RJ45 to RS232, DB9 9-Pin Serial Port Male to RJ45 Cat5 Ethernet LAN Console 3.3Ft
Bottom line: The LFHUKEJI RJ45 to RS232: DB9 male to RJ45 console cable for serial access to routers and switches; main trade-off: only works with devices that have a port labeled 'console'.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ DB9 male to RJ45 console cable for serial access to routers and switches
- ✓ No built-in chip, so there's no driver to install
- ✓ Oxygen-free copper conductors for a clean serial signal
- ✓ Double-shielded to cut interference in crowded racks
- ✓ 3.3ft length reaches from a laptop to a rack-mounted device
Cons
- ✗ Only works with devices that have a port labeled 'console'
- ✗ Not for printers or other serial gear without a console port
- ✗ PCs without a DB9 port need a separate USB-to-serial adapter
- ✗ 3.3ft may be too short to reach from the floor to the top of a rack
Manufacturer description
The LFHUKEJI RJ45 to RS232 console cable gives you a direct serial line from a DB9 port to the RJ45 'console' port found on most routers and switches. At 3.3 feet, it's long enough to reach from a laptop on a rack shelf or a PC sitting next to a network closet. Plug the DB9 male end into your computer's serial port and the RJ45 end into the device's console jack. You can then open a terminal session to change settings, update the device through your PC, or work at its low-level operating layer before the network side is configured. Serial data and network data move in both directions without…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for LFHUKEJI RJ45 to RS232, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cables & connectors category before committing. On the listing's own facts, the case for it is "DB9 male to RJ45 console cable for serial access to routers and switches"; the main trade-off is "Only works with devices that have a port labeled 'console'". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this cable work with my Cisco or other brand router?
The listing says it works with most routers and switches on the market, as long as the device has an RJ45 port labeled 'console.' Check your device's manual for its console pinout before you buy.
Do I need to install a driver?
No. The cable has no built-in chip and works as a plain data-transfer cable. Your terminal software talks to the computer's existing DB9 serial port.
My laptop doesn't have a DB9 serial port. Can I still use it?
Not on its own. The computer end is a DB9 RS232 male connector, so a laptop with only USB ports needs a separate USB-to-serial adapter, and that adapter may need its own driver.
Can I use this to connect a serial printer?
No. The manufacturer says devices without a 'console' port, such as printers, are not supported. The cable is meant for console management of network equipment.
How long is the cable and is it shielded?
It is 3.3 feet long, uses oxygen-free copper conductors and is double-shielded to keep interference out of the signal.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- DB9 RS232 male to RJ45 female console cable for TCP/IP network interface with the doual-way conversion, with the serial port network function, support serial data and network data bi-directional transparent transmission
- Connect the equipment serial port to the RJ45 “console” port on routers, the cable can help engineer through the PC update the network device settings and device understratum operating
- Compatible with most routers switch on the market.Please note that your device interface must have the "console" identification character.We do not support devices such as printers that do not have a "console" port.
- Oxygen-free copper transmission wire, high-speed clear signal transmission.The cable has no built-in chip and does not require a driver. It functions as a data transfer.
- Double-shielded standard to ensure that signal transmission without interference
Full Specifications
| Brand | LFHUKEJI |
|---|---|
| Color | Transparent |
| Model | GU13 |
| Wattage | 600 watts |
| Cable Type | Ethernet, USB |
| Item Shape | Round |
| Unit Count | 1 Count |
| Part Number | GU13 |
| Compatibility | PC, Switch |
| Connector Type | RJ45 |
| Number of Pins | 9 |
| Number of Items | 1 |
| Special Feature | High Speed |
| Connector Gender | Male-to-Female |
| Compatible Devices | Laptop, PC, Printer, Router |
| Data Transfer Rate | 100 Megabytes Per Second |
| Indoor Outdoor Usage | Indoor |
| Compatible Phone Models | no |
| Connectivity Technology | Serial Port |
| Ethernet Cable Category | Cat 5e |
Ready to buy?
RJ45 to RS232, DB9 9-Pin Serial Port Male to RJ45 Cat5 Ethernet LAN Console 3.3Ft is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc Pro B70 vs RTX 3060 12GB for Local LLMs
- Best PC Couch-Gaming Setup in 2026: Controllers, Display, and Audio
- Throw a Modern Retro LAN Party in 2026: The Hardware Checklist
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- GPT-5.6 Sol Ultra Shipped: Cloud vs Local Coding Rig
- Train a Kick Drum AI Model on 6GB VRAM (Linux Guide)
- GPT-5.6 Sol Ships Under Government Access OpenAI Calls Unsustainable
- Local LLM Image Generators: Best AMD GPUs in 2025
- AMD Ryzen AI Halo: Pre-Orders Open for Linux Developers
- Modern CRT Monitor for Retro Gaming: The 2025 Reality Check
- Best Raspberry Pi 4 Starter Kit Bundle for First-Time Robotics Builders in 2026
- OG NeoGeo Stick vs 8BitDo SN30 Pro: Which Feels More Period-Correct for Fighting Games in 2026?
- Raspberry Pi AI HAT+ 2025: TOPS, Price, Setup Guide
- Noctua NH-U12S vs DeepCool AK620 on Ryzen in 2026: Honest Pick
- Does Dual-Channel RAM Matter for Local LLM Inference?
- Best GPU for ComfyUI and SDXL Under $350 — Why the RTX 3060 12GB Still Wins
- Best 1440p Gaming Monitor for an RTX 3060: ASUS TUF 2K vs KOORUI 4K
- FIDECO vs Unitek: Best IDE-to-USB Adapter for Retro Drive Imaging
- llama.cpp vs vLLM for Single-User Local Chat in 2026: Which Backend Fits?
- Best Single-Board Computer for a 2026 Home Lab
- NVIDIA GeForce GTX 10 Pascal GPUs: 10th Anniversary
- RTX 5090 vs RTX 4090 at 1080p Esports: Does the Flagship Help? (Nov 2026)
- Imaging Vintage IDE & SATA Drives in 2026: USB Adapters
- RTX 5070 vs 5080: Which GPU Fits Your Build?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090