Unistorm Raspberry Pi 3 Model B+ Aluminum Case
Bottom line: The Unistorm Raspberry Pi 3 Model B+ Aluminum Case: Fits both Raspberry Pi 3 Model B and Model B+ boards; main trade-off: not listed as compatible with Raspberry Pi 4 or Pi 5 boards.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Fits both Raspberry Pi 3 Model B and Model B+ boards
- ✓ Dual cooling fans plus an aluminum alloy shell that also cools passively
- ✓ Port and slot cutouts line up with every Pi 3 B/B+ connector
- ✓ Ships with thermal silica and a full set of assembly screws
- ✓ Ultra-thin black aluminum alloy shell instead of plastic
Cons
- ✗ Not listed as compatible with Raspberry Pi 4 or Pi 5 boards
- ✗ Fan size, voltage and noise specs are not published
- ✗ No case dimensions or weight given in the listing
- ✗ Screw-together assembly takes longer than snap-fit cases
Manufacturer description
Raspberry Pi Armor Case Raspberry Pi Metal Case With Dual Fan Aluminium Alloy Box Cooling Fan for Raspberry Pi 3 Model BItem Description:Material: Aluminum alloyColor: BlackCompatible with: Raspberry Pi 3 Model B+,Raspberry Pi 3 Model BFeatures:Passive cooling architecture design can reach perfect heat dissipation.Features:Ultra-thin designEasy to installFast Heat dissipationSilence Fan without noiseSmooth and straight aluminum materialAll ports and slots of the case can match with Raspberry Pi 3 Model B+ perfectlyPacking List:Aluminum alloy Case x 1pcsAssembly screw x 1 setThermal silica x…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Unistorm Raspberry Pi 3 Model B+ Aluminum Case, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the single board computers category before committing. On the listing's own facts, the case for it is "Fits both Raspberry Pi 3 Model B and Model B+ boards"; the main trade-off is "Not listed as compatible with Raspberry Pi 4 or Pi 5 boards". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- It can fit with both Raspberry Pi 3 Model B and Model B+
- Passive cooling architecture can reach perfect heat dissipation
- Good quality and nice design can make your Raspberry fashion enough
- All ports and all slots of the case can match with Raspberry Pi 3 Model B+/B perfectly
- We provide returning service. Just feel free to buy. If you have any problem, We will accept returning immediately.
Full Specifications
| Brand | Unistorm |
|---|---|
| Color | With Dual fan |
| Fan Size | 12 centimeters |
| Material | Aluminum, Metal |
| Case Type | Raspberry Pi |
| Model Name | Model B+ |
| Unit Count | 1 Count |
| Cooling Method | Air |
| Number of Fans | 4 |
| Mfr Part Number | 123456 |
| Number of Items | 1 |
| Number of Packs | 1 |
| Total Usb Ports | 2 |
| Antenna Location | General Purpose, IoT, Learning, Media Center |
| Compatible Devices | Raspberry Pi 3 Model B, Raspberry Pi 3 Model B+ |
| Enclosure Material | Aluminum, Metal |
| Total USB 2.0 Ports | 2 |
| Hard Disk Form Factor | 3.5 inches |
| Supported Motherboard | Mini ITX |
| Motherboard Compatability | Mini ITX |
| Full listing title | Raspberry Pi 3 Model B+ Aluminum Case with Dual Cooling Fan Metal Shell Black Enclosure Compatible with Raspberry Pi 3 Model B (with Dual Fan) |
Ready to buy?
Raspberry Pi 3 Model B+ Aluminum Case with Dual Cooling Fan Metal Shell Black Enclosure Compatible with Raspberry Pi 3 Model B (with Dual Fan) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Single Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Build a Raspberry Pi 4 8GB RetroPie Emulation Station in 2026
- Best Retro Console Reissues to Buy in 2026
- Sega Genesis Games Loaded Off a Vinyl Record — and What It Means for Retro Collectors
- Can a Local RTX 3060 12GB LLM Debug Linux Boot Like Gemini?
- Best Game Controllers for PC and Console (2026)
- How to Find and Join Active UT99 and UT2004 Servers in 2026
- Best PC and Emulation Controllers in 2026
- Building a Period-Correct 2002 GeForce 4 Ti + Pentium 4 Northwood Win98/XP Dual-Boot
- Budget Ollama Build Under $500: What Actually Runs in 2026
- Best GPU for Forza Horizon 6 at 1080p & 1440p in 2026
- Best SATA SSD for a PS4 Slim and Emulation Box in 2026
- OpenAI Codex Now Records and Replays Your Workflow: the Local-Rig Angle
- Best SATA SSD to Upgrade Your PS4 Pro Storage in 2026
- RTX 5070 Ti vs RTX 5080: Is the $250 MSRP Step-Up Worth It at 1440p and 4K?
- Best 27-inch 4K Monitor for PC and Console: Odyssey vs KOORUI
- Best Game Controller for PC in 2026: 5 Picks Tested Against Real Use
- Heterogeneous GPU Weighting and Layer Splitting: Mixed-GPU LLM Inference on Consumer Hardware
- DeepSeek V4.1-Flash on One RTX 3060 12GB vs Two: Why Neither Can Load It, and What 24 GB Runs Instead
- Intel Kills BigDL: The Local-LLM Path Forward in 2026
- Ryzen 7 5800X vs 5700X: Best 8-Core AM4 CPU 2026
- 48GB DDR5 or 12GB VRAM? What Actually Speeds Up Local LLMs
- Started a Homelab Last Month — Is the Ryzen 5 5600G Build Right?
- Ryzen 7 5800X vs Ryzen 5 5600G for Gaming and Streaming
- Qwen 3.6 35B-A3B on a 16GB GPU: RTX 5060 Ti vs RX 9060 XT Quant Table
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090