Shaking Tank
SHAKING TANK ARGB and PWM Fan hub
Bottom line: The SHAKING TANK ARGB and PWM Fan hub: 9 PWM and 9 ARGB ports on one board, so fewer splitter cables; main trade-off: only the Fan 1 port reports RPM to the motherboard.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 9 PWM and 9 ARGB ports on one board, so fewer splitter cables
- ✓ SATA power feed takes fan load off your motherboard header
- ✓ Syncs with ASUS Aura, GIGABYTE Fusion, MSI Mystic Light and ASRock Polychrome
- ✓ Magnetic backplane mounts on any steel case panel
- ✓ Adhesive Velcro strip included for non-magnetic surfaces
Cons
- ✗ Only the Fan 1 port reports RPM to the motherboard
- ✗ 3-pin fans run at full speed with no speed control
- ✗ No support for 12V 4-pin RGB devices
- ✗ Listing says 9 ports in one place and up to 8 fans in another
Manufacturer description
The Shaking Tank ARGB and PWM fan hub puts two splitters on one board. Fan speed control and addressable lighting both run through a single hub, so you don't need two tangles of Y-cables. The listing specifies 9 5V 3-pin ARGB ports and 9 4-pin PWM ports. The hub takes its power from a SATA connector, so your fans don't draw power from the motherboard header. Lighting sync works with the major motherboard ecosystems: ASUS Aura Sync, GIGABYTE Fusion, MSI Mystic Light and ASRock Polychrome. Connect the hub to your board's 5V 3-pin ARGB header and every attached fan follows the effect you set in…
SpecPicks Verdict
SpecPicks scored SHAKING TANK ARGB and PWM Fan hub using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. Shaking Tank's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How many fans can I connect to the Shaking Tank fan hub?
The listing gives 9 4-pin PWM ports and 9 5V 3-pin ARGB ports, but one feature bullet says it supports up to 8 fans. To be safe, plan for 8 ARGB-PWM fans, or check with the seller before you build.
Does this hub work with 12V 4-pin RGB fans?
No. The hub supports only 5V 3-pin addressable RGB (ARGB) devices. The manufacturer states that 4-pin 12V RGB devices are not supported.
Will my motherboard see the speed of every fan?
No. The motherboard controls speed through the PWM signal, but only the fan on the Fan 1 port reports RPM. The other fans follow the same PWM signal without reporting their speed.
Which RGB software ecosystems does it sync with?
It works with ASUS Aura Sync, GIGABYTE Fusion, MSI Mystic Light and ASRock Polychrome through your motherboard's 5V 3-pin ARGB header.
How do I mount it in a case without a steel panel?
The hub has a magnetic backplane for steel panels, and it comes with an adhesive Velcro strip. Use the strip to attach it to aluminum, glass or other non-magnetic surfaces.
Key Features
- SHAKING TANK Addressable rgb controller adopts 2 in 1 designs to connect PWM and ARGB cables, which can effectively sort out the layout of intricate wiring and make chassis wiring more convenient and concise.
- SHAKING TANK 2in1 PWM & ARGB fan hub contains 9 5v-3pin Aura SYNC Addressable RGB ports and 9 4pin PWM ports whiches simultaneously power maximum 9 ARGB-PWM fans in total to offer combo fan solution for PC building,SATA power maintains stable output even at full load.
- SHAKING TANK 2in1 PWM & ARGB fan hub widely supports Aura SYNC includes ASUS Aura, GIGABYTE Fusion, MSI Mystic Light and ASRock Polychrome to build a view stunning world of dancing ARGB Light with the interface providing stable continuous power for all your lighting components
- SHAKING TANK 2in1 PWM & ARGB fan hub makes a sturdy PWM & ARGB fan hub to optimize the cable management in the gaming case which can be placed almost anywhere of the case thanks to the magnetic backplane, meanwhile；It also comes with a piece of Adhesive Velcro, so that your case of any material has been easily applied
- The fan hub can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans or ARGB devices. NOTE: DOSE NOT SUPPORT 4-PIN RGB DEVICE.
- Fan speed can be adjusted by PWM signal from motherboard, only the speed of "Fan 1" can be read by the system. The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM.
Full Specifications
| Brand | Shaking Tank |
|---|---|
| Model | / |
| Voltage | 5 volts |
| Wattage | 2 watts |
| Material | Plastic |
| Unit Count | 1 Count |
| Noise Level | 19.6 db |
| Part Number | / |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Desktop |
| Included Components | ARGB&PWM fan hub |
| Power Connector Type | 4-Pin |
| Item Dimensions L x W x H | 5.71"L x 1.97"W x 0.59"H |
| Full listing title | SHAKING TANK ARGB and PWM Fan hub,9 Ports RGB Hub,1 to 9 Multi Way Magnetic backplane Splitter 5V/3PIN Case Fan Hub Adapter PWM ARGB Fan Black |
Ready to buy?
SHAKING TANK ARGB and PWM Fan hub,9 Ports RGB Hub,1 to 9 Multi Way Magnetic backplane Splitter 5V/3PIN Case Fan Hub Adapter PWM ARGB Fan Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- How to run Qwen 3 14B on NVIDIA GeForce RTX 5070
- Fable 5 as Manager: The Delegate-to-Sonnet-5 Cost Pattern
- Step 3.7 Flash Benchmarks: What You Can Actually Run on 12GB
- Home Assistant on a Raspberry Pi 4 8GB: 2026 Smart-Home Hub Build
- Steam Controller (2026) Scores 83/100 in Early Reviews
- Ryzen AI Max+ 395 LLM Inference: Specs, Bandwidth, Reality
- Best CPU for Streaming and Gaming Under $300 (2026)
- BIOS Says Resize BAR Is On But Nvidia Disagrees
- Add AI Vision to a Raspberry Pi 4 8GB with an AI Accelerator (2026)
- Open-Source NVIDIA NVK Vulkan Driver Adds DLSS Support: What It Means for RTX 3060 Owners
- Best 4K Monitor for PS5 and Xbox Series X Console Gaming in 2026
- Local LLM Inference on the RTX 3060 12GB: 2026 Quantization Playbook
- Sub-$300 4K Mini-LED Gaming Monitors Hit the Mainstream
- 768GB Intel Optane DIMM Rigs: Can Cheap Persistent Memory Really Run a 1T-Parameter LLM?
- AVX-512 Lifts Linux RAID Up to 41% on AMD Ryzen Chips
- RTX 4090 AI Server vs AMD Instinct: 2025 Guide
- Best Streaming & Content-Creation Starter Kit in 2026
- Building a Modern BYOC LAN Party Box: 8 Period-Correct Rigs for QuakeCon-Style Events in 2026
- Best 4K Gaming Monitors Under $600 in 2026
- Best PC Game Controller in 2026
- AI-Driven Driver Hunting on WinXP: Using Vision LLMs to Install Audigy 2 ZS Without Internet
- Optimizing LTX-2.3 Inference Speed on an RTX 3080 Ti
- Intel Arc AI Performance: What Works for Inference in 2026
- Run a Local Coding Agent on an RTX 3060 12GB (After Codex Went Autonomous)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090