axGear 2 Ports Dual Bidirectional RS-232 DB9 9-pin Serial Port to PCI I/O Card Adapter
Bottom line: The axGear 2 Ports Dual Bidirectional RS-232 DB9 9-pin Serial Port to PCI is a specs-and-price decision rather than a crowd-consensus one in the expansion cards category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Plug and Play, automatically assigned IRQ and I / O address.
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Used and vintage listings vary by seller and condition — check the listing photos, description and return terms before buying
Manufacturer description
PCI Series Adapter Card 2 PortsFeatures:Plug and Play, automatically assigned IRQ and I / O address.Support PCI I / Q shared.You can manually change the port number of additional serial port card.Consistent with PCI Rev2.1 Agreement.Consistent with standard input and output of 16C550 UART with 16 byte transmit-receive FIFO.Transfer rate up to 1 Mbytes / sec.Two DB9 serial port connectors.Support Hot swapping.Support PC with 32-bit PCI slot, MS Windows 98SE / Me / 2000 / XP /Linux, Vista, Win 7, Win 8.Package Included:1 x 2-port PCI Serial Adapter Card1 x Driver CD
SpecPicks Verdict
SpecPicks scored axGear 2 Ports Dual Bidirectional RS-232 DB9 9-pin Serial Port to… using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. axGear's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Plug and Play, automatically assigned IRQ and I / O address.
- You can manually change the port number of additional serial port card.
- Support PCI I / Q shared.
- Consistent with PCI Rev2.1 Agreement.
- Consistent with standard input and output of 16C550 UART with 16 byte transmit-receive FIFO.
Full Specifications
| Brand | axGear |
|---|---|
| Style | Classic |
| Style Name | Classic |
| Unit Count | 1 Count |
| Model Number | SERIAL-PCI |
| Mfr Part Number | SERIAL-PCI |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Personal Computer |
| Hardware Interface | PCI |
Ready to buy?
axGear 2 Ports Dual Bidirectional RS-232 DB9 9-pin Serial Port to PCI I/O Card Adapter is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- On-Device AI Keyboards: What a Sub-2GB LLM Needs to Run Local
- Retro Console Modding Services: What to Expect in 2026
- Best GPU for 1080p 240Hz Esports: RTX 3060 12GB Build (2026)
- Claude Code Artifacts Just Shipped: What It Adds, and the Local Aider Alternative
- Best Midrange GPU for 1440p Ultra Gaming in 2026
- Best Raspberry Pi Alternatives 2026: 5 SBCs After the Price Hikes
- Best Streaming Setup for Sim Racing in 2026: Cam, Mic, Light
- vLLM on a Single RTX 3060 12GB: Batched Serving Numbers and When It's Worth It (2026)
- Samsung Unveils World's First 4K 360Hz QD-OLED Panel
- Can a Raspberry Pi 4 8GB Run a Local LLM in 2026? Realistic tok/s
- Best CPU Cooler for Ryzen 7 5800X Heavy Workloads (2026)
- Quake 3 + UT99 Dedicated Server on Raspberry Pi 4 8GB: Headless AI-Managed Setup (2026)
- Rescue a Dying Retro PC: Image Your IDE Drive to CompactFlash First
- The Adder at the Heart of Intel's 8087 Math Coprocessor
- Best GPU for Ryzen 5 5500 in 2026 (Budget to 1440p)
- GLM-5.2 Is Now the Most Intelligent Open-Weights Model — and the Most Verbose
- Build a RetroPie Arcade on a Raspberry Pi 4 8GB in 2026
- Surprise AI Bills: Moving LLM Work to a Local RTX 3060 12GB Rig
- How to run Llama 3.1 8B on Apple M4 Max
- How to run Llama 3.1 8B on AMD Radeon RX 7900 XTX
- Mac Mini M4 vs RTX 3060 12GB for Local LLMs: Which Actually Wins?
- AI Rigging 3D Models: The 2026 Hardware Guide
- Mistral Medium 3.5 128B on Local Hardware: MLX 4-bit at ~70GB Explained
- Free Retro Game Emulators: Best Picks for 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090