monTEK Single Monitor Wall Mount
Status: monTEK Single Monitor Wall Mount: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The monTEK Single Monitor Wall Mount: Fits 17-49 inch curved and ultrawide monitors with 75x75 or 100x100mm VESA; main trade-off: not for drywall alone; needs wood studs, brick or concrete.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:
Similar: Single Monitor Arm for 17-49 Inch Ultrawide… — $56.99 on Amazon as of 2026-10-06 16:27 UTC (price may vary).
Similar: ErGear 17 to 49 inches Single Monitor Mount for… — $39.99 on Amazon as of 2026-10-07 00:16 UTC (price may vary).
Similar: monTEK Heavy-Duty Single Monitor Arm for 17-57… — $84.99 on Amazon as of 2026-10-06 16:24 UTC (price may vary).
Pros & Cons
Pros
- ✓ Fits 17-49 inch curved and ultrawide monitors with 75x75 or 100x100mm VESA
- ✓ Gas spring arm rated for monitors from 4.4 to 44 lbs
- ✓ +75/-75 degree tilt, +/-90 degree swivel and 180 degree screen rotation
- ✓ Extends up to 27.4 in. and folds back to 5.2 in. from the wall
- ✓ Built-in cable management plus a quick-release VESA plate
Cons
- ✗ Not for drywall alone; needs wood studs, brick or concrete
- ✗ Only 75x75 and 100x100mm VESA; other patterns need an adapter you supply
- ✗ Height adjustment tops out at 10.63 in. of travel
- ✗ Monitors under 4.4 lbs fall below the gas spring's rated range
SpecPicks Verdict
SpecPicks scored monTEK Single Monitor Wall Mount using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. monTEK's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Universal Compatibility】monTEK monitor wall mount fits 17 to 49 inch computer screens. Compatible with VESA 75x75mm and 100x100mm mounting holes. Please ensure your monitor has compatible VESA holes—if not, you will need to prepare your own VESA mount adapter (not included)
- 【Upgraded Construction】The single monitor arm is constructed from high-quality steel and aluminum for durability. It supports monitors weighing from 4.4 to 44 lbs, effectively reducing wobbling during use and keep the screen stable. The upgraded spring arm with 360°rotation makes adjustment easier and smoother, giving you greater flexibility to position your monitor exactly as you need
- 【Full Motion Adjustments】Enjoy unmatched flexibility with +75° to -75° tilt, ±90° swivel, 180° screen rotation. When not in use, the arm can be retracted close to the wall of only 5.2". This wall mount monitor arm extends up to 27.4" with a 10.63" height adjustment range, making it easy to find a more comfortable and ergonomic viewing angle—perfect for long hours of work or gaming
- 【Maximize Your Desk Space】Mount your monitor to the wall and instantly free up your valuable desk space. The monitor mount has a classic look that fits in any environment, while the integrated cable management system keeps wires organized and your workspace neat and tidy. Whether you're working, watching TV, live streaming, this monitor wall mount brings both style and functionality to your setup
- 【Easy Installation】Designed for wood studs, brick, and concrete walls (Note: Please do not mount to drywall alone). The quick-release VESA plate makes installation effortless, allowing you to set up this monitor wall mount within 10 minutes. Ideal for use in office, home, studio, gaming setup, and even RVs, which is a multifunctional tool to enhance your efficiency and productivity
Full Specifications
| Brand | monTEK |
|---|---|
| Color | White |
| Material | Steel, Aluminum, Plastic |
| Unit Count | 1 Count |
| Model Number | MA1001WWH-S |
| Mounting Type | Wall Mount |
| Movement Type | Tilt, Articulating, Swivel, Rotate |
| Mfr Part Number | MA1001WWH-S |
| Number of Items | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Steel, Aluminum, Plastic |
| Maximum Tilt Angle | 75 degrees |
| Maximum-Supported Screen Size | 49 inches |
| Minimum-Supported Screen Size | 17 inches |
| Full listing title | monTEK Single Monitor Wall Mount, Max 49" Gas Spring Arm, Heavy Duty, White | Fits 17–49" Curved & Ultrawide Monitors, Holds Up To 44 Lbs, Full Motion Gas Spring Wall Mount, Compatible With 75/100mm VESA |
Ready to buy?
Amazon shows no buyable offer for monTEK Single Monitor Wall Mount at the last check. A similar in-stock product is Single Monitor Arm for 17-49 Inch Ultrawide…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- How to run Llama 3.1 8B on Apple M3 Ultra
- Reviving the LAN Party in 2026: Arcade Sticks, Classic Consoles, and Local Multiplayer
- LM Studio on an RTX 3060 12GB: Local-LLM Setup and tok/s in 2026
- When a Game Boy Clone Runs Too Fast: The Crystal-Swap Fix Behind a Viral Repair
- How to run DeepSeek-R1 32B on AMD Radeon RX 7900 XTX
- Have Qwen Said Anything About Further Qwen 3.6 Models?
- Add NVMe Boot and Active Cooling to a Raspberry Pi 5 in 2026
- NES Graphics Upgrade Mod Gains Community Traction
- Running Mistral's New OCR Model Locally on a 12GB GPU
- Best SSD for Steam Deck Storage Expansion (2026)
- Govee vs DAYBETTER vs KSIPZE: Best LED Strip for Desk and Monitor Bias Lighting
- ZOTAC vs MSI RTX 3060 12GB: Which Twin-Fan Card Should You Buy in 2026?
- Best Force-Feedback Racing Wheel for PC in 2026: G29 vs HORI vs Thrustmaster
- Best DualSense Controllers and Adapters for PC in 2026
- Crucial BX500 vs Samsung 870 EVO: Best Budget 1TB SATA SSD for Gaming in 2026
- Tencent Hy3 on an RTX 3060 12GB: Can a $300 GPU Run It?
- Cerebras Running GPT-5.4 and GPT-5.5 Internally: What the CFO's Slip Tells Us About Wafer-Scale Inference
- Running a 3dfx Voodoo5 5500 PCI in a Modern Board in 2026
- Raspberry Pi vs AMD GPUs for Local LLMs: What the Specs Show
- Best Raspberry Pi for a Retro Console Build in 2026: Pi 4 8GB vs Pi Zero 2 W
- Jellyfin on a Raspberry Pi 4 8GB in 2026: The 4K Transcode Reality Check
- Athlon 64 + Radeon 9800 Pro Windows XP Build (2026 Revival): CompactFlash-to-IDE Boot Guide
- Best Gaming Monitor for 2026: 5 Picks from 1440p to 4K
- What Happened to the LLM Training Data Shortage?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090