Skip to main content
BTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,DC5V 3.28FT 60LED IP30
BTF-LIGHTING

BTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,DC5V 3.28FT 60LED IP30

Bottom line: The BTF-LIGHTING WS2812B IC RGB LED Strip ($8.99 on Amazon as of 2026-10-21 04:14 UTC): 60 individually addressable pixels in 3.28ft, each LED its own WS2812B IC; main trade-off: 5V only, DC12V or DC24V power will damage the strip.

$8.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $8.99 Compare to similar rgb & lighting

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ 60 individually addressable pixels in 3.28ft, each LED its own WS2812B IC
  • ✓ 24-bit color depth with 256-level brightness for smooth fades and chases
  • ✓ UL Listed strip, wires, connectors, and circuit boards
  • ✓ Pure gold bonding wires instead of alloy or copper, per BTF-LIGHTING
  • ✓ Cuttable at every LED with 3-pin connectors pre-installed on both ends

Cons

  • ✗ 5V only, DC12V or DC24V power will damage the strip
  • ✗ Power supply and controller are not included
  • ✗ IP30 rating limits this version to dry indoor placement
  • ✗ Needs a separate DC5V 2A 10W supply for the full 60-LED run

Manufacturer description

Each of the 60 LEDs is its own IC, so you can drive static, chasing, or full-spectrum dynamic effects with 24-bit color depth and 256-level brightness control over a single SPI data line. The 10mm-wide black PCB is cuttable at every LED, and 3-pin connectors come pre-installed on both ends for daisy-chaining longer runs in series or parallel. BTF-LIGHTING builds this strip with pure gold bonding wires rather than alloy or copper, which the manufacturer credits for lower light decay over the strip's life. It is UL Listed, with UL-approved wires, connectors, and circuit boards, and the IP30…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored BTF-LIGHTING WS2812B IC RGB LED Strip using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. BTF-LIGHTING's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Do I need a separate power supply and controller?

Yes. The box includes the strip, a voltage compensation wire, a 3-pin male connector, and a manual only. BTF-LIGHTING recommends a DC5V 2A 10W supply for this 60-LED length, and a controller is purchased separately.

Can I run this on a 12V power supply?

No. This strip supports 5V only, and BTF-LIGHTING explicitly warns against DC12V or DC24V, which will damage it. Use a regulated DC5V source.

Will this work with WLED and an ESP32?

Yes. BTF-LIGHTING lists ESP32 with WLED, Raspberry Pi, and Arduino UNO R3 among supported DIY platforms, along with SP803E and SP805E controllers, BanlanX app controllers, Tuya DR03W, and industrial K1000C and K8000C units.

Can I cut the strip to a custom length?

Yes. Every LED is a cut point, so you can trim the 60-pixel run to any length and reconnect segments in series or parallel using the 3-pin connectors.

Is this strip safe to use outdoors?

This is the IP30 version, which is rated for indoor use and ships with 3M double-sided adhesive. BTF-LIGHTING also offers IP65 and IP67 variants, though the listing states all three are intended for indoor applications.

Key Features

  • 【Pure Gold Wires】High-quality LED Chip. Instead of others' alloy chip wire or copper chip wire, This WS2812B RGB LED use Pure Gold Wires inner, which more stable, have exceptional quality, ultra bright, less light decay and longer life.
  • 【Individually Addressable WS2812B IC】 WS2812B IC Built-in 5050 SMD .Supporting SPI individual addressing, each LED is independently programmable; 24-bit color depth and 256-level brightness control enable smooth, precise full-spectrum lighting effects including static, chasing and dynamic modes
  • 【UL Listed】UL-certified LED strip for reliable safety, equipped with 3M double-sided adhesive; UL-approved wires, 3-pin connectors and circuit boards included. IP30/IP65 versions come with 3M tape for easy mounting; IP67 version requires fastening clips (3M tape not included)
  • 【Parameter】Flexible and cuttable 3.2ft LED strip 60LEDs=60IC=60Pixle.3-pin connectors pre-installed on either end for easy daisy chain connection.10mm Width.Black PCB.
  • 【Versatile Functions】Compatible with multiple controllers: DIY Projects (SP803E,SP805E,ESP32, WLED, Rasp Pi, UNO R3 etc.), Tuya APP (DR03W), BanlanX APP (SP630E/SP530E/SP611E/SP602E/SP608E/SP107E/SP105E etc.),industrial-grade (K1000C, K8000C, etc.). Choose the right controller per your project.Recommended power supply: DC5V 2A 10W (for 3.28FT 60LED strip).
  • 【Flexible Installation,Wide Application】3-pin connectors pre-installed on either end for easy daisy chain connection.Each LED is cuttable for custom length and shape, supporting series or parallel connection. Ideal for LED screens, video walls, advertising boards, commercial venues (hotels, KTVs, bars), and festive decorations (Christmas, weddings). IP30/IP65/IP67 for indoor use.

Full Specifications

BrandBTF-LIGHTING
ColorBlack Pcb Ip30
StyleModern
ThemeIndoor LED Strip Lighting
Voltage5 volts
Wattage18 watts
OccasionChristmas, Halloween, New Year
Unit Count3.2 Feet
Form FactorStrip Lights
Item Length38.4 inches
Light ColorMulticolor
Model NumberWS2812B1M60LB30
Power SourceCorded Electric
Material TypeSilicone Rubber
Product StyleModern
Control MethodApp, Voice
Controller TypeApp Control
Item Dimensions5.91 x 3.94 x 0.59 inches
Number of Items1
Special FeatureDIY Project, Dream color, Individually Addressable, Pure Gold Wire, WS2812B RGB IC

Ready to buy?

BTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,DC5V 3.28FT 60LED IP30 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $8.99

*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.

Related RGB & Lighting

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
BTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,DC5V 3.28FT 60LED IP30
$8.99
View on Amazon →