Grupo Erik
Grupo Erik Gaming Controller Holder
Bottom line: The Grupo Erik Gaming Controller Holder: Hand-painted resin build, not hollow plastic; main trade-off: zombie styling will not suit every desk setup.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Hand-painted resin build, not hollow plastic
- ✓ Holds headset and controller on one footprint
- ✓ Doubles as a phone stand, works with a case on
- ✓ Gift-ready protective packaging out of the box
Cons
- ✗ Zombie styling will not suit every desk setup
- ✗ Resin is heavier and more chip-prone than ABS
- ✗ Holds one controller only, not a multi-pad rack
- ✗ No listed weight limit for heavier headsets
Manufacturer description
The Grupo Erik Gaming Controller Holder turns desk clutter into a conversation piece. Cast in resin and 100% hand-painted, this zombie-themed stand holds a gaming headset across the top while a controller docks below, so your gear has one dedicated home instead of a pile beside the keyboard. Grupo Erik sizes the cradle to fit official console controllers and most third-party pads, and it doubles as a phone stand that grips even with a case on. You can park a controller here while it charges, which keeps the cable run tidy and off the mousepad. The apocalypse-survivor styling reads as a…
SpecPicks Verdict
SpecPicks scored Grupo Erik Gaming Controller Holder using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Grupo Erik's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this fit my PS5 or Xbox controller?
Grupo Erik designs the cradle for official console controllers and most gaming pads on the market. Check the listing dimensions against your specific controller if you use an oversized third-party model.
What is it actually made of?
Resin, hand-painted 100% by hand according to Grupo Erik. Resin gives it more heft than molded plastic, so it stays put under a headset.
Can I charge my controller while it sits on the stand?
Yes. The holder is designed to hold a controller while it charges, so you can route the cable up to the dock and leave it there between sessions.
Does it work as a phone stand too?
It does. Grupo Erik lists phone-holder duty as a secondary use, and it keeps its grip on most phones even with a case fitted.
Is this a good gift, and how does it arrive?
It is sold as a gamer gift and ships in packaging Grupo Erik designed to protect the paint in transit. It is a safe pick for a gift.
Key Features
- 🎮 Headphone Holder - Well Played! Gamer yes, this gaming headset stand and controller stand has to be yours. Keep all your gaming items tidy with this cool gaming desk accessories but always giving it that original touch that all your rivals will envy
- 🎧 Controller Holder - Zombie Controller Holder. Made of resin to guarantee resistance and 100% hand painted. This stand is built to last, providing reliable support for your gaming equipment for years to come
- 🎮 Phone Holder - Designed to hold almost any gaming controller while they charge, it's also a great phone stand for most mobile phones. Keeps hold even with a phone case. You will become the survivor of the zombie apocalypse with your gaming setup decoration!
- 🎧 Gaming Gifts - A gamer gift that will surprise you! We have taken care of every detail of its packaging so that it arrives in perfect condition when it is shipped and will surprise your special one. Suitable for the official controllers and most headsets on the market
- 🎮 100% Official - At Erik we make sure our products are made of the best materials out there, partnering with the most popular brand and licenses on the market. We pride ourselves on providing quality and durable products since 1997. Check our Amazon catalogue and discover our extensive range of stationery and merchandising products!
Full Specifications
| Brand | Grupo Erik |
|---|---|
| Color | Zombie |
| Material | Polycarbonate (PC), Resin |
| Unit Count | 1 Count |
| Part Number | SOCA01 |
| Model Number | SOCA01 |
| Item Dimensions | 6.69 x 7.28 x 10.63 inches |
| Number of Items | 1 |
| Number of Packs | 1 |
| Special Features | Multi Device |
| Full listing title | Grupo Erik Gaming Controller Holder | Gaming Equipment | Controller Holder Figure | Headphone Stand & Controller | Gaming Accessories for Desk | Gamer Gifts | Halloween Decorations |
Ready to buy?
Grupo Erik Gaming Controller Holder | Gaming Equipment | Controller Holder Figure | Headphone Stand & Controller | Gaming Accessories for Desk | Gamer Gifts | Halloween Decorations is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget Gaming SSDs Under $100 in 2026
- Raspberry Pi Projects for Students (2025 Guide)
- Best Budget Streaming Gear in 2026: 5 Picks to Go Live Cheap
- Best Gaming Mouse for FPS Esports Under $80 (2026)
- Intel Arc A770 16GB for Local LLMs: 2025–2026 Guide
- Best Parts for a Dual RTX 3060 24GB Local-LLM Build in 2026
- Ryzen AI Max+ 'Gorgon Halo' 192GB vs RTX 3060 12GB for Local LLMs (2026)
- Intel Arc Pro B70 vs RTX 3060 12GB: Budget AI + 1440p in 2026
- 1080p Gaming PC Build 2026: Cost, Parts, FPS
- Best Budget AM4 Gaming Build Parts in 2026
- Best CPU for the MSI RTX 3060 12GB: 5600G vs 5700X vs 5800X
- Noctua NH-U12S vs DeepCool AK620: Best Air Cooler for AM5 OC
- Beijing's $295B AI Buildout Wants 80% Domestic Chips — What It Means for GPU Buyers
- Best 1440p Monitor for the RTX 3060 12GB (2026)
- Best SSD for a PS4 Pro Upgrade in 2026
- ATI Radeon 9700 Pro Install Guide: Catalyst Versions, AGP 8x Compatibility, and Period-Correct Drivers
- Running Windows XP Off a 2.5-inch SATA SSD via an IDE Adapter (2026 Guide)
- Local PDF-to-Audiobook on a Raspberry Pi 5: Kokoro 82M + Qwen + llama.cpp
- Build a Budget Local-LLM Workstation Under $1,500: Ryzen 7 5800X + RTX 3060 12GB Benchmarks
- GLM-5.2 vs DeepSeek V4 on a 12GB RTX 3060: Which Open-Weights Model Wins?
- Best Controller for Steam Deck Docked Mode in 2026
- How to run Llama 3.1 8B on Apple M4 Max
- Raspberry Pi 4/5 Wall Mount Case: 3D Printing Guide
- Raspberry Pi 4 8GB vs Pi 5 for a 2026 Homelab: Is the Pi 4 Still Worth It?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090