Heel Rest Riser Replacement Compatible with MOZA CRP2 Pedals
Bottom line: The Heel Rest Riser Replacement Compatible with MOZA CRP2 Pedals is a specs-and-price decision rather than a crowd-consensus one in the sim racing category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
This heel lifter replaces the original baffle on the foot pedal. It uses the same mounting screws as the original part, requiring no new accessories. Installation takes a few minutes. The riser maintains the forward and backward adjustment range of the original baffle plate, so you can still fine-tune your pedal reach . Give your heels better support during long races. Note: This product is a third-party accessory. It is not an official accessory and is not authorized or endorsed by them. Brands mentioned are for compatibility purposes only.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Heel Rest Riser Replacement Compatible with MOZA CRP2 Pedals, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the sim racing category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Raises Heel Rest Height on Pedals:This Heel Rest Riser replaces the existing baffle plate on your pedals. Uses the existing mounting screws to attach directly to the pedal base
- Uses Existing Baffle Plate Screws:No new hardware needed for installation. You just remove the existing baffle plate and mount this Footrest Riser using the same screws that held the existing part
- Improves Heel Support During Racing:The raised footrest provides better heel positioning for long sim racing sessions. This Pedal Accessory helps reduce foot fatigue during endurance races
- Maintains Baffle Plate Adjustment Range:The riser preserves the forward and backward positioning options of the existing baffle plate. This Footrest Extension keeps your preferred pedal reach
- Disclaimer: This product is a third-party accessory. It is not an official accessory and is not authorized or endorsed by them. Brands mentioned are for compatibility purposes only.
Full Specifications
| Brand | Generic |
|---|---|
| Release date | June 17, 2026 |
| Type of item | Video Game |
| Full listing title | Heel Rest Riser Replacement Compatible with MOZA CRP2 Pedals | Footrest Height Extension for Load Cell Pedals | Racing Simulator Pedal Accessories |
Ready to buy?
Heel Rest Riser Replacement Compatible with MOZA CRP2 Pedals | Footrest Height Extension for Load Cell Pedals | Racing Simulator Pedal Accessories is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Sim Racing
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 7 5800X vs Ryzen 9 3900X: Mistral Small 24B Offload (2026)
- Minimal Raspberry Pi 5 Case: Friction-Fit 3D Printing Guide
- AVX-512 Speeds Linux Software RAID Up to 41% — What It Means for Your Homelab NAS
- Sega Genesis Games Loaded Off a Vinyl Record — and What It Means for Retro Collectors
- Intel Arc AI Performance: What Works for Inference in 2026
- AMD Ryzen AI Halo vs NVIDIA DGX Spark: Local-AI Mini-Box Showdown
- Xbox Mode's PC Performance Boost Favors Nvidia GPUs
- What Happened to the LLM Training Data Shortage?
- North Mini Code: The New Small Coding Model and the Hardware That Runs It
- AMD Ryzen AI Mini PC vs a DIY RTX 3060 Build for Local LLMs
- Raspberry Pi Projects for Students (2025 Guide)
- Intel LLM-Scaler vLLM 1.4 on Arc Pro B70: What the Latest Driver Stack Means for Local Inference
- Best Budget GPU for Local LLMs Under $300 in 2026: Why the RTX 3060 12GB Still Wins
- How Companies Name Their Monitors: Brand-by-Brand Guide
- Windows NT Now Boots on the Nintendo GameCube: What the Homebrew Port Actually Runs
- Forza Horizon 6 on Steam Deck: How Well Does It Run?
- Ryzen 7 5800X + RTX 5060 Bundle Drops to $439 With a Free CPU Cooler
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- Playing Pokémon on Steam Deck: The Real 2026 Guide
- Intel Axes BigDL/IPEX-LLM: Where Local Inference Goes Now
- How to run Qwen 3 32B on Apple M4 Max
- DeepSeek V4 Pro at $0.04 a Task: When Local Still Beats the Cloud
- Best IDE & SATA-to-USB Adapters for Retro PC Builds in 2026
- AI-Driven Vintage Driver Install on WinXP: Using Vision-LLM to Walk a Voodoo + Audigy Setup
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090