Skip to main content
J-B Weld 8277 WaterWeld Epoxy Putty Stick - 2 oz.
J-B Weld

J-B Weld 8277 WaterWeld Epoxy Putty Stick - 2 oz.

Bottom line: The J-B Weld 8277 WaterWeld Epoxy Putty Stick: Cures underwater, so you can seal a leak without draining the loop; main trade-off: off-white cure color stands out on black cases unless you paint it.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Cures underwater, so you can seal a leak without draining the loop
  • ✓ 1300 psi lap shear strength per J-B Weld's own rating
  • ✓ Sets in 25 minutes, fully cured and workable in 1 hour
  • ✓ Drills, taps, files, sands, and paints after cure for re-threading ports
  • ✓ NSF certified for contact with potable water

Cons

  • ✗ Off-white cure color stands out on black cases unless you paint it
  • ✗ 300F continuous ceiling rules out soldering-adjacent or exhaust repairs
  • ✗ Hand-mixing means inconsistent cure if you under-knead the two parts
  • ✗ 2 oz stick is small for anything past a spot repair

Manufacturer description

J-B Weld 8277 WaterWeld is a hand-mixable two-part epoxy putty stick that sets in 25 minutes and cures hard in one hour, even underwater. For retro PC and custom cooling work, that underwater cure matters: you can seal a weeping barb, patch a hairline crack in a reservoir, or rebuild a stripped fitting boss without draining and stripping the whole loop. Knead a section of the 2 oz stick until the color is uniform, press it into the leak, and walk away. Once cured to its off-white finish, WaterWeld can be drilled, tapped, filed, sanded, and painted, so you can re-thread a damaged port or…

SpecPicks Verdict

SpecPicks scored J-B Weld 8277 WaterWeld Epoxy Putty Stick using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. J-B Weld's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Can J-B Weld WaterWeld really cure underwater?

Yes. J-B Weld specifies that WaterWeld sets and cures under water, which is why it is marketed for plumbing, pool and spa, boat, and potable water tank repairs.

How long does WaterWeld take to set and fully cure?

It sets in 25 minutes after you knead the two parts together and cures in 1 hour. The product's own description cites a 15-25 minute set window.

What materials will WaterWeld bond to?

J-B Weld lists iron and stainless steel, copper and brass, aluminum and bronze, fiberglass, and plastic and PVC.

How hot can a WaterWeld repair get before it fails?

It withstands continuous temperatures up to 300F (149C) and intermittent temperatures up to 350F (176C) per the manufacturer's spec.

Can I drill or tap the cured epoxy?

Yes. After curing to an off-white color, WaterWeld can be drilled, tapped, filed, sanded, and painted, so a rebuilt boss can be re-threaded.

Key Features

  • J-B Weld Waterweld: A Hand Mixable Two Part Epoxy Putty Stick, That Can Cure Under Water And Is Ideal For Repairing Plumbing, Fuel Tanks, Tubs And Showers, Drains, Pool And Spa, Boats & Potable Water Tanks And More! J-B Weld Waterweld Is Certified By The Nsf And Is Safe For Contact With Potable Water
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Waterweld Takes 25 Minutes To Set And Cures In 1 Hour. J-B Weld Waterweld Set And Cure Color Is Off White
  • Product Features And Strength: J-B Weld Waterweld Has Lap Shear Strength Of 1300 Psi, Can Withstand Continuous Temperatures Up To 300Of (149Oc) And Intermittent Temperatures Of 350Of (176 Degrees Celsius) And Is Chemical Resistant Against Petroleum, Hydraulic Fluids And Other Chemicals When Fully Cured
  • Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc

Full Specifications

BrandJ-B Weld
ColorOff White
Model8277
Volume59.14 Milliliters
Weight2 oz
MaterialWaterWeld Epoxy Putty Stick
Item FormPutty, Stick
Unit Count1.0 Ounce
Part Number8277
Material TypeWaterWeld Epoxy Putty Stick
Container TypeStick
Full Cure Time60 Minutes
Item Type Name....
Special FeatureCures under water
Viscosity LevelMedium
Number of Pieces1
Tensile Strength1300 Pounds Per Square Inch
Compatible MaterialMetal
Included ComponentsEpoxy Putty
Surface ApplicationsIron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc

Benchmark data for other processors

Ready to buy?

J-B Weld 8277 WaterWeld Epoxy Putty Stick - 2 oz. is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →