Fasgear 16pin(12+4) GPU Power Cable, White, 70cm
Bottom line: The Fasgear 16pin GPU Power Cable: 70cm length reaches behind the tray vs the 10cm stock lead; main trade-off: full-modular PSUs only, no semi- or non-modular support.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 70cm length reaches behind the tray vs the 10cm stock lead
- ✓ 16AWG tinned copper instead of the usual 18AWG wire
- ✓ Rated to 600W output over a single PCIe 5.1 cable
- ✓ Four clear acrylic combs included for flat cable runs
- ✓ Covers RTX 5090 through 3090 Ti on one 12+4 connector
Cons
- ✗ Full-modular PSUs only, no semi- or non-modular support
- ✗ Requires a native 12VHPWR port on your PSU already
- ✗ Incompatible with 12-pin RTX 3090 and 8-pin RTX 4070 cards
- ✗ White sleeving only, no color match for dark builds
Manufacturer description
The Fasgear 16-pin (12+4) GPU power cable is a single-cable 12VHPWR to 12VHPWR run built for full-modular power supplies that already have a native 12VHPWR port. At 70cm, it replaces the stubby 10cm factory lead so you can route power behind the motherboard tray instead of coiling slack in front of the card. Fasgear builds it to the PCIe 5.1 spec with 16AWG tinned copper conductors rather than the more common 18AWG, which the brand credits for steadier voltage delivery and support for up to 600W of output. The 12V-2x6 plug uses alloy copper contacts with tinned plating to resist oxidation…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Fasgear 16pin GPU Power Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "70cm length reaches behind the tray vs the 10cm stock lead"; the main trade-off is "Full-modular PSUs only, no semi- or non-modular support". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this work with my RTX 5090?
Yes. Fasgear lists the RTX 5090, 5080, 5070 Ti and 5070 among supported cards, along with the 4090, 4080, 4070 Ti and 3090 Ti. Your GPU needs a 12+4-pin female connector.
Do I need a specific power supply for this cable?
Yes, two conditions. Your PSU must be full modular, and it must have a native 12VHPWR output port. Semi-modular and non-modular units are not supported, since there is no port to plug into.
Does it work with the original 12-pin RTX 3090?
No. Fasgear states this cable does not fit 12-pin RTX 3090 cards or 8-pin GPUs such as the 8-pin RTX 4070. Only 12+4-pin cards including the 3090 Ti and the RTX 40 and 50 series.
How much power can it actually deliver?
Up to 600W. Fasgear uses 16AWG tinned copper wire rather than the standard 18AWG, plus a 12V-2x6 plug with alloy copper tinned contacts, which it credits for steadier voltage under load.
Is 70cm long enough for a full-tower cable route?
70cm (2.3ft) covers the behind-the-tray route in most mid and full towers, versus the roughly 10cm factory adapter. Four transparent acrylic combs are included to keep the sleeved run tidy.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Notice Before Shopping】To order a correct 12VHPWR power cable for your PSU and GPU, please make sure your PSU has the 12VHPWR ports. And we recommend you had better confirm the RTX 5090 5080 5070 5070Ti 4090 4080 3090ti 4070Ti GPU's requirement of the output wattage of PSU. This 12VHPWR GPU power cable is suitable for Full modular PSU only, not for semi-modular / non-modular power supplies
- 【RTX 4090 4080 3090Ti 4070Ti & 50 Series】Fasgear PCI-Express 5.1 GPU power cable is made for GeForce RTX 5090 5080 5070 5070Ti 3090Ti 4070Ti 4080 4090 Graphics Cards. It is a PCIe 5.1 12VHPWR to 12VHPWR power cable. PCI-E 5.1 GPU will be powered from modular power supply through only a single 16-pin PCIe 5.1 power cable simply.【Note】This GPU power cable is not suitable for 12pin GeForce RTX 3090 Series GPU. Only support 12+4pin female GPU like RTX 3090Ti, RTX 40 Series and RTX 50 Series
- 【Compatible for PSU with 16pin (12+4) 12VHPWR Plug】Fasgear PCI-Express 5.1 power cable simple work well. It is compatible with the full Modular Power Supply with 12VHPWR power ports (Such as GIGA-BYTE GP-UD1000GM PG5). Only one 16pin power cable is needed to power the GPU from PSU directly. One cable, simple work well and good for tidy. Get Ready for the future of power delivery
- 【16AWG Copper Wire & Up to 600W Output】Fasgear PCI-Express 5.1 graphics card power cable supports up to 600W output since it contains 16AWG tinned copper wire and 12V-2x6 plug made of alloy copper and tinned material. Compared with the standard 18AWG power cord, this updated 16AWG tinned copper wire can bring stable voltage transmission and higher power output. Meanwhile, this tinned copper can prevent oxidation
- 【Neat and Tidy】Fasgear 12VHPWR 16-pin power cable is in length 70cm/2.3ft, compared with the original 10cm power cable, can make your DIY computer system clean and tidy. With 4 transparent cable comb acrylic clips, it is convenient for you to manage this sleeved cable cord. Thus, this 12V-2x6 GPU cable can make the appearance of the computer system more beautiful
- 【Note】This 12V-2x6 GPU sleeved power cable is not compatible with the GPU with 12pin or 8pin power connector, such as GeForce RTX 3090 Series and 8pin RTX 4070 GPU, but compatible with the 4070 GPU with 16pin power connector. You can contact us via Amazon message regarding the compatibility of this cable.
Full Specifications
| Brand | Fasgear |
|---|---|
| Color | White |
| Wattage | 600 watts |
| Plug Type | 16-pin (12+4) 12VHPWR |
| Item Length | 70 centimeters |
| Plug Format | 16-pin (12+4) 12VHPWR |
| Model Number | FG-16PM01-585 |
| Input Current | 50 A |
| Mfr Part Number | FG-12VHPWR |
| Connector Gender | Male-to-Male |
| Special Features | 12v-2x6 Cable, 600w, 16awg tinned copper, braided, cable combs, Compatible with ATX 3.1/3.0 PSU |
| Indoor Outdoor Usage | Indoor |
| Power Cord Prong Count | 16 |
| Ethernet Cable Category | Cat 1 |
Ready to buy?
Fasgear 16pin(12+4) GPU Power Cable, White, 70cm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Build a 2001 GeForce3 + Win98 SE Gaming Rig in 2026: Parts and Gotchas
- Linux 7.3: 'Flatten the Pick' Scheduler Gains for Gaming
- Best GPU for Local LLMs in 2026: Why the RTX 3060 12GB Still Wins on Value
- Raspberry Pi 4 8GB as a 2026 Home Server: What Actually Runs Well
- Best GPU for Llama 3.1 70B (2026)
- How to Make Steam Deck Intros Last Longer (2026)
- Build a Retro Emulation Cabinet Brain on a Pi 4 8GB in 2026
- CompactFlash as a Win98 Boot Drive: Transcend CF133 + IDE Adapter Walkthrough
- Best SATA SSD for Gaming and Game-Library Storage in 2026
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- Sound Blaster X G6 on a Windows XP Retro Gaming PC: Worth It?
- How to run Llama 3.1 8B on Apple M4 Pro (2026)
- Strix Halo Gaming Benchmarks: What AMD's APU Can Really Do
- Best SSDs for a Raspberry Pi homelab NAS in 2026
- A 4B Local Coding Agent That Hits 87%: Does It Run on a 3060?
- Step 3.7 Flash vs Gemma 4 12B: Which Local Model Wins on a 12GB GPU?
- Voodoo 5 6000 Lab Method: Two Motherboards, One Dead BIOS
- Sound BlasterX G6 for Retro PC Gaming Audio: An External Card for Win98/XP and DOSBox Builds
- Best Budget Streaming Starter Kit for 2026 (Under $200)
- vLLM on Windows in 2026: What Actually Works on a 12GB Card
- KOORUI vs Samsung Odyssey: Best 27-inch 4K Gaming Monitor in 2026
- Chrome Using Too Much RAM? Fixes + Hardware Upgrades
- Kingston A400 960GB vs Crucial BX500 1TB for a PS4 Pro SSD Upgrade
- Continuous Blood Pressure Monitoring Without a Cuff in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090