Gtziqa 1-to-3 ARGB Splitter Cable
Bottom line: Per its Amazon listing, the Gtziqa 1-to-3 ARGB Splitter Cable: ARGB cable length: 30 cm / 11.8 inches; notice: ARGB cables do not support 4-pin 12V RGB connectors.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ ARGB cable length: 30 cm / 11.8 inches
- ✓ Notice: ARGB cables do not support 4-pin 12V RGB connectors
- ✓ Backed by Gtziqa's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Product Name: 2 piece extension cordColor: blackMaterial: plasticDimensions: 30 cmPackaging: 2 piece extension cord
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Gtziqa 1-to-3 ARGB Splitter Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Package Includes: Includes 2 pcs 1-to-3 ARGB splitter cables, 5V 3-pin, 8 pcs 3-pin male connectors. ARGB cable length: 30 cm / 11.8 inches
- Function: These 1-to-3 5V 3-pin addressable RGB splitter extension cables can be used to extend and connect addressable RGB LED strips or 5V PC fans on the motherboard's +5V 3-pin ARGB header
- Application: Addressable RGB - ARGB splitter extension cable for 5050/3528 addressable RGB LED strips or RGB fans
- Easy to Install: The ARGB cable is equipped with a male connector, no soldering required, no tools required, saving time, convenient and practical. Make sure the arrow points correctly, plug and play
- Notice: ARGB cables do not support 4-pin 12V RGB connectors. Our ARGB extension cable only supports 3-pin 5V addressable RGB motherboard connectors
Full Specifications
| Brand | Gtziqa |
|---|---|
| Color | Black |
| Model | 5269QZTI8553 |
| Notice | ARGB cables do not support 4-pin 12V RGB connectors. Our ARGB extension cable only supports 3-pin 5V addressable RGB motherboard connectors |
| Cable Type | Addressable RGB |
| Unit Count | 2 Count |
| Application | Addressable RGB - ARGB splitter extension cable for 5050/3528 addressable RGB LED strips or RGB fans |
| Item Length | 11.8 inches |
| Part Number | 5269OJMV7134 |
| Compatibility | PC |
| Connector Type | 3 Pin |
| Number of Pins | 3 |
| Maximum Voltage | 5 volts_of_direct_current |
| Number of Items | 2 |
| Special Feature | Low Voltage |
| Connector Gender | Female-to-Female |
| Package Includes | Includes 2 pcs 1-to-3 ARGB splitter cables, 5V 3-pin, 8 pcs 3-pin male connectors. ARGB cable length: 30 cm / 11.8 inches |
| Compatible Devices | Addressable RGB LED Strip, 5V PC Fan |
| Indoor Outdoor Usage | Indoor |
| Warranty Description | 90 Days Manufacturer |
| Full listing title | 1-to-3 ARGB Splitter Cable, ARGB Extension Cables 2-Pack 5V 3 Pin Addressable RGB Extension Cable for Computer Chassis, CPU Heat Sink and 5V ARGB Fans, 2 Pack (11.8 Inches) |
Ready to buy?
1-to-3 ARGB Splitter Cable, ARGB Extension Cables 2-Pack 5V 3 Pin Addressable RGB Extension Cable for Computer Chassis, CPU Heat Sink and 5V ARGB Fans, 2 Pack (11.8 Inches) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Intel Core Ultra 5 250K Plus vs Ryzen 5 7600X3D: The Mid-Range Faceoff
- Best SATA SSDs Under $100 in 2026: 5 Picks for Boot Drives, Upgrades, and Retro PCs
- Horse Riding Game Controller for PC/Mac: Buy or Build
- Best Budget SSD for PC Builds in 2026
- Best Plug-and-Play Retro Console and Handheld to Buy in 2026: 5 Ranked Picks
- LLM-Driven Driver Install on Windows 98: How Claude Walks Voodoo + Sound Blaster Setup
- Sound BlasterX G6 for Retro DOS and Win98 Gaming: Does a Modern USB DAC Fix the EAX Era?
- GPU Deals for Local LLMs 2026: 12GB vs 16GB Cards
- GPT-5.6 Sol Ultra Shipped: Cloud vs Local Coding Rig
- Do you need a shifter for sim racing? Logitech G29 + Thrustmaster TH8A
- Ryzen 9800X3D vs 7800X3D: Best CPU for an RTX 5070 Build
- How to run Qwen 3 32B on Apple M4 (2026)
- Best Storage and IDE Adapters for Retro PC Builds in 2026
- Best CRT Monitor for Retro Gaming: 2026 Buying Guide
- Best SATA SSD for a PS4 Slim Storage Upgrade in 2026
- How We Use a Vision-LLM to Install Sound Blaster and Voodoo Drivers on Windows 98 — A Real Workflow From Our…
- Orange Pi 4 Pro 12GB vs Raspberry Pi 4 8GB for Small Local LLMs (2026)
- Intel Arc LLM Support: What Works in 2026
- Period-Correct 1999 Voodoo2 SLI + Pentium III LAN-Party Build Log (2026)
- GTX 1050 Ti in 2026: Performance, Use Cases, and Modern Comparisons
- Best Raspberry Pi Setup for Home Assistant in 2026
- Gemma 4 31B Abliterated on a Single RTX 3060 12GB: Quantization, VRAM, and Real Tok/s
- Sound Blaster in 2026: Using the Creative Sound BlasterX G6 on a Retro and Modern PC
- How to run Llama 3.1 70B on Apple M3 Ultra
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090