Okinos

Okinos Micro ATX Case

Name: Okinos Micro ATX Case, 4 × 120mm ARGB Non-PWM Case Fans Pre-Installed, MATX PC Case, Temper Glass Side Panel, with Type-C, Black, Cypress 3 ARGB
Brand: Okinos
SKU: B0DQPR55H6

Status: Okinos Micro ATX Case: Unavailable on Amazon as of 2026-10-07 04:18 UTC. SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

🛒 Search eBay for this model

Bottom line: The Okinos Micro ATX Case: Four 120mm ARGB fans pre-installed at 1000RPM, no separate fan purchase; main trade-off: GPU limit drops to 285mm with front fans rear-mounted, tight for long cards.

Unavailable on Amazon as of 2026-10-07 04:18 UTC

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: Okinos Genuine Walnut Wood Micro ATX Case — $59.99 on Amazon as of 2026-10-07 04:20 UTC (price may vary).

View Current Price — $59.99

Similar: Okinos Aqua 3 — $57.99 on Amazon as of 2026-10-07 04:20 UTC (price may vary).

View Current Price — $57.99

Similar: DARKROCK EC2 Black ATX Mid Tower PC Case — $54.99 on Amazon as of 2026-10-07 04:20 UTC (price may vary).

View Current Price — $54.99

Original listing (currently unavailable) → Compare to similar pc cases

By Mike Perry, Founder & Editor-in-Chief · Listing data updated 2026-10-07

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. About the author →

Pros & Cons

Pros

✓ Four 120mm ARGB fans pre-installed at 1000RPM, no separate fan purchase
✓ ARGB controller plus 1-to-3 3-pin splitter included for motherboard-synced lighting
✓ Type-C 3.2 Gen 2 at 10Gbps on the front panel, plus two USB 3.0 ports
✓ Fits CPU air coolers up to 164mm tall, clearing most large tower coolers
✓ Three-sided mesh intake (1.7mm front, 2mm lower left) for direct airflow

Cons

✗ GPU limit drops to 285mm with front fans rear-mounted, tight for long cards
✗ Fans are non-PWM 3-pin, so speed is fixed at 1000RPM with no ramping curve
✗ Tempered glass side panel shows dust and fingerprints on a mesh-heavy chassis
✗ Micro ATX only, so ATX and E-ATX boards will not fit

SpecPicks Verdict

SpecPicks scored Okinos Micro ATX Case using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. Okinos's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

【Airflow Amplified】The mesh design amplifies airflow for exceptional cooling, ensuring your system stays chill under pressure.
【Pre-Installed 4 × 120mm ARGB Fans】3-pin H12 ARGB (Non-PWM) case fans (fan speed: 1000RPM). Includes an ARGB controller with four 3-pin connectors and a 1-to-3 3-Pin fan splitter cable, allowing for motherboard synchronized lighting effects and making cable management easy.
【GPU Compatibility】≤285mm (When the fan is installed at the rear of the front panel); ≤320mm (When the fan is installed in the front of the front panel).
【CPU Air Cooling Compatibility】Max. CPU Cooler Height ≤ 164mm.
【Features a Type-C 3.2 Gen 2 (10Gbps) Interface】 Includes a Type-C 3.2 Gen 2 port, two USB 3.0 ports, audio jacks, and a power switch with start and restart functions. ARGB fan control button is available for customizing lighting.
【1.7mm + 2mm Triangular Mesh Design】1.7mm mesh on the front panel and 2mm mesh on the lower left side panel, combined with the pre-installed 4 × H12 ARGB fans, maintain optimal airflow inside the chassis, delivering exceptional cooling performance.

Full Specifications

Brand	Okinos
Color	Black
Material	Tempered Glass
Case Type	Mini-Tower
Model Name	Cypress 3 ARGB
Unit Count	1.0 Count
Connectivity	USB
Compatibility	PC, Switch
Cooling Method	Air
Antenna Location	Gaming
Compatible Devices	ATX Motherboards
Enclosure Material	Tempered Glass
Total USB 3.0 Ports	2
Warranty Description	1 Year Manufacturer
Hard Disk Form Factor	3.5 Inches
Supported Motherboard	Micro ATX
Internal Bays Quantity	4
Item Dimensions D x W x H	14.65"D x 8.27"W x 15.83"H
Motherboard Compatability	Micro ATX
Power Supply Mounting Type	Bottom Mount
Full listing title	Okinos Micro ATX Case, 4 × 120mm ARGB Non-PWM Case Fans Pre-Installed, MATX PC Case, Temper Glass Side Panel, with Type-C, Black, Cypress 3 ARGB

Ready to buy?

Amazon shows no buyable offer for Okinos Micro ATX Case at the last check. A similar in-stock product is Okinos Genuine Walnut Wood Micro ATX Case. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $59.99