TESmart DP KVM Switch 3 Monitors 2 Computers 8K@60Hz
Bottom line: Per its Amazon listing, the TESmart DP KVM Switch 3 Monitors 2 Computers 8K@60Hz: experience Triple 8K@60Hz vision with DP1.4; resolutions up to 8K (4320p)@60Hz: Resolutions up to 8K@60Hz are supported.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Experience Triple 8K@60Hz vision with DP1.4
- ✓ Resolutions up to 8K (4320p)@60Hz: Resolutions up to 8K@60Hz are supported
- ✓ Backed by TESmart's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for TESmart DP KVM Switch 3 Monitors 2 Computers 8K@60Hz, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Purpose-built for two DP 1.4 desktops and three DP 1.4 monitors, delivering a stable triple-monitor KVM solution. Designed without HDMI and USB-C inputs. For desktop+laptop setups, a direct USB-C to DP connection is recommended to minimize dock MST processing and power-related signal instability, or please explore TESmart USB-C+DP models (HDC202-P23, HDC203-PM24, HDC203-P24).
- Built for Broad Compatibility: This DisplayPort 1.4 KVM switch has undergone multiple brand-level tests during development, and our team continues to improve compatibility with third-party monitors, keyboards, and mice. If you experience issues with different device models, see the Troubleshooting Guide (PDF) under “Safety Documents” on this product page for more information.
- Experience Triple 8K@60Hz vision with DP1.4, enhanced by TESmart's pioneering EDID emulation technology. Enhanced with four technologies: G-Sync, FreeSync, FEC, and DSC
- Resolutions up to 8K (4320p)@60Hz: Resolutions up to 8K@60Hz are supported. It is backward compatible with 4K (2160p)@60Hz/120Hz/144Hz. DSC technology allows the transmission of 7680x4320@60Hz 4:4:4 and 3840x2160@144Hz resolutions
- EDID Emulators: With EDID emulators in each input port, your computers always receive the correct display information. Free you from the hassle of constantly adjusting display settings
- Ideal KVM for Gaming: Supports Dynamic HDR, including HDMI Dynamic HDR metadata, HDR10+, and Dolby Vision, providing higher dynamic range and color accuracy for more realistic display effects. It also supports Variable Refresh Rate (VRR), Fast Vactive (FVA), and Auto Low Latency Mode (ALLM), reducing screen tearing, stuttering, and input lag for a smoother experience
Full Specifications
| Brand | TESmart |
|---|---|
| Color | Black |
| Model | DKS203-M24-USBK1 |
| Weight | 1g |
| Wattage | 36 watts |
| Material | Metal |
| Terminal | Screw |
| Unit Count | 1 Count |
| Part Number | DKS203-M24-USBK1 |
| Switch Type | Push Button |
| Circuit Type | 1-way |
| Connectivity | USB-C |
| Contact Type | Normally Closed |
| Control Type | remote |
| Compatibility | Switch |
| Material Type | Metal |
| Mounting Type | Panel Mount |
| Connector Type | Plug In |
| Control Method | Push Button, Remote |
| Operation Mode | ON-OFF |
| Full listing title | TESmart DP KVM Switch 3 Monitors 2 Computers 8K@60Hz,USB 3.0 KVM Switch Triple Monitor 2 Computers DisplayPort 1.4, EDID, 1G Ethernet, Hotkey Switch, 4K@144Hz for Gaming&Home Office |
Ready to buy?
TESmart DP KVM Switch 3 Monitors 2 Computers 8K@60Hz,USB 3.0 KVM Switch Triple Monitor 2 Computers DisplayPort 1.4, EDID, 1G Ethernet, Hotkey Switch, 4K@144Hz for Gaming&Home Office is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Build a Budget Local-AI Rig in 2026: Ryzen 7 5800X + RTX 3060 12GB
- Raspberry Pi AI HAT+ 2025: TOPS, Price, Setup Guide
- Best Gaming Headsets and Streaming Mics for Console + PC (2026)
- Cooling a 24/7 Local LLM Rig: Air vs 120mm AIO vs 240mm AIO
- Self-Host Immich on a Ryzen 5 5600G Mini-PC: Power, Storage, Real Throughput
- Raspberry Pi 4 8GB vs Zero 2W for an AI Camera (2026)
- LEGO Batman: Legacy of the Dark Knight Steam Deck FPS
- Raspberry Pi 5 Projects Worth Building in 2026
- How to Build a Fully Declarative Homelab Stack
- Imaging Big-Box CD-ROMs to CompactFlash for a Windows 98 Retro PC
- Logitech G29 / G920 Not Detected on Windows 11: Step-by-Step Driver Fix Guide (2026)
- GTX 1050 Ti 4GB vs Ryzen 5 5600G iGPU: Which Actually Runs Qwen3 4B?
- Ryzen 5 5600G vs Ryzen 7 5800X for a Budget 1080p Gaming Build
- Best Sim Racing Wheel for Beginners on PS5 & PC (2026)
- Microsoft's Copilot Goes Agentic — Run Your Own Agent Locally on an RTX 3060
- Forza Horizon 6 on the RTX 3060 12GB: 1080p and 1440p Settings Guide
- SANSUI vs KOORUI 27" 4K: Which Budget 4K Gaming Monitor Wins?
- Local LLM PC Build 2026: What 12GB of VRAM Really Runs
- Best GPU for Llama 3.1 8B (2026)
- UT99 OldUnreal 469 Patch in 2026: Migration, Servers, and Period-Correct Controller Mapping
- RTX 3060 vs RTX 5060 Ti — two generations apart
- Qwen 3.6 27B with MTP: 2.5x Throughput on Local Hardware (Real Benchmarks)
- Logitech Gaming Mouse Deals Hit 47% Off for Prime Day 2026
- Cheapest 1440p GPU in 2026: Budget Buying Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090