Socket 370 Aluminum Heat Sink & 2.36" Ball Bearing Fan w/3-Pin Connector up to Pentium III 1.4GHz
Bottom line: Per its Amazon listing, the Socket 370 Aluminum Heat Sink & 2.36" Ball Bearing Fan w/3-Pin: 2.36-inch (60 mm) brushless ball bearing fan DC 12V; supports Intel Celeron and Pentium III Socket 370 CPUs up to 1.4 GHz.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Socket 370 Aluminum Heat Sink and Fan General Features: Aluminum heat sink
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Used and vintage listings vary by seller and condition — check the listing photos, description and return terms before buying
Manufacturer description
Socket 370 Aluminum Heat Sink and Fan General Features: Aluminum heat sink 2.36-inch (60 mm) brushless ball bearing fan DC 12V Supports Intel Celeron and Pentium III Socket 370 CPUs up to 1.4 GHz
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Socket 370 Aluminum Heat Sink & 2.36" Ball Bearing Fan w/3-Pin…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpus category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpus of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Socket 370 Aluminum Heat Sink and Fan General Features: Aluminum heat sink
- 2.36-inch (60 mm) brushless ball bearing fan DC 12V
- Supports Intel Celeron and Pentium III Socket 370 CPUs up to 1.4 GHz
- 3-pin power connector (9-inch length, approximate) Regulatory Approvals: CE
Full Specifications
| Manufacturer | Generic |
|---|---|
| ItemPartNumber | 2103-781926 |
Benchmark data for other processors
Ready to buy?
Socket 370 Aluminum Heat Sink & 2.36" Ball Bearing Fan w/3-Pin Connector up to Pentium III 1.4GHz is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Read our analysis
SpecPicks coverage that features this Retro CPU.
Related Retro CPUs
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Old RAM Identification: Decode Part Numbers & Specs
- Does a Gaming Mouse Pad Actually Improve Your Aim? QcK vs Generic
- Cursor vs Cline vs Aider for Local-First AI Coding in 2026
- AIO vs Air on a Ryzen 7 5800X: Corsair ML240L vs Noctua NH-U12S
- Best GPU for Local LLMs Under $350: Why the RTX 3060 12GB Still Wins
- Mistral AI Seeks €3 Billion to Fund Its European Push — The Local-vs-Cloud Angle
- Baidu Unlimited OCR Runs Locally: Document AI on an RTX 3060 12GB
- Best CPU Cooling for AMD Ryzen Builds in 2026
- FIDECO vs Unitek SATA/IDE-to-USB Adapters: Imaging and Rescuing Vintage Drives in 2026
- Best Adaptive and One-Handed Gaming Controllers in 2026
- MCL8080+ Squeezes an Intel 8080 Emulator into an ATtiny85
- Run Qwen 3.6 27B Locally: What Fits on 12GB in 2026
- Best CPU for Streaming and Gaming Under $300: Ryzen 7 5800X vs 5700X vs 5600G
- Open-Weight Models Caught Up to Frontier: What to Run on a 12GB GPU
- Best SSD to Upgrade a PS4 Pro: Samsung 870 EVO vs Crucial BX500
- Best Streaming Starter Kits in 2026: Mic, Light, Capture, and the One-Box Builds
- AVX-512 Speeds Linux Software RAID Up to 41% — What It Means for Your Homelab NAS
- Best Budget Streaming Starter Kit for 2026 (Under $200)
- AMD Radeon RX 9070 GRE Linux Performance 2026
- Training an LLM in Swift, Part 1: Matrix Mult Speed
- ProgramBench: Can LLMs Rebuild Programs From Scratch?
- NVMe vs SATA SSD for Local LLM Model Libraries in 2026
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Your Game Library (2026)
- Installing 3dfx Voodoo Glide Drivers on Windows 98 in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090