DIN Rail Mount for Raspberry Pi (3-Pack)
Bottom line: Per its Amazon listing, the DINrPlate DIN Rail Mount for Raspberry Pi ($31.99 on Amazon as of 2026-11-22 05:22 UTC, orderable but not in stock): securely clips to 35mm DIN rail, requiring only 32mm of DIN space.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Each DINrPlate includes plastic mount, four (4) screws & tie-wrap.
- ✓ Backed by DINrPlate's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Three (3) individually packaged DINrPlate (DRP2) DIN Rail mounts for Raspberry Pi 2, 3, 4 & 5. Also supports Odroid C2.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for DINrPlate DIN Rail Mount for Raspberry Pi, so this read rests on the manufacturer's listed specs and the current price in the single board computers category (how we evaluate). Compare with similarly-priced alternatives in the single board computers category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Each DINrPlate includes plastic mount, four (4) screws & tie-wrap.
- Each DINrPlate individually packaged.
- Securely clips to 35mm DIN rail, requiring only 32mm of DIN space. Nylon 66 conforms to UL94 V-2 Flammability Standard. Better cooling than enclosed case designs which can trap heat.
- Micro-USB cable held in place with an innovative strain relief, and includes tie-wrap.
- NOTE: Raspberry Pi, USB Cable, Micro SD & DIN Rail are not included. Also compatible with Raspberry Pi B+, Odroid C2 & ASUS Tinkerboard
Full Specifications
| NOTE | Raspberry Pi, USB Cable, Micro SD & DIN Rail are not included. Also compatible with Raspberry Pi B+, Odroid C2 & ASUS Tinkerboard |
|---|---|
| Brand | DINrPlate |
| Color | Grey |
| Connectivity | USB |
| Package Dimensions | 6.5 x 5.04 x 1.1 inches |
| Computer Memory Type | DRAM |
Ready to buy?
DIN Rail Mount for Raspberry Pi (3-Pack) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Single Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Cisco's Open Security LLMs: Local Vulnerability Scanning on an RTX 3060
- Best SSD for a Steam Deck or ROG Ally Upgrade (2026)
- Is the Ryzen 7 7800X3D Worth It in 2026?
- Xbox Cloud Gaming in 2025: How It Works & What You Need
- Intel Arc LLM Inference: A770 & B580 Qwen3 tok/s Guide
- Does Ryzen 3D V-Cache Speed Up CPU-Only LLM Inference?
- Best Mouse Pad for Competitive FPS Aiming on Large Desks (2026)
- Open WebUI — self-hosted ChatGPT for your local models
- Best Hardware for Running MoE LLMs Locally in 2026
- 1440p 500Hz QD-OLED Monitors: 2025 Round-Up
- Chrome Using Too Much RAM? Fixes + Hardware Upgrades
- How LAN Parties Died: A 2002-2008 Cultural Retrospective
- ComfyUI Ideogram 4: Setup, GPU Needs & Hardware Guide
- Ryzen 7 5800X vs Ryzen 7 5700X for Gaming and Local AI: Which Wins?
- Using Claude to Drive Period-Correct Win98 Driver Installs on Voodoo and GeForce 4 Hardware
- RTX 4090 vs RX 7900 XTX
- First PC Build Guide: Components, Budget & Aesthetics
- Govee vs DAYBETTER vs KSIPZE: Best LED Strip for Desk and Monitor Bias Lighting
- Self-Hosting DeepSeek on an RTX 3060 12GB: What Fits in 2026
- Best Gaming CPU Coolers Under $100 in 2026
- Best CPU Cooler for Ryzen 7 5800X Overclocking in 2026
- Best Fighting Game Controller and Arcade Stick for PC in 2026
- Best Gaming Monitor for Console + PC in 2026
- 42 LLMs Tested for Apocalypse Compliance: What Data Shows
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090