Skip to main content
Series 7 Silver Thermal Paste High Performance Heatsink Compound for CPU GPU LED, 10g Tub with Applicator
Protronix

Series 7 Silver Thermal Paste High Performance Heatsink Compound for CPU GPU LED, 10g Tub with Applicator

Bottom line: The Series 7 Silver Thermal Paste High Performance Heatsink Compound: Rated above 3.17 W/(m-K) thermal conductivity; main trade-off: rating above 3.17 W/(m-K) is modest for extreme overclocking.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Rated above 3.17 W/(m-K) thermal conductivity
  • ✓ Does not conduct electricity, so spill-over won't short nearby traces
  • ✓ 10g tub covers at least 50 small or 25 large CPU cores
  • ✓ Rated for long-term use from -22 to 464 F
  • ✓ Spreader and cleaning towelette included

Cons

  • ✗ Rating above 3.17 W/(m-K) is modest for extreme overclocking
  • ✗ Open tub is messier to dispense than a syringe
  • ✗ Spreading by hand takes practice to get a thin, even layer
  • ✗ Listing does not say how much silver the compound contains

Manufacturer description

Protronix Series 7 Silver Thermal Paste is a non-curing heatsink compound for CPUs, GPU coolers, LED chips and any other part that needs heat moved into a heatsink. It is rated above 3.17 W/(m-K) for thermal conductivity, and its long-term operating range runs from -22 to 464 F, so it handles warm GPU dies and hot LED arrays without trouble. The compound does not conduct electricity, so a bit of spill-over near exposed traces won't short a board. That matters when you are repasting an old graphics card or a socketed CPU from a retro build. It is also odorless, low in oil, non-volatile…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Series 7 Silver Thermal Paste High Performance Heatsink Compound, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Rated above 3.17 W/(m-K) thermal conductivity"; the main trade-off is "Rating above 3.17 W/(m-K) is modest for extreme overclocking". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Is Protronix Series 7 Silver thermal paste electrically conductive?

No. The manufacturer says the compound does not conduct electricity, so a little excess near the CPU or GPU die will not short components. It is also non-corrosive and flame retardant.

How many CPUs can I do with the 10g tub?

The manufacturer says one 10g tub covers at least 50 small CPU cores, 25 large CPU cores, or 8 to 15 heat plates, depending on surface size.

Can I use it on a GPU or LED heatsink as well as a CPU?

Yes. It is listed for heat sinks, CPU fans, GPU coolers, LED chips and other parts that need strong heat transfer into a heatsink.

What temperatures can this thermal compound handle?

It is rated for long-term operation from -22 F to 464 F, which covers normal CPU, GPU and LED operating temperatures.

Does the paste cure or harden, and what comes in the box?

It is non-curing, so it stays a paste rather than setting hard. The 10g tub comes with a spreader for applying it and a cleaning towelette for removing old compound. Check the product listing for current warranty terms.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Excellent Thermal Conductivity: >3.17W/(m-K)
  • Long-Term Operating Temperature: -22 - 464(F)
  • Odorless, low oil content, non-volatile, non-corrosive, non-toxic, flame retardant, not electrically conductive
  • Grease cleaner and applicator included
  • High stability and reliability

Full Specifications

BrandProtronix
ModelProtronix-PST-E
Weight10g
CPU SocketUniversal
Unit Count1.0 Count
Part NumberProtronix-PST-E
Mounting TypeChassis Mount
Cooler Heatsink MaterialCopper
Cooler Heatsink CompatibilityUniversal
Excellent Thermal Conductivity>3.17W/(m-K)

Benchmark data for other processors

Ready to buy?

Series 7 Silver Thermal Paste High Performance Heatsink Compound for CPU GPU LED, 10g Tub with Applicator is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Retro CPU Coolers & Fans

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →