XRDS -RF 50 ohm BNC Cable 10FT
Bottom line: The XRDS -RF 50 ohm BNC Cable 10FT: Rated 50 ohm, matching most ham radios, antenna analyzers and test gear; main trade-off: RG58 loses more signal than RG8 or LMR-400 on long, high-frequency runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Rated 50 ohm, matching most ham radios, antenna analyzers and test gear
- ✓ Pure copper center conductor for low-resistance signal transfer
- ✓ Dual shielding (aluminum foil plus braided copper) cuts interference
- ✓ BNC male on both ends, ready for BNC jacks and attenuators
- ✓ Flexible PVC jacket over a PE dielectric, suited to tight or mobile setups
Cons
- ✗ RG58 loses more signal than RG8 or LMR-400 on long, high-frequency runs
- ✗ Fixed 10 ft length; no shorter or longer option in this listing
- ✗ Needs a BNC-to-PL-259 or SO-239 adapter for most CB radio jacks
- ✗ 50 ohm mismatches 75 ohm analog CCTV and SDI video gear
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for XRDS -RF 50 ohm BNC Cable 10FT, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "Rated 50 ohm, matching most ham radios, antenna analyzers and test gear"; the main trade-off is "RG58 loses more signal than RG8 or LMR-400 on long, high-frequency runs". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Cable type: RG58; Conductor material: pure copper; Connector material: nickel plated; Connector: BNC male to BNC male; Impedance: 50 ohm
- Application: The BNC coaxial cable is widely used for RF applications or flexible networks, ham radio, BNC attenuator, Portable Shortwave Radio, broadcast, video transmission and surveillance.
- Premium Build Quality: this BNC extension cable is designed with a solid copper core for excellent conductivity, polyethylene (PE) dielectric, and dual shielding of aluminum foil and braided copper to minimize signal loss and interference.
- The 50 ohm BNC RG58 coaxial cable has good anti-electromagnetic interference and softness, light weight, high temperature resistance, moisture resistance, corrosion resistance, etc.
- Durable and Flexible Design: the BNC patch cable Encased in a durable PVC jacket that protects against wear and tear while maintaining flexibility for installation in mobile or tight spaces.
Full Specifications
| Brand | XRDS -RF |
|---|---|
| Color | Black |
| Model | RG58-BNC-BNC-10FT--black |
| Frequency | 5000000000 hertz |
| Cable Type | RG 58 |
| Cable type | RG58; Conductor material: pure copper; Connector material: nickel plated; Connector: BNC male to BNC male; Impedance: 50 ohm |
| Unit Count | 10 Feet |
| Part Number | RG58-BNC-BNC-10FT--black |
| Connector Type | BNC |
| Number of Pins | 2 |
| Number of Items | 1 |
| Special Feature | light |
| Connector Gender | Male-to-Male |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Outdoor |
| Compatible Phone Models | No Compatible Phone Models |
| Recommended Uses For Product | Video Transmission |
| Other Special Features of the Product | light |
| Full listing title | XRDS -RF 50 ohm BNC Cable 10FT, BNC Male Extension RG58 Coax Cable for Antenna Analyzer, CB Radio, Security CCTV Camera |
Ready to buy?
XRDS -RF 50 ohm BNC Cable 10FT, BNC Male Extension RG58 Coax Cable for Antenna Analyzer, CB Radio, Security CCTV Camera is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Open WebUI — self-hosted ChatGPT for your local models
- How Companies Name Their Monitors: Brand-by-Brand Guide
- Best Gaming CPU Coolers Under $100 in 2026
- The $5M Sega Bet That Saved Nvidia — and Still Shapes GPU Launches
- Best Gaming Controllers for PC in 2026: 5 Top Picks
- Benchmarking Open Models for Tool-Use on a Budget RTX 3060 Rig
- Win98 SE on 1GB+ RAM: The vcache Fix Every Retro Builder Needs
- Sound Blaster AWE32 vs AWE64: Which Belongs in Your DOS Build?
- ESP32-S3 vs RP2350 vs Nordic nRF54L15: Which MCU for On-Device AI in 2026?
- Jellyfin on a Raspberry Pi 4 8GB: What It Can and Can't Transcode
- DeepCool AK620 vs Noctua NH-U12S for the Ryzen 7 5800X
- What Non-Gaming Tasks People Actually Run on Steam Deck
- Best Gaming Monitor for PS5 & High-Refresh PC Gaming (2026)
- AIO vs Air on a Ryzen 7 5800X: Corsair ML240L vs Noctua NH-U12S
- Best GPU for Local LLMs Under $350: Why the RTX 3060 12GB Still Wins
- Open WebUI + Ollama on an RTX 3060: The Self-Hosted ChatGPT Alternative for 2026
- GeForce 3 Ti 500 Build Guide: Period-Correct Win98 SE Rig for 2001-Era Gaming
- Cheapest 1440p GPU in 2026: Budget Buying Guide
- Raspberry Pi OS Moves to the Linux 6.18 LTS Kernel With an Updated LabWC Compositor
- Ryzen 5 5600X vs Ryzen 5 5600G for CPU-Only Gemma 3 12B
- Hyperscalers May Soon Outrun Their Cash Flow on AI Buildout
- Crucial BX500 vs Samsung 870 EVO for Budget & Retro Builds
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 3090
- Best GPU for Forza Horizon 6 at 1440p in 2026 (Without Breaking the Bank)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090