OverZyn 8.5 oz Electronic Contact Cleaner
Bottom line: The OverZyn 8.5 oz Electronic Contact Cleaner is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category, priced around $13.90 on Amazon as of 2026-11-21 23:21 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Before you buy
- Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for OverZyn 8.5 oz Electronic Contact Cleaner, so this read rests on the manufacturer's listed specs and the current price in the tools & maintenance category (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Significant Cleaning Effect: OverZyn Contact Cleaner Electronics dissolves rosin, flux, grease, water stains, and dust within seconds. The included anti-static and soft brushes agitate contaminants for thorough removal
- Quick Drying: Electronic Contact Cleaner evaporates within seconds, leaving no trace or residue. The surface is dry and clean, allowing circuit boards to be powered on immediately, avoiding the risk of short circuits or secondary contamination
- Instructions for Use: 1. Thoroughly clean the surface to remove dust, grease, and other contaminants. 2. Apply electrical contact cleaner generously to the stained area. 3. For stubborn stains, gently scrub with the anti-static brush. 4. Wipe away dissolved dirt with a lint-free cloth
- Powerful Decontamination Capacity: Our contact cleaner electronics removes both polar and non-polar contaminants in one pass, effectively protecting various component surfaces from potential damage during cleaning, ensuring reliable contact resistance and long-term stability
- Wide Applications: Electronic contact cleaner is suitable for potentiometers, relays, measuring instruments, motherboards, power supplies, sensors, and plug-type electrical connectors. One can replaces multiple specialized cleaners, making it an ideal cleaning choice for electronics manufacturing and maintenance
Full Specifications
| Size | 8.3 Fl Oz (Pack of 1) |
|---|---|
| Brand | OverZyn |
| Scent | no |
| Weight | 8.5 oz |
| Item Form | Aerosol |
| Unit Count | 8.3 Fluid Ounces |
| Item Volume | 1 Centiliters |
| Part Number | NZUS080 |
| Number of Items | 1 |
| Special Features | All Purpose |
| Material Features | Cruelty Free |
| Surface Recommendation | Copper |
| Contains Liquid Contents? | No |
| Specific Uses For Product | All Purpose |
| Full listing title | 8.5 oz Electronic Contact Cleaner, Contact Cleaner Electronics, Circuit Board cleaner, Quick-Drying, Primarily Used for Cleaning Printed Circuit Boards, Metal Parts, and Hardware |
Ready to buy?
8.5 oz Electronic Contact Cleaner, Contact Cleaner Electronics, Circuit Board cleaner, Quick-Drying, Primarily Used for Cleaning Printed Circuit Boards, Metal Parts, and Hardware is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- HiDream-O1-Image Debuts as Top Open-Weights Text-to-Image Model
- Raspberry Pi OS Moves to Linux 6.18 LTS — Real Performance Gains
- Best Workstation PC Parts on Amazon in 2026
- CompactFlash as an IDE Boot Drive: The Definitive Win98 Storage Guide
- Build a Jellyfin Media Server on a Raspberry Pi 4 8GB: Measured Perf
- Raspberry Pi 5 Local LLM Server: Best Models for 8GB RAM in 2026
- Rescue a Dying Vintage IDE Drive by Cloning It to CompactFlash
- 2026 Homelab Stack: OPNsense + Proxmox + TrueNAS + 10GbE
- Best CPU Cooler for Ryzen 7 5800X and 5700X in 2026
- Blue Yeti vs HyperX QuadCast 2: Best Budget Streaming Mic Setup in 2026
- Best Budget Streaming Starter Kit for Twitch & YouTube in 2026
- Forza Horizon 6 Runs Smooth on Steam Deck — the Dock-and-Settings Combo
- Qwen 3.6 27B on a 12GB RTX 3060: Which Quant Actually Fits?
- Best GPU for Running 27B-32B Local LLMs in 2026
- ASRock Arc B580 12GB vs RTX 3060 12GB for 1440p Gaming in 2026
- Claude Opus 4.8 Tops the Intelligence Index — How Close Can a $300 RTX 3060 Get Locally?
- Anthropic's Fable 5 Ban and Jailbreak: What It Means for Local-LLM Resilience
- RetroPie Handheld Build Guide 2026: Hardware & Setup
- Intel Arc A770 LLM Performance: Local Inference Guide
- Best Budget GPU for Local LLMs in 2026: RTX 3060 12GB Still Wins
- Mistral Seeks €3B: What a Bigger European Lab Means for Local Rigs
- Intel Core Ultra X7 Panther Lake Performance on Linux 7.1
- Building a Period-Correct Windows 98 Gaming PC in 2026: Parts, Pitfalls, and Driver Archaeology
- Qwen 3.6 35B GGUF: NTP vs MTP Quantization Explained
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090