Skip to main content
Suptek Dual LED LCD Monitor Stand up Desk Mount for 2 / Two Screens up to 32 inch Extra Tall 31.5" Pole Heavy Duty Fully Adjustable Stand Vertical Array (MD6802)
suptek

Suptek Dual LED LCD Monitor Stand up Desk Mount

Bottom line: The Suptek Dual LED LCD Monitor Stand up Desk Mount: 31.5-inch pole gives real vertical travel for stacked screens; main trade-off: 22 lb per-arm limit rules out heavy 32-inch curved panels.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 31.5-inch pole gives real vertical travel for stacked screens
  • ✓ Holds two displays up to 32 inches and 22 lbs each
  • ✓ 360-degree rotation flips either screen to portrait
  • ✓ C-clamp plus grommet base for desks to 3.85 inches thick

Cons

  • ✗ 22 lb per-arm limit rules out heavy 32-inch curved panels
  • ✗ Vertical array only, no side-by-side layout
  • ✗ Fits 75x75 and 100x100 VESA only, no 200mm patterns
  • ✗ Tall pole raises the top screen above some eye lines

Manufacturer description

Each arm carries up to 22 lbs and accepts 75x75mm or 100x100mm VESA patterns, so it fits most mainstream office and gaming panels without an adapter plate. Articulation is the reason to pick it: full 360-degree rotation lets you flip a screen to portrait for code or documents, while plus or minus 45 degrees of tilt and swivel dials in viewing angle, and the tall pole gives you real vertical travel to stack one display above the other. You get two mounting options in the box, a C-clamp and a grommet base that fits desks up to 3.85 inches thick, so the stand claims almost no desk surface. A…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Suptek Dual LED LCD Monitor Stand up Desk Mount, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "31.5-inch pole gives real vertical travel for stacked screens"; the main trade-off is "22 lb per-arm limit rules out heavy 32-inch curved panels". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this hold two 32-inch monitors?

Yes, if each panel is 22 lbs or lighter. The MD6802 is rated for screens up to 32 inches and 22 lbs per arm, so check your monitor's weight without its factory stand before ordering.

Does it fit my monitor's VESA holes?

It mounts 75x75mm and 100x100mm VESA patterns, which covers most mainstream displays. Screens using larger patterns such as 200x200mm need a separate adapter plate.

Can I mount the screens side by side instead of stacked?

No. This is a vertical array mount, so both displays ride the same 31.5-inch center pole in an over-under configuration.

How does it attach to my desk?

Two ways are included: a C-clamp that grips the desk edge, and an optional grommet base for desks up to 3.85 inches thick if you have or can drill a pass-through hole.

Can I rotate a monitor to portrait orientation?

Yes. Each mount rotates a full 360 degrees, plus tilts 45 degrees up or down and swivels 45 degrees left or right, so portrait mode for coding or documents is supported.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Compatibility - Dual monitor mount ideal for most screens up to 32" and 22lbs each with 75x75mm or 100x100mm backside mounting holes.
  • Aticulation - Rotate 360°, tilt ±45° up and down, swivel ±45° left and right, extra tall height adjustment along the center pole.
  • Two install options: C-clamp and optional grommet base (fits desk up to 3.85" thickness) save your valuable desk space
  • Integrated cable management - Keeps your desk tidy and clean by organizing your power and AV cables in detachable cable holder.
  • Easy installtion - Step-by-step user manual and organized hardware kit for hassle free mounting.

Full Specifications

Brandsuptek
Colorblack
MaterialAlloy Steel
Model NumberMD6802
Mounting TypeTabletop Mount
Movement TypeRotate, Swivel, Tilt, Articulating
Mfr Part NumberMD6802
Number of Items2
Number of Packs1
Compatible DevicesMonitor
Enclosure MaterialAlloy Steel
Maximum Tilt Angle45 degrees
Two install optionsC-clamp and optional grommet base (fits desk up to 3.85" thickness) save your valuable desk space
Maximum-Supported Screen Size27 inches
Minimum-Supported Screen Size13 inches
Full listing titleSuptek Dual LED LCD Monitor Stand up Desk Mount for 2 / Two Screens up to 32 inch Extra Tall 31.5" Pole Heavy Duty Fully Adjustable Stand Vertical Array (MD6802)

Ready to buy?

Suptek Dual LED LCD Monitor Stand up Desk Mount for 2 / Two Screens up to 32 inch Extra Tall 31.5" Pole Heavy Duty Fully Adjustable Stand Vertical Array (MD6802) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →