Yuntau 4 Tier Greeting Card Display Stand, Wood Color
Bottom line: The Yuntau 4 Tier Greeting Card Display Stand: 4 tiers at 2.8 in high x 2 in wide per slot, sized for standard greeting cards; main trade-off: screws must be retightened or tiers can loosen, per the maker's own warning.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 4 tiers at 2.8 in high x 2 in wide per slot, sized for standard greeting cards
- ✓ Bamboo boards run 0.35 in / 9 mm thick, acrylic panels 0.16 in / 4 mm
- ✓ 14.96 x 12.2 x 8.27 in footprint fits most retail counters
- ✓ Screw-together assembly with included hardware and instructions, done in minutes
- ✓ Doubles for postcards, business cards, graded sports cards, and jewelry
Cons
- ✗ Screws must be retightened or tiers can loosen, per the maker's own warning
- ✗ Acrylic ships with a protective film you have to peel off every panel
- ✗ At 32.99 USD it costs more than plain wire card racks of the same tier count
- ✗ 2 in tier width limits it to card-size items, not boxed or oversized stock
SpecPicks Verdict
SpecPicks scored Yuntau 4 Tier Greeting Card Display Stand using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Yuntau's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Impressive Dimensions: our greeting card display stand boasts an overall size of about 14.96 x 12.2 x 8.27 inches, providing an ideal fit on your counter's pace; Each of its 4 tiers are about 2.8 inches high and 2 inches wide
- Simple Assembly: with our greeting card holder, your assembly worries are over; Simply remove the protective acrylic surface coating and use the provided screws and instructions to set it up in just a few minutes, but still pay attention to tighten the screws to avoid affecting your experience
- Elegantly Crafted Design: dive into the modern design with our greeting card display rack; Made with a blend of bamboo wood boards and acrylic panels, the construction provides both stability and a full showcase of your distinct items
- Versatile Use: not just limited to greeting cards, our card display shelf can effectively display various items such as postcards, business cards, and jewelry; Ideal for suppliers, retail counters, graded card display baseball sports card and other display needs
- Quality You Can Trust: featuring a bamboo board thickness of around 0.35 inch/ 9 mm and an acrylic board thickness of about 0.16 inch/ 4mm, our card holder stand provides strength, durability, and easy cleaning
Full Specifications
| Brand | Yuntau |
|---|---|
| Color | Wood Color |
| Material | Acrylic, Bamboo |
| Dimensions | 14.96 x 12.2 x 8.27 inch |
| Unit Count | 1 Count |
| Part Number | YES-Yuntau-1162 |
| Item Dimensions | 14.96 x 12.2 x 8.27 inches |
| Number of Items | 1 |
| Number of Levels | 4 |
| Item dimensions L x W x H | 14.96 x 12.2 x 8.27 inches |
Ready to buy?
Yuntau 4 Tier Greeting Card Display Stand, Wood Color is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- DIY Handheld Tricorder Build Guide 2026
- Best Mini-ITX Case for a Small Form Factor Gaming PC in 2026
- Raspberry Pi 4 8GB in 2026: Still the Right Pick for Retro Emulation and Home Servers?
- Best Budget Streaming & Content-Creation Gear in 2026: 5 Picks That Punch Above Their Price
- Best Raspberry Pi Alternatives for AI in 2026
- Best Budget GPU for Local LLMs Under $300 in 2026: Why the RTX 3060 12GB Still Wins
- Ah Yes, 'Gaming' Laptops: The Hype vs. Reality
- How Creative's Sound Blaster Ruled PC Audio for 20 Years
- Can a 12GB RTX 3060 Still Run 2026's Local LLMs?
- Best Budget Local-AI Workstation Parts in 2026: 5 Picks
- Best SATA SSDs for Gaming and Retro PC Builds in 2026
- Best CPU Cooler for the Ryzen 7 5700X: Noctua vs DeepCool vs CoolerMaster
- Best Gaming Controllers for PC in 2026: 5 Top Picks
- Ryzen 5 5600G vs Ryzen 7 5700X: Best Budget Build CPU 2026
- Best Raspberry Pi Alternative for AI Inference in 2026: When to Step Up
- FIDECO vs Unitek vs Vantec: Best IDE-to-USB Adapter for Dumping Retro Drives
- Qwen 3.6 vs Frontier Models on a Local Rig: The Honest Gap
- Best Performance-per-Dollar Hardware Rankings 2026
- Modern Sound Cards on Retro Rigs: The Sound BlasterX G6 for Win9x and DOS Audio
- Train a Kick Drum AI Model on 6GB VRAM (Linux Guide)
- Samsung SSD Brand Guide 2026: Every Drive Worth Buying
- Raspberry Pi Projects for College Students: 2026 Guide
- Best Single-Board Computer Kits for Beginners (2026)
- How to run Qwen 3 32B on NVIDIA GeForce RTX 3090
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090