DC 9V 2A Guitar Pedal Power Supply (10mA -2000mA) Center Negative
Bottom line: The pigtone DC 9V 2A Guitar Pedal Power Supply Center Negative: 2000mA max output covers pedals drawing anywhere from 10mA to 2A; main trade-off: single 9V output; daisy-chained pedals share a ground, not isolated.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 2000mA max output covers pedals drawing anywhere from 10mA to 2A
- ✓ 1-to-8 daisy chain cable runs up to eight pedals from one adapter
- ✓ Universal 100-240V AC, 50/60Hz input works on most mains supplies
- ✓ Included reverse polarity cable adds a center-positive option
- ✓ Magnetic ring on the lead plus noise-reduction circuitry to cut hum
Cons
- ✗ Single 9V output; daisy-chained pedals share a ground, not isolated
- ✗ No 12V or 18V option for pedals that need higher voltage
- ✗ Wall-adapter form factor, not a pedalboard-mountable power brick
- ✗ Keyboards must accept 9V center-negative 5.5x2.1mm; check first
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for pigtone DC 9V 2A Guitar Pedal Power Supply Center Negative, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "2000mA max output covers pedals drawing anywhere from 10mA to 2A"; the main trade-off is "Single 9V output; daisy-chained pedals share a ground, not isolated". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Input: AC 100V-240V, 50/60 Hz
- Output: DC 9V2A (10-2000mA) MAX: 2000mA Center Negative(-), External Positive(+), DC Plug Size Of 5.5x2.1mm
- This product is compatible with guitar pedals with currents ranging from 10mA to 2000mA,paired with a 1TO8 WAY daisy chain cable, it can simultaneously supply power to 8 guitar pedals
- Paired with 1 battery cable, 2 straight heads, and 1 bent reverse polarity cable, you can obtain an independent internal positive and external negative power supply through the reverse polarity cable
- Intelligent and professional integrated circuit chips,equipped with noise reduction and isolation safety protection performance,the magnetic ring at the end of the adapter cable can further reduce noise
- Suitable for most brands of guitar pedals, and can also provide power to keyboards
Full Specifications
| Brand | pigtone |
|---|---|
| Color | Black |
| Input | AC 100V-240V, 50/60 Hz |
| Output | DC 9V2A (10-2000mA) MAX: 2000mA Center Negative(-), External Positive(+), DC Plug Size Of 5.5x2.1mm |
| Current | AC/DC |
| Voltage | 9 volts |
| Wattage | 18 watts |
| Amperage | 2000 milliamps |
| Plug Type | Type A - US style |
| Model Name | 9V2A+1TO8+Cable |
| Power Plug | Type A - 2 pin (North American) |
| Unit Count | 1 Count |
| Form Factor | Adapter with Daisy Chain |
| Model Number | 9V2A+1TO8+Cable |
| Power Source | Power Adapter |
| Input Voltage | 120 volts |
| Mounting Type | Tabletop Mount |
| Built-In Media | 1 x 9V 2A Pedal Power Supply adapter, 1 x 8 ways daisy chain, 1 x Reverse polarity cable elbow, 1 x Battery clip cables, 2 x Reverse polarity cable straight |
| Connector Type | DC Plug Size Of 5.5x2.1mm |
| Output Current | 2000 milliamps |
Ready to buy?
DC 9V 2A Guitar Pedal Power Supply (10mA -2000mA) Center Negative is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Handheld Gaming PC Sale: Best 2026 Deals to Buy Now
- RTX 3060 12GB vs Arc B580 12GB for Local LLMs in 2026
- Transcend CF133 CompactFlash as a Windows 98 Boot Drive: Setup & Gotchas
- Corsair LL120 RGB vs Noctua NH-U12S: Cooling a 5800X for All-Day Gaming
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- Do You Even Need a Graphics Card? Ryzen 5 5600G iGPU vs RTX 3060 for 1080p
- Run Text-to-SQL Locally on a 12GB GPU After Gemini-SQL2
- RetroPie on a Raspberry Pi 4 8GB: The Definitive 2026 Emulation Build
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic 2026
- Raspberry Pi 4 8GB Homelab in 2026: Jellyfin, Pi-hole and Home Assistant on One Board
- Microsoft Mirage and Persistent-Memory Video Gen: How Much VRAM You Actually Need
- AMD Ryzen AI Halo vs NVIDIA DGX Spark — or Just an RTX 3060?
- Budget 4K QD-Mini LED Gaming Monitors Hit New Lows in 2026
- Build an Always-On Raspberry Pi Zero W Project: 24/7 FM Radio and More
- Running a 1-Trillion-Parameter LLM on 768GB of Cheap Optane
- ChatGPT Full-Duplex Voice: What Real-Time Speech Needs on Your Desk
- CompactFlash as Your IDE Hard Drive: A Silent, Reliable Retro PC Boot Disk
- Claude Sonnet 5 Closes the Opus Gap: When Local Still Wins
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
- Sound Blaster Audigy 2 ZS in 2026: The Last Great Win98/XP Sound Card Install Guide
- Best GPU for Ryzen 7 9800X3D in 2026: Pairing Guide
- Quietest AM4 CPU Cooler in 2026: Noctua NH-U12S vs DeepCool AK620 vs AC Infinity
- Intel llm-scaler-vllm PV 1.4 Adds Arc Pro B70 Support: What Local-LLM Builders Get
- Ryzen AI Max+ 'Gorgon Halo' 192GB vs RTX 3060 12GB for Local LLMs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090