Skip to main content
BTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,Pure Gold Wires,DC5V 16.4FT 150LED 5050SMD,Individually Addressable,Flexible for DIY Chasing Full Color Project,3M Tape,IP30(No Adapter or Controller)
BTF-LIGHTING

BTF-LIGHTING WS2812B IC RGB LED Strip

Bottom line: The BTF-LIGHTING WS2812B IC RGB LED Strip: 150 individually addressable pixels over 16.4ft, cuttable at every LED; main trade-off: no power supply included; needs a separate DC5V 6A 30W unit.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar rgb & lighting

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 150 individually addressable pixels over 16.4ft, cuttable at every LED
  • ✓ 24-bit color depth with 256-level brightness per pixel
  • ✓ Pure gold bonding wires instead of alloy or copper chip wire
  • ✓ UL Listed strip, wires, connectors, and circuit boards

Cons

  • ✗ No power supply included; needs a separate DC5V 6A 30W unit
  • ✗ No controller included, so budget for an ESP32, SP803E, or similar
  • ✗ IP30 rating is indoor-only with no moisture protection
  • ✗ 5V only; DC12V or DC24V power will destroy the strip

Manufacturer description

BTF-LIGHTING's WS2812B addressable LED strip gives you 150 individually programmable pixels across a 16.4ft flexible run, with the WS2812B IC built directly into each 5050 SMD package. Every pixel carries 24-bit color depth and 256-level brightness control over a single SPI data line, so chasing effects, static washes, and dynamic animations all run from one microcontroller pin. The strip uses pure gold bonding wires inside the chip rather than the alloy or copper wire found in cheaper strips, which BTF-LIGHTING credits for less light decay over the strip's life. It is UL Listed, with…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored BTF-LIGHTING WS2812B IC RGB LED Strip using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. BTF-LIGHTING's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does this LED strip come with a power supply and controller?

No. The box contains the WS2812B strip, a voltage compensation wire, one 3-pin male connector, and a user manual. BTF-LIGHTING recommends a DC5V 6A 30W supply for this 16.4ft 150LED strip, and you buy the controller separately.

Can I run this strip on 12V or 24V?

No. It is 5V only. The listing explicitly warns against connecting DC12V or DC24V power, which will damage the strip.

Will this work with WLED on an ESP32?

Yes. BTF-LIGHTING lists ESP32, WLED, Raspberry Pi, and Arduino UNO R3 among supported DIY setups, plus SP803E, BanlanX SP-series controllers, Tuya DR03W, and industrial K1000C and K8000C units.

Can I cut the strip to a shorter length?

Yes. Each of the 150 LEDs is a separate cut point, so you can trim to custom lengths and shapes. It supports series or parallel connection, and pre-installed 3-pin connectors on both ends let you daisy chain full strips.

Is this strip safe to use outdoors?

No. This is the IP30 version, which BTF-LIGHTING rates for indoor use only. IP65 and IP67 versions exist for wetter environments; the IP67 version needs fastening clips rather than the 3M tape included here.

Key Features

  • 【Pure Gold Wires】High-quality LED Chip. Instead of others' alloy chip wire or copper chip wire, This WS2812B RGB LED use Pure Gold Wires inner, which more stable, have exceptional quality, ultra bright, less light decay and longer life.
  • 【Individually Addressable WS2812B IC】 WS2812B IC Built-in 5050 SMD .Supporting SPI individual addressing, each LED is independently programmable; 24-bit color depth and 256-level brightness control enable smooth, precise full-spectrum lighting effects including static, chasing and dynamic modes
  • 【UL Listed】UL-certified LED strip for reliable safety, equipped with 3M double-sided adhesive; UL-approved wires, 3-pin connectors and circuit boards included. IP30/IP65 versions come with 3M tape for easy mounting; IP67 version requires fastening clips (3M tape not included)
  • 【Parameter】Flexible and cuttable 16.4ft LED strip 150LEDs=150IC=150Pixle.3-pin connectors pre-installed on either end for easy daisy chain connection.10mm Width.Black PCB.
  • 【Versatile Functions】Compatible with multiple controllers: DIY Projects (SP803E,ESP32, WLED, Rasp Pi, UNO R3 etc.), Tuya APP (DR03W), BanlanX APP (SP630E/SP530E/SP611E/SP602E/SP608E/SP107E/SP105E etc.),industrial-grade (K1000C, K8000C, etc.). Choose the right controller per your project.Recommended power supply: DC5V 6A 30W (for 16.4FT 150LED strip).
  • 【Flexible Installation,Wide Application】3-pin connectors pre-installed on either end for easy daisy chain connection.Each LED is cuttable for custom length and shape, supporting series or parallel connection. Ideal for LED screens, video walls, advertising boards, commercial venues (hotels, KTVs, bars), and festive decorations (Christmas, weddings). IP30/IP65/IP67 for indoor use.

Full Specifications

BrandBTF-LIGHTING
ColorBlack Pcb Ip30
StyleModern
ThemeIndoor LED Strip Lighting
Voltage5 volts
Wattage45 watts
OccasionChristmas, Halloween, New Year
Unit Count16.4 Feet
Item Length199.2 inches
Light ColorMulticolor
Model NumberWS2812B5M30LB30
Power SourceCorded Electric
Material TypeSilicone Rubber
Product StyleModern
Control MethodApp, Voice
Controller TypeApp Control
Item Dimensions5.91 x 3.94 x 0.59 inches
Number of Items1
Special FeatureDIY Project, Dream color, Individually Addressable, Pure Gold Wire, WS2812B RGB IC
Light Source TypeLED
Full listing titleBTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,Pure Gold Wires,DC5V 16.4FT 150LED 5050SMD,Individually Addressable,Flexible for DIY Chasing Full Color Project,3M Tape,IP30(No Adapter or Controller)

Ready to buy?

BTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,Pure Gold Wires,DC5V 16.4FT 150LED 5050SMD,Individually Addressable,Flexible for DIY Chasing Full Color Project,3M Tape,IP30(No Adapter or Controller) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related RGB & Lighting

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
BTF-LIGHTING WS2812B IC RGB LED Strip,UL Listed,Pure Gold Wires,DC5V 16.4FT 150LED 5050SMD,Individually Addressable,Flexible for DIY Chasing Full Color Project,3M Tape,IP30(No Adapter or Controller)
View on Amazon →