Cablelera ZADA36PQ-Y-P2 Power Cord Extension & Splitter
Bottom line: The Cablelera ZADA36PQ-Y-P2 Power Cord Extension & Splitter: Splits one NEMA 5-15 outlet into two grounded NEMA 5-15R outlets; main trade-off: adds outlets only; both ends share one 13A, 125V capacity.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Splits one NEMA 5-15 outlet into two grounded NEMA 5-15R outlets
- ✓ Two splitters per pack for two desks, shelves or power strips
- ✓ 14-inch 16AWG leads keep cable clutter behind furniture low
- ✓ Rated 13A at 125V for monitors, PCs, chargers and small appliances
- ✓ Fully molded black build blends in behind desks and media stands
Cons
- ✗ Adds outlets only; both ends share one 13A, 125V capacity
- ✗ 14-inch length can't replace a full-length extension cord
- ✗ Not compatible with NEMA 5-20 or locking plugs
- ✗ Not meant for high-draw equipment
Manufacturer description
The Cablelera ZADA36PQ-Y-P2 is a short Y-splitter power cord. It turns one NEMA 5-15 outlet into two grounded NEMA 5-15R outlets. Each pack has two splitters, so you can fix two crowded spots at once, such as a desk and a gaming shelf. Each cord is 14 inches long, uses 16AWG wire and has a fully molded black finish. The combined load is rated at 13A, 125V. That suits the devices it was designed for: monitors, computers, chargers and small appliances. It also works with any other device that uses a standard three-prong North American plug, including desktop and retro PC setups. Know the…
SpecPicks Verdict
SpecPicks scored Cablelera ZADA36PQ-Y-P2 Power Cord Extension & Splitter using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. Cablelera's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How long is the Cablelera ZADA36PQ-Y-P2 splitter cord?
Each splitter is 14 inches long. It is a short splitter for outlet expansion in tight spaces, not a full-length extension cord.
How many splitters come in the pack?
The listing says 2 pieces per pack. You get two separate NEMA 5-15P to 2x NEMA 5-15R Y-splitters.
Can I run two computers or a PC and monitor off one splitter?
Yes, as long as the combined draw of everything connected stays within the 13A, 125V rating. The splitter adds outlets but does not increase the capacity of the wall outlet.
Will it work with 20-amp plugs or twist-lock connectors?
No. It is built for standard North American NEMA 5-15 plugs only. It is not compatible with NEMA 5-20 plugs, locking plugs or high-draw equipment.
What wire gauge does the cord use, and can I use it outdoors?
The cord uses 16AWG wire with a fully molded construction. The manufacturer lists it for indoor use, so do not use it outdoors.
Key Features
- Splits one standard NEMA 5-15 outlet into two grounded NEMA 5-15R outlets for low- to medium-power devices. Does NOT increase total power capacity.
- Designed for standard North American 125V NEMA 5-15 devices such as monitors, computers, small appliances, and chargers. Not compatible with NEMA 5-20, locking plugs, or high-draw equipment.
- This is a compact splitter with short cable leads, intended for outlet expansion in tight spaces. Not a full-length extension cord. Please review product images and dimensions before purchase.
- Rated for 13A, 125V total load. Combined connected devices must not exceed rated capacity. Fully molded construction for durability and safe indoor use.
- Perfect for desks, power strips, wall outlets, and home office setups where space is limited and outlet splitting—not long-distance extension—is needed.
Full Specifications
| Brand | Cablelera |
|---|---|
| Color | Black |
| Gauge | 16.0 |
| Voltage | 125 Volts |
| Wattage | 1625 watts |
| Amperage | 13 Amps |
| Plug Type | Type B |
| UL Listed | No |
| Unit Count | 2.33 Feet |
| Item Length | 14 Inches |
| Plug Format | Type B |
| Model Number | ZADA36PQ-Y-P2 |
| Input Current | 13 Amps |
| Built-In Media | 2pcs Y power cord |
| Mfr Part Number | ZADA36PQ-Y-P2 |
| Connector Gender | Male-to-Female |
| Power Cord Prong Count | 9 |
| Global Trade Identification Number | 00848078018356 |
| Full listing title | Cablelera ZADA36PQ-Y-P2 Power Cord Extension & Splitter, NEMA 5-15P to 2× NEMA 5-15R, 13A 125V, Short Extension Splitter, Black |
Ready to buy?
Cablelera ZADA36PQ-Y-P2 Power Cord Extension & Splitter, NEMA 5-15P to 2× NEMA 5-15R, 13A 125V, Short Extension Splitter, Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Logitech G502 Hero in 2026: Is the FPS Mouse King Still Worth It?
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming Build
- After the Mythos Cyber-Ops Report, Why Run AI on an Air-Gapped Local Box
- Best AIO Liquid Cooler for Ryzen X3D & High-End Intel (2026)
- NVMe vs SATA SSD for Local LLM Model Libraries in 2026
- Running a Modern SATA SSD in a Windows XP Retro Gaming PC
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5070
- Best GPU for Local LLMs Under $400 in 2026: Why 12GB Still Wins
- Best Gaming Mouse for FPS Esports Under $80 (2026)
- Raspberry Pi OS Moves to the Linux 6.18 LTS Kernel With an Updated LabWC Compositor
- Ryzen 7 5800X vs Ryzen 5 5600G for a Budget Local-AI Workstation
- Gemma 4 26B-A4B NVFP4 vs Qwen 3.6 27B Q4_K_M: Single-GPU Local Inference Benchmarked
- Qwen 3.6 27B Matches Sonnet 4.6 on Artificial Analysis Agency
- Best Raspberry Pi for Klipper in 2026: Pi 4 8GB vs Alternatives
- Qwen3.6-27B vs Coder-Next: Which Local Coding Model Wins?
- Open WebUI — self-hosted ChatGPT for your local models
- AI-Driven Driver Install on WinXP: Vision LLM Walks the Audigy FX Setup
- Running Windows XP Off a 2.5-inch SATA SSD via an IDE Adapter (2026 Guide)
- PCIe Gen2/Gen3 1:2 Analog MUX: Practical Maker Implementation
- gpt-oss 20B vs Phi-4 14B on a 12 GB GPU: Which One Actually Fits?
- Best Sim Racing Wheels for PC and Console in 2026
- Build an Always-On Raspberry Pi Zero W Project: 24/7 FM Radio and More
- Raspberry Pi Projects for Home Automation in 2025
- Crucial BX500 vs Samsung 870 EVO: Best 1TB SATA SSD for Game Storage
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090