Skip to main content
Belkin 6-Foot CAT5e Crossover Networking Cable (Red)
Belkin

Belkin 6-Foot CAT5e Crossover Networking Cable (Red)

Bottom line: The Belkin 6-Foot CAT5e Crossover Networking Cable: Performance tested to exceed 350MHz, beyond Cat5e requirements; main trade-off: won't link to older hubs or switches that expect straight-through cables.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Performance tested to exceed 350MHz, beyond Cat5e requirements
  • ✓ 50-micron gold-plated connectors for clean signal transfer
  • ✓ Molded strain relief protects the plug where the cable bends
  • ✓ Red jacket sets it apart from straight-through patch cables

Cons

  • ✗ Won't link to older hubs or switches that expect straight-through cables
  • ✗ Redundant for modern NICs with Auto-MDIX, which swap pairs themselves
  • ✗ 6-foot length limits you to machines on the same desk or rack
  • ✗ Listing doesn't state gigabit crossover pinout; check before 1000BASE-T use

Manufacturer description

The Belkin 6-foot CAT5e crossover networking cable connects two computers directly, with no hub, switch, or router in between. That makes it useful for retro PC builders and LAN-party veterans. You can link two vintage machines for DOS multiplayer, move files from an old Windows 98 box to a newer PC, or reach a device's network port for setup. Belkin performance-tests the cable to exceed 350MHz, which is beyond the Category 5e requirement. It is also PowerSum tested and compliant with TIA/EIA-568-C. The connectors carry 50-micron gold plating for clean signal transfer. Molded strain relief…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Belkin 6-Foot CAT5e Crossover Networking Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. On the listing's own facts, the case for it is "Performance tested to exceed 350MHz, beyond Cat5e requirements"; the main trade-off is "Won't link to older hubs or switches that expect straight-through cables". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What is a crossover cable used for?

It links two devices directly, such as two PCs, with no hub or switch. The transmit and receive pairs are swapped inside the cable, so each machine's send lines reach the other's receive lines.

Do I need a crossover cable with modern computers?

Usually not. Most modern network adapters support Auto-MDIX and adjust on their own. A crossover cable matters most for older network cards and vintage PCs that lack that feature.

Can I use this cable to connect a PC to a router or switch?

Only if that device supports Auto-MDIX. Older hubs and switches need a standard straight-through patch cable. The red jacket makes this crossover cable easy to spot so you don't mix them up.

What are the cable's performance specs?

Belkin says it is performance tested to exceed 350MHz, beyond the Category 5e requirement. It is also PowerSum tested and TIA/EIA-568-C compliant, with 50-micron gold-plated connectors.

How well do buyers rate it?

Buyers rate it highly. Check the product listing for current warranty terms and other available lengths and colors.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Exceeds the performance requirement of Category 5e – Performance tested to exceed 350MHz
  • 50-micron gold-plated connectors ensure a clean and clear transmission
  • Molded-Strain Relief – Bends easily, for durability and fit
  • TIA/EIA-568-C Compliant
  • Available in multiple colors and lengths
  • PowerSum tested

Full Specifications

BrandBelkin
ColorRed
ModelA3X126-06-RED
Frequency350 MHz
Cable TypeEthernet
Item ShapeRound
Model NameBelkin 6-Foot CAT5e Crossover Networking Cable
Unit Count1 Count
Item Length6 Feet
Part NumberA3X126-06-RED
Connector TypeRJ45
Item Type NameBELKIN COMPONENTS A3X126-06-RED 6' CAT-5e RJ-45 Crossover Cable, Red
Number of Pins8
Number of Items1
Special FeatureNot_Performance_Used
Connector GenderMale-to-Male
Specification MetTIA
Compatible DevicesComputer
Data Transfer Rate1000 Megabits Per Second
Included ComponentsItem

Ready to buy?

Belkin 6-Foot CAT5e Crossover Networking Cable (Red) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Retro Networking Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →