MOOKEERF RG316 BNC Male to Male Cable
Bottom line: The MOOKEERF RG316 BNC Male to Male Cable: 50 ohm impedance matches ham radio, scope and signal generator BNC ports; main trade-off: 50 ohm only, not the 75 ohm used for SDI or composite video.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 50 ohm impedance matches ham radio, scope and signal generator BNC ports
- ✓ Silver-plated copper center conductor and braided shield
- ✓ FEP jacket is waterproof and flexible, rated for outdoor exposure
- ✓ 2.2in heat shrink at each connector guards against pull-out
- ✓ 25 ft run reaches from bench gear to a window or rooftop antenna
Cons
- ✗ 50 ohm only, not the 75 ohm used for SDI or composite video
- ✗ Thin RG316 loses more signal over 25 ft than thicker RG58 or RG8X
- ✗ Listing gives no frequency rating or attenuation-per-foot figure
- ✗ Male to male only; SMA, N-type or UHF gear needs adapters
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOOKEERF RG316 BNC Male to Male Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "50 ohm impedance matches ham radio, scope and signal generator BNC ports"; the main trade-off is "50 ohm only, not the 75 ohm used for SDI or composite video". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 50 ohm BNC Male to BNC Male Coaxial Cable (1PCS)
- RG316 Coaxial Cable -- Flexible and light weight, high temperature resistance and good anti-electromagnetic interference .
- Well Built Construction -- The inner conductor of this bnc coax cable is made of silver-plated copper,outer conductor made of silver-plated copper shielding braid,which could maximum protect the signal.Waterproof and flexible FEP jacket allows the bnc cable exposure in outdoor harsh environments.
- Stronger Connection -- The length of heat shrink tube that connect the rg316 cable and bnc connector is upgraded to 2.2",which can better protect the connector from falling off.
- Applications -- This bnc cable 50 ohm is widly used for bnc antennas,ham radio,two-way radio,network analyzer,modems,oscilloscopes,spectrum,surveillance,signal generators,attenuator and ect.
- Professional Produce -- MOOKEERF is a professional manufacturer of RF cable,all our cables are made to the highest standards.If you are not satisfied with any product, please don’t hesitate to contact us,we will serve you our best.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Bronze |
| Model | B0FWXG4659 |
| Cable Type | RG316 |
| Unit Count | 25 Feet |
| Item Length | 25 feet |
| Part Number | RG316 |
| Connector Type | RF Connector |
| Number of Items | 1 |
| Special Feature | radio-controlled |
| Connector Gender | Male-to-Male |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Outdoor |
| Compatible Phone Models | No Compatible Phone Models |
| Other Special Features of the Product | radio-controlled |
| Full listing title | RG316 BNC Male to Male Cable - 25FT BNC Cable 50 Ohm for Ham Radio, Network Analyzer, Modem, Oscilloscope, Signal Generator, Attenuator etc. |
Ready to buy?
RG316 BNC Male to Male Cable - 25FT BNC Cable 50 Ohm for Ham Radio, Network Analyzer, Modem, Oscilloscope, Signal Generator, Attenuator etc. is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- DeepSeek V4 vs Claude Opus 4.6: Local Inference Hardware for the Open-Weight Challenger
- Forza Horizon 6 on the Steam Deck: Settings, Frame Pacing, and the SSD Question
- Local LLM Agent Infrastructure: 2026 Hardware Guide
- Intel Arc B60 Stable Diffusion: Setup & Benchmarks 2025
- Best CPU for Local LLM Inference in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- Best Midrange GPU for 1440p Ultra Gaming in 2026
- AMD Ryzen 7 5800X3D Re-Review: DDR4's Last Gaming Champion in 2026
- Best 4K Gaming Monitors Under $500 in 2026
- How to run Qwen 3 32B on Apple M4 (2026)
- Console to Gaming PC: What Changes in 2025
- Best GPU for Llama 3.1 70B (2026)
- GLM-5.2 Review: Running the Top Open-Weights LLM on an RTX 3060
- Raspberry Pi OS Moves to Linux 6.18 LTS — Real Performance Gains
- What a $15 Raspberry Pi Zero W Can Still Do in 2026
- Is the RTX 3060 12GB Still Worth It for Gaming in 2026?
- MiniCPM5-1B: The 1B Model That Beats Reasoning Peers by Knowing When to Shut Up
- Intel Bartlett Lake vs i9-13900K: More Cores, Fewer Frames
- Best GPU for Llama 70B Local Inference in 2026: RTX 3060 12GB Dual vs RTX 3090 vs Gorgon Halo
- Renting AI Compute vs Running It Home: The RTX 3060 Math
- Best Raspberry Pi Alternative in 2025: Full Buying Guide
- Ryzen 5 5600G vs RTX 3060 12GB for Entry Local LLM Inference (2026)
- llama.cpp on a 12GB RTX 3060: llama-bench Setup and Measured tok/s
- Voodoo 3 3500 TV vs Voodoo 5 5500: Which Late-3dfx Card Should You Hunt For in 2026?
- 18 LLMs Benchmarked on OCR: Why Cheaper Models Often Win
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090