EZDIY-FAB UNIFAS ARGB 16-Pin 12VHPWR GPU Extension Cable for RTX 40/50 Series
Bottom line: Per its Amazon listing, the EZDIY-FAB UNIFAS ARGB 16-Pin 12VHPWR GPU Extension Cable ($39.99 on Amazon as of 2026-11-21 23:20 UTC, orderable but not in stock): required clearance: width ≥ 21.8 mm, depth ≤ 16.8 mm.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Required clearance: width ≥ 21.8 mm, depth ≤ 16.8 mm
- ✓ Backed by EZDIY-FAB's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for EZDIY-FAB UNIFAS ARGB 16-Pin 12VHPWR GPU Extension Cable, so this read rests on the manufacturer's listed specs and the current price in the rgb & lighting category (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【UNIFIED FLOW DESIGN】 Engineered to visually align with CPU AIO liquid cooler tubing, UNIFAS cables create clean, parallel lines that bring balance and symmetry to your PC’s interior for a truly cohesive build
- 【IMPORTANT FITMENT CHECK】Before purchase, ensure your GPU shroud allows the 16-pin connector to fully seat and click into place. Required clearance: width ≥ 21.8 mm, depth ≤ 16.8 mm. See banners for detailed guidance.
- 【UNIFAS 16-PIN STD & RVS VERSIONS】The UNIFAS 16-pin adapter is available in STD and RVS versions, both fully compatible with all 16-pin GPUs. Select the version that matches your GPU’s port orientation: GPU Type A (4-pin on lower edge) or GPU Type B (4-pin on top)—for optimal cable routing and the cleanest possible look.
- 【 Next-Gen 12V-2x6 Connector Standard 】Engineered for the future of high-performance gaming, our extension cable features the latest 12V-2x6 (PCIe 5.1) connector standard. This refined design ensures a more secure and stable connection than the original 12VHPWR, providing up to 600W of power delivery to NVIDIA GeForce RTX 40-series and 50-series GPUs without the risk of connector overheating.
- 【 Unified Design & Premium Finish 】Achieve a clutter-free, professional look with our unified cable design. Combining robust housing with premium metal fittings, it provides a secure, sophisticated connection that doubles as a polished aesthetic centerpiece.
- 【 Advanced 16AWG Tinned Copper Wiring 】 Stability is non-negotiable for high-TDP graphics cards. We utilize heavy-duty 16AWG tinned copper wires to minimize resistance and heat buildup. This thicker gauge ensures a consistent voltage flow under heavy gaming loads, maintaining peak performance while protecting your expensive hardware from power fluctuations.
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| GPU Series | NVIDIA RTX 40 Series |
| Model Name | EZDPR260-3 |
| Unit Count | 1.0 Count |
| Model Number | EZDPR260-3 |
| Compatibility | PC |
| Video Processor | NVIDIA |
| Compatible Devices | High-end Graphics Cards |
| Graphics Coprocessor | NVIDIA RTX 40/50 シリーズ |
| Graphics Card Interface | PCI-Express x16 |
| Graphics Processor Manufacturer | NVIDIA |
| Full listing title | EZDIY-FAB UNIFAS ARGB 16-Pin 12VHPWR GPU Extension Cable for RTX 40/50 Series, 16AWG 90° Right-Angle 12V-2x6 PCIe 5.1 PSU Extension Cable, 5V 3-Pin RGB Sync, Unified Cable Design, Reverse Type, White |
Ready to buy?
EZDIY-FAB UNIFAS ARGB 16-Pin 12VHPWR GPU Extension Cable for RTX 40/50 Series, 16AWG 90° Right-Angle 12V-2x6 PCIe 5.1 PSU Extension Cable, 5V 3-Pin RGB Sync, Unified Cable Design, Reverse Type, White is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Raspberry Pi for Klipper in 2026: Pi 4 8GB vs Alternatives
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Your Game Library (2026)
- Troubleshooting Local LLM Inference on Raspberry Pi 4 8GB and Pi 5: OOM, Swap, Quantization Crashes, and…
- Best GPU for 1440p 144Hz Esports in 2026: RTX 3060 Ventus Sweet Spot
- Local AI on Raspberry Pi 5: Sourced Benchmarks for Llama, Phi, and Gemma
- Raspberry Pi 4 vs Pi Zero W: Which Board for Your First Project?
- Imaging Vintage IDE Drives in 2026: A CompactFlash + USB Adapter Workflow
- Linux Now Boots on a Sega Genesis — Here's What That Actually Means
- Ryzen 7 5800X vs Ryzen 5 5600G for a Budget Local-AI Workstation
- HyperX QuadCast 2 vs Blue Yeti: Best USB Mic for Streaming and Podcasting in 2026
- Best $1000 Prime Day Gaming PC: RTX 5060 Ti + 32GB RAM
- Best Budget Gaming PC Parts in 2026: A 5-Pick Build List
- ROCm in 2026: Is AMD Finally a Real Local-LLM Option?
- Building a period-correct Windows 98 gaming rig in 2026
- Dual Radeon AI PRO R9700 Workstation: 64 GB Local LLM Build
- Best Budget 4K Gaming Monitor 2026: SANSUI 27" vs KOORUI QD-Mini LED vs ASUS TUF
- GPT-5.6 Sol Nearly Matches Fable 5 at a Third the Cost: The Local-Rig Angle
- GLM-5.2: The Open-Weights Model Built for Long-Horizon Agentic Tasks
- Best Retro Console Reissues to Buy in 2026
- Qwen 3.6 27B vs DeepSeek V4: Which Local Model Wins on a Single 5090?
- Anker's Thus Chip Claims 150x AI Boost: No Benchmarks Yet
- Ryzen 5 5600G APU for Local LLM Inference in 2026: What You Can Actually Run
- Matrox G400 MAX in 2026: Period-Correct Install, EMBM Showcase, and Pentium III Benchmarks
- Ryzen 7 5800X3D vs 5800X: Does 3D V-Cache Beat Raw Clocks for Gaming?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090