Sparkle FSP FSP300-60ATV 300W ATX Power Supply
Bottom line: Per its Amazon listing, the Sparkle FSP FSP300-60ATV 300W ATX Power Supply: FSP SPARKLE FSP300-60ATV 300W ATX Power Supply; input Current: 7A (RMS) @ 115Vrms/60Hz.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ FSP SPARKLE FSP300-60ATV 300W ATX Power Supply
- ✓ Input Current: 7A (RMS) @ 115Vrms/60Hz
- ✓ Backed by Sparkle's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Feature: Complied with ATX12V 2.0 standard High efficiency, low noise and ripple and reliability Remote On/Off function Internal 80mm 12V DC fan included Noise Killer (Thermal fan speed control function) Complies with FCC part 15 subpart J Class B and CISPR 22 Class B Output over voltage, short circuit, and over current protection 100% Hi-pot, ATE, and burn-in tested Re-settable power shut down Approved by UL 60950, TUV, IEC 60950, NEMKO (CB Report) Included On/Off Switch Input: Input Range: ±10% of 115Vrms/57~ 63Hz, ±10% of 230Vrms/47~ 53Hz, manual selection. Input Current: 7A (RMS) @…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Sparkle FSP FSP300-60ATV 300W ATX Power Supply, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- FSP SPARKLE FSP300-60ATV 300W ATX Power Supply, support Norco rackmount cases, such as RPC-230, RPC-250, RPC-270, RPC-430, RPC-450, RPC-470.......
- Feature: Complied with ATX12V 2.0 standard High efficiency, low noise and ripple and reliability Remote On/Off function Internal 80mm 12V DC fan included Noise Killer (Thermal fan speed control function) Complies with FCC part 15 subpart J Class B and CISPR 22 Class B Output over voltage, short circuit, and over current protection 100% Hi-pot, ATE, and burn-in tested Re-settable power shut down Approved by UL 60950, TUV, IEC 60950, NEMKO (CB Report) Included On/Off Switch Input: Input Range: ±10% of 115Vrms/57~ 63Hz, ±10% of 230Vrms/47~ 53Hz, manual selection. Input Current: 7A (RMS) @ 115Vrms/60Hz, 4A (RMS) @ 230Vrms/50Hz Inrush Current: 80A Max cold start, 100A Max warm start measured at 115Vrms/60Hz Output: Total Output: 300W +3.3V and +5V total output not exceed 120W +3.3V is load on 20A then +5V maximum load is 10.8A; +5V is load on 20A then +3.3V maximum load is 6A +12V1+12V2 total output not exceed 264W +3.3V, +5V, +12V1, and +12V2 total output not exceed 286W Connectors: 20/24pin Main power; 4pin P4 power; 4x Peripheral; 1x SATA; 1x Floppy Dielectric Withstand: Input to frame ground 1800V AC for 1 second Insulation Resistance: 20 Meg. Ohm Min. Efficiency: 70% minimum measured at nominal AC main voltage with maximum load on all outputs Rise Time: Less than 20mS on all outputs Hold-up Time: 12ms minimum at 115V/230VAC Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible) Leakage Current: Not exceed 3.5mA MTBF:100,000 hours on maximum load at +25°C Dimension (WxLxH): 6 x 5.5 x 3.4 inch / 150 x 140 x 86 mm
Full Specifications
| Brand | Sparkle |
|---|---|
| Wattage | 300 watts |
| Fan Size | 80 Millimeters |
| Dimensions | 6 x 5.5 x 3.4 inch |
| Model Name | FSP300-60ATV |
| Unit Count | 1.0 Count |
| Form Factor | ATX |
| Model Number | FSP300-60ATV |
| Compatibility | Switch |
| Connector Type | ATX |
| Cooling Method | Air |
| Number of Fans | 1 |
| Output Wattage | 120 Watts |
| Item Dimensions | 9.2 x 6.9 x 3.6 inches |
| Mfr Part Number | FSP300-60ATV |
| Compatible Devices | Personal Computer |
| Power Supply Design | Internal |
| Maximum Input Voltage | 115 Volts |
| Minimum Input Voltage | 115 Volts |
| Item dimensions L x W x H | 9.2 x 6.9 x 3.6 inches |
Ready to buy?
Sparkle FSP FSP300-60ATV 300W ATX Power Supply is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Best Storage Kit for Archiving a Physical Game Collection in 2026
- Sony Trinitron FW900 Setup for Retro Gaming: Resolution Sweet Spots, Calibration, and Refresh-Rate Math
- Local Coding Agents: 87% HumanEval with a 4B-Parameter Model
- Anthropic's 2GW AMD Deal: Should You Still Run Local?
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- What Fits in 12GB VRAM? RTX 3060 Local LLM Model Guide (2026)
- Ryzen 5 5600G for Local LLMs: iGPU + CPU Inference in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for New Streamers
- Self-Hosted Home Assistant on a Raspberry Pi 4 8GB (2026 Build)
- Open Source AI Code Reviewers You Can Self-Host in 2025
- ComfyUI on a 12GB GPU: SDXL and Flux Setup, VRAM Limits, and Real Throughput
- Best Streaming Setup Gear for Beginners in 2026
- Best PC Couch-Gaming Setup in 2026: Controllers, Display, and Audio
- Qwen 3.6 27B on a 12GB RTX 3060: Which Quant Actually Fits?
- Handheld Gaming PC Comparison: 2024's Top Picks
- Microsoft Mirage Adds Persistent Spatial Memory: Can a 12GB GPU Run Local Video Gen?
- ZOTAC RTX 3060 12GB vs Intel Arc B580 12GB for 1440p Gaming in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X vs Ryzen 7 5800X for 1080p Gaming in 2026
- Best Flight Sim Gear for Beginners in 2026
- Best USB-C Capture and Streaming Gear for Console + PC Creators (2026)
- Best Sim Racing Wheel for Beginners: G29 vs HORI vs Thrustmaster
- Intel Arc B60 Stable Diffusion: Setup & Benchmarks 2025
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming in 2026
- Forza Horizon 6 Boots in 4 Seconds with Advanced Shader Delivery
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090