Skip to main content
ARCTIC MX-7 (2 g) - Ultimate Performance Thermal Paste, Long Durability
ARCTIC

ARCTIC MX-7 (2 g) - Ultimate Performance Thermal Paste, Long Durability

Bottom line: The ARCTIC MX-7 (2 g) - Ultimate Performance Thermal Paste, Long ($6.89 on Amazon as of 2026-11-20 05:45 UTC): Dense, high-filler formula built for efficient CPU and GPU heat transfer; main trade-off: can't be spread by hand, so the pre-spread method won't work.

$6.89 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Dense, high-filler formula built for efficient CPU and GPU heat transfer
  • ✓ High cohesion resists pump-out, dry-out and bleeding across thermal cycles
  • ✓ Electrically non-conductive and non-capacitive, so overspill won't short components
  • ✓ Spreads under cooler pressure into a thin bond line without air bubbles
  • ✓ One paste for CPUs, GPUs, laptops and consoles during repaste jobs

Cons

  • ✗ Can't be spread by hand, so the pre-spread method won't work
  • ✗ Thick, very viscous paste can be harder to dispense cleanly
  • ✗ A 2 g pack covers only a few repastes, and large dies use more per job
  • ✗ Removing old paste properly needs MX Cleaner or similar, sold separately or bundled

Manufacturer description

ARCTIC MX-7 thermal paste is made for builders who want a repaste that stays put. This 2 g pack holds a dense, highly viscous compound with a high filler content, designed to move heat from your CPU or GPU die into the cooler. Many pastes break down over time. MX-7 has high cohesion, so it resists pump-out, dry-out and bleeding through repeated heat-up and cool-down cycles. You won't need to strip down a gaming rig, laptop or console as often to reapply paste, even if it runs hot for hours. Application may work differently than you expect. MX-7 is designed so that you can't spread it by…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for ARCTIC MX-7 (2 g) - Ultimate Performance Thermal Paste, Long…, so this read rests on the manufacturer's listed specs and the current price in the retro cpu coolers & fans category (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Dense, high-filler formula built for efficient CPU and GPU heat transfer"; the main trade-off is "Can't be spread by hand, so the pre-spread method won't work". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Do I need to spread ARCTIC MX-7 before mounting the cooler?

No. MX-7 is designed so that you can't spread it by hand. Apply it to the center of the chip and let the cooler's mounting pressure spread it into a thin bond line without air bubbles.

Is MX-7 safe to use on a GPU or laptop motherboard?

Yes. ARCTIC says MX-7 is electrically non-conductive and non-capacitive, so it won't cause short circuits or electrical discharge on CPUs, GPUs, laptops or consoles.

How often will I need to reapply MX-7?

MX-7 is made with high cohesion to resist pump-out, dry-out and bleeding through repeated thermal cycles, so you should need to reapply it less often. ARCTIC doesn't list a set interval, so check the product listing for current guidance.

Can I use MX-7 to repaste a game console?

Yes. ARCTIC lists consoles among the supported devices, along with CPUs, GPUs and laptops. Because the paste is non-conductive, a small amount squeezing past the die won't short nearby parts.

What should I use to remove the old thermal paste first?

ARCTIC recommends its MX Cleaner, which removes old thermal paste and prepares the contact surfaces. You can also buy it in a bundle with MX-7.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • NEXT-LEVEL THERMAL PERFORMANCE: MX-7 features a performance-optimized, dense, and highly viscous consistency. Its high filler content ensures exceptional heat transfer
  • LONG-TERM STABILITY: High cohesion prevents pump-out, dry-out, or bleeding even under repeated thermal cycles, ensuring long-lasting and consistent performance without the need for frequent reapplication
  • PERFECT APPLICATION: MX-7 cannot be spread manually by design. Its low adhesion allows the paste to distribute naturally under cooler pressure, forming a thin bond line without trapping air bubbles
  • SAFE FOR ALL DEVICES: MX-7 is electrically non-conductive and non-capacitive, making it completely safe for CPUs, GPUs, laptops, consoles, and other, no risk of short circuits or electrical discharge
  • EFFORTLESS CLEANING WITH MX CLEANER: Removes old thermal paste thoroughly, preparing contact surfaces for optimal performance. Also available as a convenient bundle with MX-7

Full Specifications

BrandARCTIC
Weight2 g
Cooling MethodThermal
Number of Items1
Number of Packs1
Compatible DevicesDesktop, Laptop, Graphic Cards, Gaming Console
Power Connector Type3-Pin
NEXT-LEVEL THERMAL PERFORMANCEMX-7 features a performance-optimized, dense, and highly viscous consistency. Its high filler content ensures exceptional heat transfer
Global Trade Identification Number04895265000867
EFFORTLESS CLEANING WITH MX CLEANERRemoves old thermal paste thoroughly, preparing contact surfaces for optimal performance. Also available as a convenient bundle with MX-7

Benchmark data for other processors

Ready to buy?

ARCTIC MX-7 (2 g) - Ultimate Performance Thermal Paste, Long Durability is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $6.89

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Retro CPU Coolers & Fans

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →