Okinos
Okinos Genuine Walnut Wood Micro ATX Case
Bottom line: The Okinos Genuine Walnut Wood Micro ATX Case: Genuine walnut wood front accents suit a desk or living-room build; main trade-off: non-PWM 3-pin fans run fixed at ~1000RPM, no speed control.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Genuine walnut wood front accents suit a desk or living-room build
- ✓ Four 120mm 3-pin fans pre-installed, plus a 1-to-3 splitter cable
- ✓ Front Type-C 3.2 Gen 2 (10Gbps) port plus two USB 3.0
- ✓ Fits GPUs up to 320mm and 164mm-tall CPU air coolers
- ✓ Three-sided mesh intake for strong Micro ATX airflow
Cons
- ✗ Non-PWM 3-pin fans run fixed at ~1000RPM, no speed control
- ✗ Fans are non-ARGB, so no RGB lighting out of the box
- ✗ Micro ATX only, will not accept a full ATX motherboard
- ✗ Rear front-panel fan mount cuts GPU clearance to 285mm
SpecPicks Verdict
SpecPicks scored Okinos Genuine Walnut Wood Micro ATX Case using a rating × review-volume × price-fit model applied to published specs and reviews across the pc cases category. Okinos's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Elegant Walnut Wood Decoration】The front panel features walnut wood on both sides, effortlessly complementing your home decor.
- 【Pre-Installed 4 × 120mm 3Pin Fans】3-pin H12 (Non-PWM & Non-ARGB) case fans (fan speed: 1000RPM). Includes a 1-to-3 3-Pin fan splitter cable for easy cable management.
- 【GPU Compatibility】≤285mm (When the fan is installed at the rear of the front panel); ≤320mm (When the fan is installed in the front of the front panel).
- 【CPU Air Cooling Compatibility】Max. CPU Cooler Height ≤ 164mm.
- 【Features a Type-C 3.2 Gen 2 (10Gbps) Interface】 Includes a Type-C 3.2 Gen 2 port, two USB 3.0 ports, audio jacks, a power switch, and a reset button.
- 【1.7mm + 2mm Triangular Mesh Design】1.7mm mesh on the front panel and 2mm mesh on the lower left side panel, combined with the pre-installed 4 × H12 3Pin (Non-PWM & Non-ARGB) fans, maintain optimal airflow inside the chassis, delivering exceptional cooling performance.
Full Specifications
| Brand | Okinos |
|---|---|
| Color | Black |
| Material | Walnut Wood |
| Case Type | Mid Tower |
| Model Name | Cypress 3 Wood |
| Connectivity | USB |
| Compatibility | PC, Switch |
| Cooling Method | Air |
| Number of Items | 1 |
| Antenna Location | Gaming |
| Compatible Devices | Micro ATX motherboards, Standard ATX power supplies (up to 150mm deep), GPUs up to 285mm or 320mm, CPU coolers up to 164mm in height |
| Enclosure Material | Walnut Wood |
| Total USB 3.0 Ports | 2 |
| Warranty Description | 1 Year Manufacturer |
| Supported Motherboard | Micro ATX |
| Internal Bays Quantity | 4 |
| Item Dimensions D x W x H | 14.65"D x 8.27"W x 15.83"H |
| Motherboard Compatability | Micro ATX |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses For Product | Gaming |
| Full listing title | Okinos Genuine Walnut Wood Micro ATX Case, MATX PC Case with 4 × 120mm 3 Pin Non-PWM Case Fans Pre-Installed, Temper Glass Side Panel, with Type-C, Black, Cypress 3 Wood |
Ready to buy?
Okinos Genuine Walnut Wood Micro ATX Case, MATX PC Case with 4 × 120mm 3 Pin Non-PWM Case Fans Pre-Installed, Temper Glass Side Panel, with Type-C, Black, Cypress 3 Wood is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related PC Cases
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best AM4 CPU for 1080p Gaming in 2026: 5 Value Picks
- Imaging and Restoring Vintage IDE Drives in 2026: SATA/IDE-to-USB Adapters Compared
- Best Budget GPU for RPCS3 PS3 Emulation in 2026
- DFlash Speculative Decoding on Qwen3.5-35B-A3B: How an RTX 2080 Super 8GB Hits 60+ tok/s
- Best DualSense and PC-Compatible Controller (2026)
- llama.cpp Vulkan vs CUDA on a 12GB RTX 3060: Which Backend Wins?
- Qwen3.6-27B at 80 TPS on RTX 5090: Is the Claim Real?
- M5 vs DGX Spark vs Strix Halo vs RTX 6000: AI Workload Guide
- A 3D-Printed Switch Steering Wheel V2 Brings Adaptive Racing to More Players
- Best Gaming Mouse for FPS Esports Under $80 (2026)
- Best GPU for Ryzen 5 5500 in 2026 (Budget to 1440p)
- Expanding the SNES Classic and Genesis Mini Library in 2026
- Can a Raspberry Pi 4 8GB Run a Local LLM in 2026? Real tok/s and What Fits
- Intel Arc LLM Inference: A770 & B580 Guide 2025
- Build a Plex Media Server on a Raspberry Pi 4 8GB in 2026
- PS3 Emulation Reaches Radeon HD 2000-4000: What It Unlocks
- Did the Steam Deck Get a New Box Design? What Changed
- retrorecs.com: A New Retro Game Recommendation Engine
- Best Budget Streaming & Content-Creation Gear in 2026: 5 Picks That Punch Above Their Price
- Best PC Cooling Solutions for AM4 and AM5 Builds in 2026
- Best Sim Racing Wheel + Shifter Combo Under $400 in 2026: 5 Setups for iRacing, ACC, and GT3
- CompactFlash to IDE Imaging for Win98: Troubleshooting Common Failures
- Aider vs Cline vs Cursor for AI-Assisted Coding in 2026
- gpt-oss 20B: RTX 3060 12GB vs Ryzen 5 5600G CPU-Only (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090