Kiorafoto
Kiorafoto 24 Slots Memory Card Case for SD Micro SD TF
Bottom line: The Kiorafoto 24 Slots Memory Card Case for SD Micro SD TF ($7.19 on Amazon as of 2026-10-06): Holds 24 cards total: 12 full-size SD plus 12 microSD in one tray; main trade-off: 143 x 82 x 28mm is bulkier than a slim 8-card wallet.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Holds 24 cards total: 12 full-size SD plus 12 microSD in one tray
- ✓ IPX5 water-resistant seal blocks rain, dust, and grit
- ✓ Molded rubber lining absorbs shock and stops cards rattling
- ✓ Carabiner clips to a strap or pack instead of sinking into a bag
Cons
- ✗ 143 x 82 x 28mm is bulkier than a slim 8-card wallet
- ✗ No labeling surface to mark shot cards vs. empty ones
- ✗ IPX5 resists spray, not submersion in water
- ✗ Fixed 12/12 split wastes slots if you shoot only one card format
Manufacturer description
The Kiorafoto 24 Slots Memory Card Case gives you one place to keep an entire shoot's worth of storage. The tray holds 12 full-size SD, SDXC, or SDHC cards on one side and 12 microSD, microSDXC, or microSDHC cards on the other, so you are not juggling loose plastic sleeves at the bottom of a camera bag. The shell is polycarbonate resin with a weather-resistant seal rated IPX5 for water resistance, and a molded rubber interior lining cushions each card against shock and vibration. A snap-on locking system keeps the lid shut in transit, and a molded eyelet lets you clip the included carabiner…
SpecPicks Verdict
SpecPicks scored Kiorafoto 24 Slots Memory Card Case for SD Micro SD TF using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Kiorafoto's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How many memory cards does this case hold?
24 cards total: 12 full-size SD, SDXC, or SDHC cards and 12 microSD, microSDXC, or microSDHC cards, in dedicated slots.
Is the Kiorafoto card case waterproof?
It is IPX5 water-resistant, not waterproof. The weather-resistant seal and polycarbonate shell keep out spray, dust, and debris, but do not submerge it.
What are the case dimensions?
143 x 82 x 28mm, or 5.63 x 3.23 x 1.10 inches, which fits a camera bag side pocket or a jacket pocket.
Will the cards fall out if the case opens in my bag?
A snap-on locking system holds the lid closed, and the molded rubber interior grips each card so they stay seated in transit.
Can I attach it to a camera strap or backpack?
Yes. A molded eyelet on the shell accepts the carabiner, so you can clip it to a strap, hook, belt loop, or pack ring.
Key Features
- Capacity: 12 SD + 12 Micro SD memory cards
- Case dimension: 143 x 82 x 28mm / 5.63 x 3.23 x 1.10 inches
- Molded rubber interior lining, durable polycarbonate resin exterior with a weather-resistant seal to keep out water, dust, and debris
- Snap-on locking system
- Molded eyelet for attaching the case to a strap or hook
Full Specifications
| Brand | Kiorafoto |
|---|---|
| Color | for 12 SD + 12 Micro SD |
| Theme | Modern |
| Pattern | Solid |
| Capacity | 12 SD + 12 Micro SD memory cards |
| Material | Polycarbonate, Rubber |
| Dimensions | 143 x 82 x 28mm |
| Shell Type | Hard & Soft |
| Unit Count | 1 Count |
| Form Factor | Case |
| Model Number | KMC-SDMSD24 |
| Case dimension | 143 x 82 x 28mm / 5.63 x 3.23 x 1.10 inches |
| Item Dimensions | 5.63 x 3.23 x 1.1 inches |
| Mfr Part Number | KMC-SDMSD24 |
| Subject Character | no character |
| Enclosure Material | Polycarbonate, Rubber |
| Additional Features | Waterproof |
| Age Range Description | Adult |
| Water Resistance Level | Water Resistant |
| Compatible Phone Models | SD , MicroSD , TF memory cards |
| Full listing title | Kiorafoto 24 Slots Memory Card Case for SD Micro SD TF,IPX5 Water-Resistant | Anti-Shock,Memory Card Holder for 12 MicroSD SDXC SDHC TF & 12 SD SDXC SDHC Cards,Hard Shell with Rubber Interior & Carabiner |
Ready to buy?
Kiorafoto 24 Slots Memory Card Case for SD Micro SD TF,IPX5 Water-Resistant | Anti-Shock,Memory Card Holder for 12 MicroSD SDXC SDHC TF & 12 SD SDXC SDHC Cards,Hard Shell with Rubber Interior & Carabiner is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- CRT PC Monitors for Retro Gaming: 2026 Buying Guide
- Controlling Windows 98 and XP PCs with AI agents — the retro-agent project
- Steam Deck Gyro Aiming for FPS Games: A Setup Guide
- RTX 4090 AI TOPS in 2026: What the Number Means
- Voodoo3 3000 PCI Install Guide for Win98 SE in 2026
- 8BitDo Pro 2 vs GameSir G7 SE: Best Controller for PC Emulation in 2026
- Half an MI350X in a PCIe Slot: Inside AMD’s 144GB MI350P, the First Air-Cooled CDNA 4 Card
- The Budget Streaming Starter Kit: Mic, Light, and Webcam Under $250
- Best Storage for a Windows 98 Retro PC: CompactFlash vs IDE-to-USB SSD Adapters
- Intel-Scaler vLLM 0.21.0: What the New Release Changes for Intel GPU Inference
- Best Controller for Fighting Games on PC in 2026: HORI HORIPAD vs 8BitDo Pro 2 vs DualSense
- Gemini 3.6 Flash Shipped: Why Local Builders Still Reach for a 12GB GPU
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
- Best CPU Cooler for the Core i7-9700K in 2026
- llama.cpp on Snapdragon Hexagon NPU: First Real Benchmarks and What Actually Works
- Best Budget GPU for CNN & Vision Inference 2026: RTX 3060 12GB
- Rescue a Dying Retro PC: Image Your IDE Drive to CompactFlash First
- Mistral Medium 3.5 Dense Local Inference: Hardware Tiers from 24GB to 192GB
- Is My CPU Sufficient for Light Universe Simulations?
- Best Single-Board Computer for a 2026 Home Lab
- AI-Driven Driver Hunt: Installing Vintage Sound Cards on Windows 98 With Claude
- Best Handheld Gaming PC Under $200 in 2026
- Best PC Game Controllers for 2026: 5 Picks Ranked
- How to Build a Fully Declarative Homelab Stack
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090