Amazon Renewed Aiper Scuba S1 Robotic Pool Cleaner
Bottom line: The Amazon Renewed Aiper Scuba S1 Robotic Pool Cleaner: 4500 GPH suction pulls leaves, silt, and fine debris in a single pass; main trade-off: renewed unit, so cosmetic wear and prior use are expected.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 4500 GPH suction pulls leaves, silt, and fine debris in a single pass
- ✓ Four modes: Auto, Wall, Waterline, and Eco for daily or deep cleaning
- ✓ Up to 150 minutes runtime covers pools up to 1,600 sq ft
- ✓ Wall-climbing traction scrubs floor, walls, and waterline, not just the floor
- ✓ Eco mode runs a 45-minute cycle every 48 hours to cut power draw
Cons
- ✗ Renewed unit, so cosmetic wear and prior use are expected
- ✗ Cordless design caps each session at 150 minutes before recharging
- ✗ Sized for medium to large inground pools, not above-ground or odd shapes
- ✗ Renewed listings carry different return and warranty terms than new stock
SpecPicks Verdict
SpecPicks scored Amazon Renewed Aiper Scuba S1 Robotic Pool Cleaner using a rating × review-volume × price-fit model applied to published specs and reviews across the retro consoles category. Amazon Renewed's retro consoles lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro consoles of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Powerful 4500GPH Suction: Engineered with a commanding 4500GPH suction flow, Scuba S1 robotic pool cleaner removes leaves, silt, and ultra-fine debris in one efficient pass. Ideal for rapid deep cleaning, keeping your pool consistently clean and inviting
- Four Cleaning Modes: Switch between Auto, Wall, Waterline, and Eco Mode to tackle any cleaning task. Whether you need full-coverage deep cleaning or light daily upkeep, this pool cleaner for inground pools adapts instantly—delivering the ideal clean every time
- Eco-Friendly Cleaning: In Eco mode, Scuba S1 pool cleaner performs a 45-minute light cleaning every 48 hours, using less energy while keeping water crystal clear. With up to 150 minutes runtime and a 1,600 sq. ft. coverage, it’s ideal for medium to large inground pools
- Smart Wavepath Navigation 2.0: With enhanced Smart Wavepath Navigation 2.0, this pool vacuum robot scans your pool layout and charts the most efficient path forward. By reducing overlap and maximizing movement efficiency, it delivers full-pool cleaning in less time
- Wall & Waterline Cleaning: Combining powerful wall-climbing traction with an upgraded high-density brushing system, this robot pool cleaner delivers a full-surface clean—scrubbing and vacuuming the pool floor, walls, and waterline with maximum efficiency
Full Specifications
| Brand | AIPER |
|---|---|
| Color | White |
| Capacity | 3.5 liters |
| Material | Plastic |
| Model Name | Scuba S1-RV |
| Model Year | 2024 |
| Unit Count | 1 Count |
| Model Number | Scuba S1-RV |
| Power Source | Battery Powered |
| Compatibility | Switch |
| Material Type | Plastic |
| Warranty Type | 1 year |
| Battery Weight | 735 g |
| Control Method | App |
| Installation Type | robotic |
| Battery Description | Lithium-Ion |
| Number of Batteries | 1 Nonstandard Battery batteries required. (included) |
| Manufacturer Part Number | Scuba S1-RV |
| Item Dimensions L x W x H | 15.3"L x 8.7"W x 17.5"H |
| Number of Lithium-ion Cells | 12 |
| Full listing title | Aiper Scuba S1 Robotic Pool Cleaner, Wall & Waterline Cleaning, Cordless Pool Robot with 4 Modes, Smarter Navigation with High-Precision Sensors(Renewed) |
Ready to buy?
Aiper Scuba S1 Robotic Pool Cleaner, Wall & Waterline Cleaning, Cordless Pool Robot with 4 Modes, Smarter Navigation with High-Precision Sensors(Renewed) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Can a Raspberry Pi 4 8GB Run a Local LLM in 2026? Realistic tok/s
- Best Budget SSDs for Gaming PCs and Consoles in 2026
- Best Streaming Gear for New Creators in 2026
- Home Assistant on a Raspberry Pi 4 8GB: 2026 Smart-Home Hub Build
- Best CPU Cooler for Ryzen 7 5800X Overclocking (2026)
- Pushing a 6GB VRAM Laptop to Its Limits With Qwen3.6-35B-A3B
- CompactFlash to IDE Adapter Workflow: Imaging, Cloning, and Reviving Win98 Drives in 2026
- Asus ROG Harpe II Extreme: A 24K-Gold, 65K-Sensor Gaming Mouse
- Best Budget Gaming PC Parts in 2026: A 5-Pick Build List
- RTX 5090 AI Build Guide: CPU, RAM, PSU & Cooling for Local Inference
- Inkling 975B: Thinking Machines' Open-Weight Speech Model, Explained
- Voodoo5 5500 PCI Boots on Modern ASUS P8Z77-V Pro — A Look at Retro GPUs in 2026 Boards
- Logitech G29 vs HORI Force Feedback Wheel: Which Entry Sim Racing Wheel Wins?
- Noctua-Style Raspberry Pi 5 NAS Build Goes Viral — What Pi 4 Owners Can Borrow
- Sound Blaster X G6 on a Win98 + Voodoo3 Build: Period-Correct Audio That Beats On-Board
- Open-Source Linux Driver Lands for the ASUS ZenVision Lid OLED
- Raspberry Pi Locator Shuts Down in July: Where to Buy a Pi Now
- Gemma 4 12B Speech-to-Text on an RTX 3060 12GB: Local Transcription tok/s
- Gemini API Adds MCP + Background Execution: Build a Local Agent Host
- Is the RTX 3060 12GB Still Worth It for 1080p Gaming in 2026?
- Best AM4 CPU for Streaming While Gaming: 5600G vs 5700X vs 5800X
- Best Raspberry Pi Alternatives 2026: 5 SBCs After the Price Hikes
- Best PC Gaming Peripherals in 2026: 5 Picks for Keyboard, Audio, and Control
- Flux.2-Klein Pipeline: Real-Time Webcam AI at 30 FPS
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090