FREENOVE

Freenove Universal Breakout Board Compatible with Arduino Nano Micro Raspberry Pi Pico 1 2 W ESP32 ESP8266, Terminal Block Shield HAT with Pin Header, GPIO Status LED, 5 V 3.3 V

Name: Freenove Universal Breakout Board Compatible with Arduino Nano Micro Raspberry Pi Pico 1 2 W ESP32 ESP8266, Terminal Block Shield HAT with Pin
Brand: FREENOVE
SKU: B0DT48T7CB
Price: 14.95 USD
Availability: InStock

By Mike Perry, Hardware Editor · Verified 2026-09-06

Mike Perry has researched PC hardware since 2014, tracking 80+ GPU generations, 50+ retro handheld platforms, and 30+ vintage PC configurations. He synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. View full credentials →

$14.95

As an Amazon Associate, SpecPicks earns from qualifying purchases.

🛒 See live eBay price Also on Amazon → Compare to similar emulation hardware

*Price sourced from Amazon.com. Price and availability subject to change.

Bottom line: The Freenove Universal Breakout Board Compatible with Arduino Nano Micro Raspberry Pi Pico 1 2 W ESP32 ESP8266, Terminal Block Shield HAT with Pin Header, GPIO Status LED, 5 V 3.3 V is a niche pick — read recent reviews before buying in the emulation hardware category, priced around $14.95. Compare close alternatives before committing.

Important Notes:This board is only compatible with boards with specific pins.Overview:This breakout board can help you wire and know the status of the GPIO.Just plug your board and connect the power pins to complete the installation.We provide free technical support to help you with any questions and problems.Compatible Models:* Any board (5 V or 3.3 V) with a pin spacing of 0.1 inch (2.54 mm), width 0.6, 0.7, 0.8, 0.9, 1.0 inch and length up to 2.3 inch (24 pin).(Compatible with Arduino Nano / Micro, Raspberry Pi Pico 1 / 2 (W), ESP32, ESP8266.)Tutorial:Comes with tutorial to show how to…

SpecPicks Verdict

SpecPicks scored Freenove Universal Breakout Board Compatible with Arduino Nano Micro… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the emulation hardware category. FREENOVE's emulation hardware lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Mixed or limited buyer feedback at this price point — focus your evaluation on recent reviews that specifically address build quality and long-term reliability, and shortlist one or two close alternatives before deciding.

Common buyer scenarios for emulation hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.

Pros & Cons

Pros

✓ Terminal Block and Header: Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch
✓ Backed by FREENOVE's warranty and support channels
✓ Ships via Amazon with Prime eligibility and the standard returns policy

Cons

✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified

Key Features

Compatible Models: Any board (5 V or 3.3 V) with a pin spacing of 0.1 inch (2.54 mm), width 0.6, 0.7, 0.8, 0.9, 1.0 inch and length up to 2.3 inch (24 pin) (Compatible with Arduino Nano / Micro, Raspberry Pi Pico 1 / 2 (W), ESP32, ESP8266)
Power Supply: If using DC input (6~24 V), can provide 5 V and 3.3 V power (DC-DC circuit, up to 3A); otherwise, can use the power of the main board (Need to configure jumper caps, please refer to the tutorial)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch

Full Specifications

Brand	FREENOVE
Model Name	FNK0101
Model Number	FNK0101
Built-In Media	board
GPIO Status LED	LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED	The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Mfr Part Number	FNK0101
Processor Count	1
Total Usb Ports	1
Compatible Devices	Arduino Nano, Arduino Micro, Raspberry Pi Pico 1, Raspberry Pi Pico 2 (W), ESP32, ESP8266
Included Components	board
Warranty Description	1
RAM Memory Technology	LPDDR4
Connectivity Technology	WiMax
Smart Home Compatibility	Not Smart Home Compatible
Terminal Block and Header	Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch

Ready to buy?

Freenove Universal Breakout Board Compatible with Arduino Nano Micro Raspberry Pi Pico 1 2 W ESP32 ESP8266, Terminal Block Shield HAT with Pin Header, GPIO Status LED, 5 V 3.3 V is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

See live eBay listings →

*Price sourced from Amazon.com. Price and availability subject to change.