Tyenaza Converter Module, CF Card to 3.5 Inch Female 40pin IDE Sturdy Hard Disk Drive 5.0V / 3.3V (Dual use)
Bottom line: Per its Amazon listing, the Tyenaza Converter Module: 5.0V or 3.3V power supply.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Master/slave jumper: The front and back CF cards can be configured as master or slave
- ✓ Backed by Tyenaza's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Item Type: Converter ModuleMaterial: PCBInterface: 40 PinsCompliance with Standards: CF Specification Ver2.0, IDE/ATA-33SpecificationStandard IDE Interface Interface: True-IDE Mode, and Supports DMA-33 Transfer ModeSupport CF-I and CF-II Two Types of Cards: Also Support for IBM Micro Hard Disk with CF-II InterfacePackage List:1 x Converter Module
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Tyenaza Converter Module, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- The IDE interface is a 40pin female connector: this card can be directly inserted into the IDE socket
- CF card holder can be placed flexibly: single‑sided or double‑sided CF can be selected at will. 5.0V or 3.3V power supply
- 3 LED indicators: power (power LED), CF access (active LEd), whether the card is inserted (card detect LED)
- Master/slave jumper: The front and back CF cards can be configured as master or slave
- Use the CF card as a DOM: automatically supply power from the IDE's 20‑pin or external floppy drive power socket
Full Specifications
| Brand | Tyenaza |
|---|---|
| Connector Type | usb_2_0 |
| Number of Items | 1 |
| 3 LED indicators | power (power LED), CF access (active LEd), whether the card is inserted (card detect LED) |
| Compatible Devices | Laptop |
| Master/slave jumper | The front and back CF cards can be configured as master or slave |
| Warranty Description | manufacturer warranty for 90 day |
| Use the CF card as a DOM | automatically supply power from the IDE's 20‑pin or external floppy drive power socket |
| CF card holder can be placed flexibly | single‑sided or double‑sided CF can be selected at will. 5.0V or 3.3V power supply |
Ready to buy?
Tyenaza Converter Module, CF Card to 3.5 Inch Female 40pin IDE Sturdy Hard Disk Drive 5.0V / 3.3V (Dual use) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Raspberry Pi Alternative for Klipper (2025 Guide)
- Boot Windows 98 from CompactFlash: A Silent, Reliable CF-to-IDE Build
- Best Capture Device for Recording Retro Consoles and Old PCs in 2026
- Best Gaming Headset for PlayStation 5 Under $80 (2026)
- Best CPU Cooler for the Ryzen 7 5800X: Air vs AIO in 2026
- Running a Modern SATA SSD in a Windows XP Retro Gaming PC
- Radeon Pro W7900 48GB vs RTX A6000 48GB for Local 70B Inference (2026)
- MicroPython Now Runs on the Super Nintendo — Here's What That Means
- Moonshot AI Targets $30B: Can You Run a Kimi-Class Open Model on a 12GB GPU?
- 360mm vs 240mm AIO: Is the Bigger Radiator Worth It in 2026?
- Gemini API Adds MCP + Background Execution: Build a Local Agent Host
- Best RGB Lighting for a Gaming PC Desk: LED Strips and Case Fans Done Right
- Local AI and Gaming Setup Picks 2026: 5 Buys With Price Anchors
- Grok Imagine 1.5 Shipped 720p Video — Run Local Image/Video Gen Instead
- Black Friday Standing Desk & Monitor Arm Deals: 5 Picks
- Best SATA SSD for Gaming and Everyday Upgrades in 2026
- Adafruit's Cyberdeck Raspberry Pi Music Workstation Guide Lands
- Raspberry Pi 5 + Hailo-8 vs Jetson Orin Nano Super: Which Edge AI Box Wins for Vision Workloads?
- Build a Pi Zero W Handheld Retro Emulator in 2026: Full Parts List and Setup
- Matrox G400 MAX in 2026: Period-Correct Install, EMBM Showcase, and Pentium III Benchmarks
- How Many CPU Cores Does a Local-LLM Rig Actually Need?
- SATA/IDE to USB Adapters in 2026: FIDECO vs Unitek vs Vantec for Retro PC Data Recovery
- Qwen3.6-35B-A3B on an 8GB Laptop: What the Krasis Benchmark Means for Local Inference
- Best GPU for ComfyUI & Stable Diffusion Under $300 in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090