Skip to main content
AMVR FC4A Newly Facial Interface, Face Pad with Ventilation-Design, Compatible with Meta/Oculus Quest 3 Accessories, for Halo Head Strap (NOT Compatible with Quest 3S)
AMVR

AMVR FC4A Newly Facial Interface

Bottom line: The AMVR FC4A Newly Facial Interface: Ventilation cutouts on top and both sides cut lens fogging mid-session; main trade-off: quest 3 only - explicitly not compatible with Quest 3S.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar vr headsets & accessories

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For PC VR headsets, synthesises manufacturer specs and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Ventilation cutouts on top and both sides cut lens fogging mid-session
  • ✓ Ships with two pads: PU leather plus ice silk for fan-equipped straps
  • ✓ Stepless knob height adjustment with three marked reference positions
  • ✓ Silicone nose guard seals light leakage for better contrast

Cons

  • ✗ Quest 3 only - explicitly not compatible with Quest 3S
  • ✗ Built around Halo-style head straps, not the stock Quest 3 strap
  • ✗ Curved forehead design means you cannot over-tighten it
  • ✗ Two-pad bundle adds cost over single-pad facial interfaces

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored AMVR FC4A Newly Facial Interface using a rating × review-volume × price-fit model applied to published specs and reviews across the vr headsets & accessories category. AMVR's vr headsets & accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for vr headsets & accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Designed for Q3 Halo Head Strap: The new AMVR facial interface compatible with Meta Quest 3 accessories is designed for Halo head strap. Especially suitable for head strap with fan. Not compatible with Quest 3s
  • Replacement PU Leather ＆ Ice Silk Pad: The ice silk padding works best with fan head strap. It‘s curved design at the forehead promotes airflow, so avoid over-tightening during wear, he widened tail end can balance facial pressure and effectively reduce indentations. Leather padding fits all usage scenarios and delivers superior comfort
  • Better ventilation effect: The upgraded facial interface has added ventilation openings at the top and on both sides. Effectively improve air circulation, reduce the fogging of lenses during VR games, and enhance your VR experience
  • Knob stepless adjustment: It supports stepless adjustment. You can find the most suitable position for yourself by adjusting the height. At the same time, there are three recommended heights on the bracket for your reference
  • Light-Blocking Nose Guard: Block out external light and fully immerse yourself in the virtual world. The soft, flexible silicone nose piece contours seamlessly to eliminate light leakage. Maximize your VR screen's color contrast and vibrancy for ultimate gameplay

Full Specifications

BrandAMVR
ColorBLACK
PlatformNot Machine Specific
Resolution1832 x 1920 per eye
Model NumberFC4A
Warranty TypeLimited
Built-In MediaFace Cover
Mfr Part NumberFC4A
Special FeatureFace pad ventilation design, suitable for halo head strap with fan, Knob stepless adjustment
Compatible DevicesCompatible with Meta Quest 3
Additional FeaturesFace pad ventilation design, suitable for halo head strap with fan, Knob stepless adjustment
Included ComponentsFace Cover
Warranty Description1 Year Manufacturer
Age Range DescriptionAdult
Age Range (Description)Adult
Connectivity TechnologyUSB
Specific Uses For ProductEnhance air circulation, keep your face dry and prevent the lens from fogging.
Display Maximum Resolution1832 x 1920 per eye
Display Resolution Maximum1832 pixels
Full listing titleAMVR FC4A Newly Facial Interface, Face Pad with Ventilation-Design, Compatible with Meta/Oculus Quest 3 Accessories, for Halo Head Strap (NOT Compatible with Quest 3S)

Ready to buy?

AMVR FC4A Newly Facial Interface, Face Pad with Ventilation-Design, Compatible with Meta/Oculus Quest 3 Accessories, for Halo Head Strap (NOT Compatible with Quest 3S) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related VR Headsets & Accessories

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
AMVR FC4A Newly Facial Interface, Face Pad with Ventilation-Design, Compatible with Meta/Oculus Quest 3 Accessories, for Halo Head Strap (NOT Compatible with Quest 3S)
View on Amazon →