMs in 2026
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- Noctua NH-U12S vs DeepCool AK620: Best Air Cooler for an Overclocked Ryzen
- Stable Diffusion on Intel Arc vs RTX 3060 12GB: Which Budget GPU Renders Faster?
- RTX 3060 12GB Showdown: ZOTAC Twin Edge vs MSI Ventus 2X (2026)
- Ryzen AI Max+ 395 Specs: Full Breakdown and Comparison
- AMD Ryzen 9 9950X3D2 on Linux vs Windows 11: Why the Penguin Wins
- Build a PiKVM V3 Device for Remote Server Management (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090